Best Studor in 2026

Compact air admittance valve with PVC adapter

Ideal for a single fixture or group of fixtures; capacity of 160 DFUs (drain fixture units) on a branch and 24 DFUs on a stack

Creates ventilation that prevents the loss of water seals in traps; uses gravity to automatically close seal and prevent circulation of unpleasant bathroom or drain odors

Air admittance valve made of flame-retardant, high-tensile-strength polycarbonate resin (UV rated for outdoor installation)

Great for commercial applications including airports, boiler rooms, schools, and hospitals; capacity of up to 160 DFUs (drain fixture units) on a branch and 24 DFUs on a stack

Creates ventilation that prevents the release of foul air from the drainage system and the loss of water seals in traps; uses gravity to automatically close seal and prevent circulation of unpleasant bathroom or drain odors

★ Lead-free Brass,meets California AB-1953, Vermont, and new federal standards for low lead applications. Can gurantee your family health and safe on potable and non-potable water.Applicable in residential and commercial usage.

★ Inlet 3/8" OD female COMP x 3/8" OD COMP outlet x 3/8" OD COMP outlet . Angle stop add-a Tee-type is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, second faucet and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.

★ Resists corrosion and mineral buildup, rust, and freeze damage.Have a longer using life than iron and iron galvanized products.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.

Heavy-duty, double-beaded diaphragm seal ensures leak-free performance

Loosen the four captive bonnet bolts to install the diaphragm in minutes

Captive plunger ensures easy access to valve solenoid and eliminates the possibility of lost parts during disassembly

Coupling for connecting two pipes with the same diameter in a straight run

Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Flashback arrestor set has internal check valves for both oxygen and acetylene

Standard -InchB-Inch fittings for 9/16 -18 threads,B size.

Attach at the regulator.

Equipped with a 1/2 inch Crimp PEX inlet and 1/4 inch OD compression outlet connections

The Snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch

The box with one-piece box-and-flange design, no additional support framing required

Tee – Full slip tee sweats in-line on 1/2" CTS near problem valve or fixture

Tee – Hose tee arresters install on washing machine supply valves or directly to washing machine

Arrester body: 304 stainless steel - Piston: polypropylene with two EPDM o-rings - Tee body: UNS C36000 machined brass

Compact air admittance valve with PVC adapter

Ideal for a single fixture or group of fixtures; capacity of 160 DFUs (drain fixture units) on a branch and 24 DFUs on a stack

Creates ventilation that prevents the loss of water seals in traps; uses gravity to automatically close seal and prevent circulation of unpleasant bathroom or drain odors

Can be used as a tank check valve for small compressors or as a component in pneumatic circuits

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Fluorocarbon O-rings for higher temperature and chemical resistance

Replacement diaphragm for orbit-fits automatic 3/4-inch. (57100) and 1-inch. (57101) internal bleed valves

Connects sprinkler timers to valves

Reliable and long-lasting

Hunter 332100 Valve Diaphragm Assembly

For Hunter PGV 1 inch Valves and all ASV and SRV

【Lead Free Brass】: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet.

【Wildely Used】: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc.

【Durable】: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products.

Lifetime cycle tested at U.S. Testing laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure (654-c tested)

Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega process and all push-fitting systems

Allows for installation in 2 × 4 wall cavity

Diaphragm assembly for the Irritrol 205 series valves

Does NOT fit into other Irritrol valve series like the 2400/2500 valves

Valve not included

Tee fitting for connecting and branching pipes in a range of fluid transfer applications

1/2" female NPT threads on each end for connecting pipes with male-threaded ends

CA360 brass for strength and resistance to corrosion

UNIVERSAL FIT: Features Standard FIP COMP x MIP COMP x MIP COMP Connections to Fit Your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, and Supply Lines.

SPLIT YOUR WATER SUPPLY: This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways. For Example, This Will Allow You To Hook On Your Icemaker Supply Line to Your Kitchen Sink Supply in Minutes! Easy, Cheap, and Safe Solution.

SUPERIOR QUALITY: One-Piece Solid Brass Body Provides Strength, Durability, Performance, and Corrosion Resistance

Certified by the American society of sanitary engineering to the ANSI/asse 1010-2004 standard

Lifetime cycle tested at U. S. Testing laboratories to withstand 10, 000 shock cycles. Factory tested to withstand 500, 000 cycles without failure (654-c tested)

Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega propress and all push-fitting systems

🎈APPLICATION: For installation between the regulator and hoses

🎈SPECIFICATION: Standard “B” Fittings (9/16"- 18 UNF) fits most twin hoses

🎈NOTE: The acetylene arrestor in this set can also be used for Propane or Mapp gas.

SHOCK PREVENTION: stops pipe banging noise common in the plumbing system

REDUCE STRAIN: mini water hammer arrestor reduces the pressure on plumbing system joints

EASY INSTALL: installation of hammer arrestor only requires simple tools

Flashback arrestor set has internal check valves for both oxygen and acetylene

For installation between the torch and hoses

Standard “B” Fittings (9/16"- 18 UNF) fits most twin hoses

Heavy duty molded construction.

For use with various models of Orbit

Replaces worn out and damaged Anti-Siphon diaphragms

Prevent water hammer noise and absorb shock and vibration，protect your plumbing system

Connection: 3/4"GHT F x 3/4"GHT M

Max working pressure: 250psi, temperature range 33 deg F to 180 deg F

Straight copper water hammer arrester AA size,

1/2" Male pipe connection Can be installed in any direction;

Maximum working temperature is 250F,

Straight stainless steel water hammer arrester

AA size, 1/2" Male pipe connection

Can be installed in any direction;

Automatic Sprinkler Valve

Replacement Diaphragm That Fits Lawn Genie L6010, L6034, Ls6010, And Lf6010

Fits Rain jet Models 204, 710a, 711a, 712a, 713a, Rj711, Rf713, And The Lg, And PR Series

Commercial quality Oxygen - Hydrogen Flashback Arrestor w/internal check valve & porous metal shield. Rated at 116 liters per minute, or 7000 liters per hour. Maximum working pressure is 140 psi (10 bar).

All brass heavy duty housing. Fits 1/4 ID hose.

For best results minimum operating pressure 2 PSI