Best Soux Chief in 2026

Lifetime cycle tested at U.S. Testing laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure (654-c tested)

Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega process and all push-fitting systems

Allows for installation in 2 × 4 wall cavity

Fits most fun grips, sip and smile cups

Extends use of spill-proof cup

Snaps easily into place for convenient use

★ Lead-free Brass,meets California AB-1953, Vermont, and new federal standards for low lead applications. Can gurantee your family health and safe on potable and non-potable water.Applicable in residential and commercial usage.

★ Inlet 3/8" OD female COMP x 3/8" OD COMP outlet x 3/8" OD COMP outlet . Angle stop add-a Tee-type is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, second faucet and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.

★ Resists corrosion and mineral buildup, rust, and freeze damage.Have a longer using life than iron and iron galvanized products.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.

Coupling for connecting two pipes with the same diameter in a straight run

Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Flashback arrestor set has internal check valves for both oxygen and acetylene

Standard -InchB-Inch fittings for 9/16 -18 threads,B size.

Attach at the regulator.

Direct replacement - this A/C service valve is designed to match the fit and function of the original valve on specified vehicles

Restores functionality - this valve is made to fit and fully restore part functionality after the original valve fails

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Restores heating performance on systems with damaged temperature valves/doors

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Equipped with a 1/2 inch Crimp PEX inlet and 1/4 inch OD compression outlet connections

The Snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch

The box with one-piece box-and-flange design, no additional support framing required

★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead.

★ Size:2 PCS 3/8 inch(OD：Outer Diameter) compression x 3/8 inch(OD) compression

★ FINISH: Chrome-plated finish resists corrosion.

Repair leaking A/C system, restore A/C function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Repair leaking A/C system, restore A/C function.Material:Aluminum

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

You will receive: 2 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 1 hex key, 2 adapters

Model No.: BPV-31 bullet piercing tap valve; Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31

Sturdy material: made of corrosion-resistant metal that won' t wear out or rust over time, a convenient replacement part for you to use

Tee – Full slip tee sweats in-line on 1/2" CTS near problem valve or fixture

Tee – Hose tee arresters install on washing machine supply valves or directly to washing machine

Arrester body: 304 stainless steel - Piston: polypropylene with two EPDM o-rings - Tee body: UNS C36000 machined brass

Compact air admittance valve with PVC adapter

Ideal for a single fixture or group of fixtures; capacity of 160 DFUs (drain fixture units) on a branch and 24 DFUs on a stack

Creates ventilation that prevents the loss of water seals in traps; uses gravity to automatically close seal and prevent circulation of unpleasant bathroom or drain odors

The information below is per-pack only

IRRIGATION VALVE BOX: Houses and protects irrigation system components from damage and keeps them out of sight; Fits over a single valve or underground irrigation accessories

DURABLE PLASTIC: Structural reinforcing ribs provide support and strength to protect items housed inside against damage; Made of durable PP treated with UV inhibitors

This is a genuine OEM replacement part.

Brand name: Honeywell

Model number: SV9501M8129

Can be used as a tank check valve for small compressors or as a component in pneumatic circuits

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Fluorocarbon O-rings for higher temperature and chemical resistance

Gas Valve Replacement: When you need to replace your B-67 gas valve, this compact, low-profile control designed for low capacity space heater applications fills the void where room is limited

Versatility: With an electrical rating range from 250 mV to 750 mV, this gas valve suits various gas types, including natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures

Features: RoHS-compliant 710-502 unit is equipped with three-position 1/2-inch outlets, 1/4-inch pilot outlet tubing, standard NEMA terminals, gas cock dial with off-pilot-on markings and an inlet filtered screen

【Lead Free Brass】: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet.

【Wildely Used】: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc.

【Durable】: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products.

★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead.

★ Size:1/4 inch OD compression x 1/4 inch OD (Outer Diameter) compression.

★ FINISH: Chrome-plated finish resists corrosion.

10 New Service / Access Valves 1/4 SAE x 1/4 O.D. x 2.75" stem

The core is a poppet valve assisted by a spring that is threaded into the steam

Each valve has a core and a cap with valve core remover

★『Perfect Tire Repair Tool Set』: In this set, you will get 50pcs black tyre air valve cap, 50pcs red tire valve core, 5pcs black rubber tire valve stem with cap, 40pcs green and white air conditioning valve core, 2pcs blue and red air conditioning valve cap, 1pc blue dual head valve core remover total 148pcs sorted stored in a transparent box

★『Tire Repairing』: Rubber tire valve stem with cap used for valve mouth, have the effect of dust prevention and protection, Red tire valve core designed with a seal attached to a movable, spring-loaded pin that allows pressurized air to pass when inflating a tire, withstand working air pressure up to 300 PSI

★『Air Conditioning System Seal Kit』: Green and white car R12 air-conditioning accessories and blue and red air conditioning valve cap, suitable for car air conditioning replacement and maintenance, can bear the oil, bear the impact, bear the corrosion, watertightness

PLEASE NOTE: 1/4" MALE NPT THREADED INLET CONNECTION APPROX 0.54 INCHES OUTSIDE DIAMETER

Brass construction and stainless steel spring for corrosion resistance. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure.

250 degrees F maximum temperature for use in high temperature applications

Lifetime cycle tested at U.S. Testing laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure (654-c tested)

Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega process and all push-fitting systems

Allows for installation in 2 × 4 wall cavity

Fluval Air Pump replacement part

Fluval's 2 Way air control valve is suitable for all air pumps.

Air Pumps help keep your aquarium thriving

Tee fitting for connecting and branching pipes in a range of fluid transfer applications

1/2" female NPT threads on each end for connecting pipes with male-threaded ends

CA360 brass for strength and resistance to corrosion

Genuine Kohler part

Dual flush valve seal

Tank to bowl gasket seal

★ 【Material】: Heavy Duty Solid Brass with solid brass nuts and a high -performance celcon stem provide a watertight seal,strong and durable.Chrome plated heavy brass construction with metal handle.

★ 【Firm And Durable】: Solid Brass for corrosion resistance, high temperature ductility and low magnetic permeability. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).

★ 【Function】: The double outlet water can be controlled at the same time through the control valve, and the water supply can be stopped to some water equipment without shutting down the entire water supply system. Widely used in garden irrigation and toilet water supply systems.