Best Highcraft Gas Welding Hoses in 2026

3/8" ID Thermo Plastic Hose Assembly including a 3/8" MNPT x 1/2" Female Flare Swivel

40" Overall Length

Maximum Pressure Rating - 350 PSI; Temperature Range : -40 degree Fahrenheit to 140 (-40 degree Celsius to 60 Celsius)

Grade "T" Twin Wedling Hose for iots use with Propane, Alternative Fuel Gases and Acetylene

Diameter: 1/4" Fittings: Type: B - B Size: 9/16"-18 LH for Fuel gas & Type: B - B Size: 9/16"-18 RH for Oxygen

Grade "T" twin welding hose is specially designed to resist the effects of the oils in propane. It is also more weather-resistant.

25' Insert Gas Hose for welding applications

Welcome brand

With inert gas fitting

Double Welding Hose

B and B fittings

R Grade

For its use with Flowmeters for Shield Gas in TIG and MIG Welding

Gas Service: Argon, Argon/CO2 Mixtures, Helium

Outlet Connection: 5/8"-18 Male

Type: Hose to Torch

Gas Service: Fuel & Oxygen

Maxiumum working pressure: 29PSI for fuel gasses, 145 PSI for oxygen

Gas service: air acetylene

country of origin:Mexico

package weight : 1.15lbs

GET THE JOB DONE: The ABN 50 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects; Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site

PERFECT SIZE FOR YOUR NEEDS: 50 foot torch hose length (15.24m) allows you to safely keep the tanks away from the torch tip while servicing any area on your vehicle; Oxy Acetylene torch kit welding gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate

FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit; Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment

TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R.

1/4” × 25FT: The length of each welding hose is 25 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar).

HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these features make it ideal for long-term use.

High BTU Gas Connector with 1" Outer Diameter; Yellow/Stainless Steel

36" Long with 3/4" FIP x 3/4" MIP Fittings; Gas Connector is 100% Leak Tested

Designed and Engineered for Safe, Optimal Flow Rate; Up to 290K BTU Flow Capacity

CONSTRUCTION ✔ 1/4" Rubber Grade T hose with Type B Fittings on both ends. A big upgrade in durability and wear resistance from typical Grade R hose.

NO MORE FRAYED ENDS ✔ Built-in strain relief to prevent hose end damage

PRESSURE ✔ This hose has a 300 PSI working pressure, and an 800 PSI burst pressure

QUALITY ✔ Premium 20FT Rubber Hose - 200psi working pressure, 800psi burst pressure

CONNECT ✔ Crimped 5/"8 UNF-18RH inert gas fittings on each end. Brass material. This hose will thread into most MIG and TIG welders with a standard inert gas fitting.

COMPATIBLE ✔ with argon, CO2, helium and any other welding gases

Hose Length:119 inch/10 ft

5/"8 UNF-18RH Fittings

200PSI Working Pressure - 800PSI Burst Pressure

FOR GAS DRYER AND WATER HEATER. This stainless steel gas line hose has a 102,000 BTU capacity, designed as a gas connector for gas dryers and water heaters. 30 in. long with a 1/2” outer diameter and 3/8” inner diameter. Includes 1/2” FIP and 3/8” FIP stainless steel fittings.

CORRUGATED DESIGN FOR FULL FLEXIBILITY. A corrugated gas appliance gas connector offers maximum flexibility, as the corrugated design makes for a flexible gas hose by allowing to bend and snake the yellow coated gas line connector into small spaces, bends, and corners.

REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds.

EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility

EZ-Fluid (1/2" ID) 3/4" MIP x 3/4" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use

Comes with MIP and FIP flare fittings. Fits on 3/4" FIP Gas valve or 3/4" Flare x 3/4" FIP Gas Valve

【Compatible with Both Oxygen and Acetylene】 Our twin gas welding hose is color coded. The green one is for Oxygen and the red one is for Acetylene and fuel gas. What you should note here is that the maximum working pressure of our oxyacetylene twin welding hose is 300psi. Broken pressure up to 900psi.

【High Quality Rubber Material】 Made of high quality rubber material, our rubber welding hose be used on extreme environment. Not only does it have excellent performance in low temperature, even in subzero temperatures, but also has good oil and abrasion resistance, which prolongs the life of the hose in a maximum effect.

