Best Us Solid Gas Welding Valves in 2026

Never run out of propane with our Bulit-in gauge

Comes Pre-purged and ready to fill

High grade Steel welded construction

Gas Valve Replacement: When you need to replace your B-67 gas valve, this compact, low-profile control designed for low capacity space heater applications fills the void where room is limited

Versatility: With an electrical rating range from 250 mV to 750 mV, this gas valve suits various gas types, including natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures

Features: RoHS-compliant 710-502 unit is equipped with three-position 1/2-inch outlets, 1/4-inch pilot outlet tubing, standard NEMA terminals, gas cock dial with off-pilot-on markings and an inlet filtered screen

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Dante Combo Pack with Angled Globe Valve, 3-Inch Chrome Floor Plate & Key

Material (Key & Floor Plate)-Zinc Die Cast; Chrome Plated

Cleanliness-Heats chimney quickly causing fireplace to draw smoke immediately up the chimney, never into the room

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

1/2" Brass direct acting with NBR gasket.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

This is a Brand New Upgraded Honeywell Furnace Smart Gas Valve.

Operates on 24 volts.

This valve comes with instructions and all the hardware you may or may not need to install it!

Price For: Each Item: Gas Valve Inlet Size: 1/2" Inlet Pressure Tap: Yes Gas Type: NG/LP Ambient Temp. Range: 58 to 90 Degrees F Coil Volts: 750mV BtuH Capacity: 70, 000 Outlet Size: 3/8" Valve Type: Low Capacity Side Taps: No Country of Origin (subject to change): Mexico

Suitable for a wide range of gas-fired appliances including residential furnaces, roof-top furnaces, residential boilers, unit heaters, infrared heaters, space heaters and commercial cooking units

Replaces SV9500, SV9501, SV9502, SV9601, and SV9602 controls as noted below

Ignition sequence includes timed trial for ignition

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

A.O. Smith Gas Valve

Fits With A.O. Smith Water Heaters

Model Number: 9005964005

AT PRESENT WE DO NOT SHIP TO CALIFORNIA

New Sherwood CO2 tank valve

CGA320 outlet

Country Of Origin: United States

Item Package Weight:1.9 lbs

Product Type:Food Service Supply

1. The plastic conversion nozzle can be directly put on the cassette tank (converted into an inflatable tank)

2. Butane cassette tank -filled valve type torch nozzle connector converter

3. Only used for cassette canisters, not for canisters!

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

1- Honeywell Furnace Gas Valve VR8345H4555

This is a genuine OEM (Original Equipment Manufacturer) part.

Use genuine OEM parts for safety reliability and performance.

Color-coded for gas service to provide added Safety

Internal check valves designed to prevent reverse flow and accidental mixing of oxygen and fuel gases

Torch and regulator models provide downstream and upstream protection

★Built-in check valve prevents the reverse flow of gas.High quality brass construction, rugged and corrosion resistant. Easy to control, check, clean and repair.

★High quality brass construction, case is rugged and corrosion resistant. Solid Brass construction for long life, 100% tested for reliability.

★Color coded for safety. ( defined in Blue/Green in different country)

Applicable: The water level control valve is suitable for water tower tanks, solar power, toilets, aquariums, agricultural irrigation, food machinery, heaters, livestock drinking water and swimming pool water control.

Premium ABS: This water tower interior valve is made of selected premium ABS material so that it is durable and has long service life.

Water Quality No Required: No requirement for water quality, no fear of sediment, this valve is suitable for aquaculture, no need to worry about colloidal substances blocking the valve.

Smart valve controller that is used in gas/water valve by manual operation or automatic control.

It could match with any gas alarm or flood alarm. When it test the gas or water, alarm will send out the signal to close the valve.

The controller can be installed on household gas pipe or garden water pipe, suitable for a variety of pipe sizes, such as 1 inch, 1.25 inch.

STABLE AND SENSITIVE: Valve controller adopts semiconductor sensor, with high stability, small sensitivity drift and so on; Support sensor fault detection; Microprocessor intelligent control; High performance and reliable semiconductor sensor control

APPLICABLE SCENARIO: This smart valve controller is mainly used to the place where applicable gas(such as liquefied petroleum gas, gas, biogas, etc.) may leak, can detect whether the gas leaks and ensure the safety of people life

BOTH AUTOMATIC AND MANUAL: Our valve manipulator adopts electric and manual transfer clutch with innovative technology, enabling the manipulator to automatically and push the electric switch, which can manually open the valve in the event of power failure and maintenance to double safety

This valve seat reamer has a storage box for easy organization and storage of tools for easy carrying.

Our motorcycle valve repair displacement cutters are made of alloy material, high strength, less deformation and more durable.

The valve sest cutter set is suitable for more vehicle models, for Jialing 145125, for Honda GL145, for Sanyang SY125, for Haowolf 125RS3A, for Sanyang Xia Xing ZH125 ZH125A XS125B ZH150, for Honda GL125, for Wuyang Honda WY125A WY125F.

K,GAS VALVE/VENTURI,BTH 199/250,101

OEM replacement part

Package Dimensions: 5.0 H x 9.0 L x 5.0 W (inches)

Package Weight: 2.3 pounds