【Sufficient Length and Standard Diameter】 The whole length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. Other than that, with standard diameter, 1/4”, our oxyacetylene twin welding hose has wide application, which meets most people’s needs.

Model Number: 269815

Item Package Length: 12.49999998725"

Item Package Width: 7.99999999184"

Fits all Hot Max torches

UL/CSA Listed hose

5/16-Inch ID UL/CSA Listed hose, 350 PSI rated, all brass fittings and ferrels

Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body.

30 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator.

300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather.

Premium quality gas hose (1/4"-ID, rubber, B-B size fitting) with various length, flowmeter regulators (flowgauge) HRF-1425 and AF150-580 series for Argon and Argon/CO2 mix for use with MIG/TIG welding and other industrial applications.

HRF-1425 flowmeter regulator: UL-listed medium duty Victor style solid brass design and piston type constructure. Combines body and flowmeter in one unit. Flow tube is marked and calibrated for Argon and Argon/CO2. Max inlet pressure 3,000 psig. 25 psig pre-set pressure. Up to 50 CFH for Argon. Connection: CGA 580 (Inert) inlet and 5/8"-18 RH(F) outlet.

AF150-580 regulator/flowmeter: UL-listed Victor style 150-series (ref. p/n 0781-1103) provides light weight, small size and better budget but the same features as larger regulators. 50mm gauges. 1.90 lb. Single stage design and stem type seat mechanism. Max inlet pressure 3,000 psig. Up to 60 CFH for Argon. Connection: CGA 580 (Inert) inlet and 5/8"-18 RH (F) outlet.

25 FT

3/16 in

B Fitting Connections (9/16" - 18)

Proudly Made In USA

Oxyacetylene Twin Welding Hose 12 Ft. X 3/16 Inch I.D

A Fitting Connection (A=3/8 Inch - 24)

Master Elite Premium Quality 25-foot Acetylene / Oxygen Torch Hose Twin Pack. A durable, flexible twin hose set designed for transporting oxygen and acetylene gases to your welding torch, brazing, soldering, and cutting equipment. These R-grade long-lasting hoses are ideal to use while working on all of your metalworking projects.

Both the oxygen hose and acetylene gas hose have a 1/4-inch (6.3mm) (ID) inner diameter and a 1/2-inch (13mm) (OD) outer diameter and have a maximum pressure of 300 PSI (20 Bar) to supply an optimal flow rate. The hose set has a color-coding system, so you can distinguish that the green hose is for oxygen and the red hose is for acetylene, and this will ensure safe and accurate connections to your regulator and oxy torch.

All four hose ends of the twin welding hose set come with standard size B threaded fittings. The fitting sizes are 9/16"-18 LH left-hand thread for the red acetylene hose and 9/16"-18 RH right-hand thread for the green oxygen hose, which enables the hoses to connect onto existing standard regulators and torches.

1/4 inch Grade-T, premium quality, twin welding hose. 15 foot.

All Fuels: acetylene, propane, etc. and oxygen.

Ends: B-Fittings, 9/16 thread.

Occupational Health & Safety

Country of Manifacturer: United States

Manufacturer: Miller Electric

High quality rubber hose, good toughness, high pressure resistant, anti-aging. Rugged brass connector, not easy to corrode, good stability.

Precision machined threads ensure firm connection. High flexibility hose, can be bent randomly without deformation.

Used as the hose connecting the regulator flow meter to a MIG welding machine or wire feeder to deliver shielding gas to the MIG gun.

Item Weight: 1.06 lb

Country of Origin: United States

Brand name: BrassCraft

Excellent Rubber Material: Grade R rubber material makes this Acetylene / Oxygen Torch Hose for heavy duty, Flexible in cold weather – temperature range: -40°F +150°F, resitant to kink, abrasion, UV and oil.

High Strength: This spiral synthetic yarn reinforced rubber oxygen hose and acetylene gas hose is 1/4 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure

Come with standard size B threaded fittings and Bend Restrictors: The fitting sizes are 9/16"-18 LH left-hand thread for the red acetylene hose and 9/16"-18 RH right-hand thread for the green oxygen hose, which enables the hoses to connect onto existing standard regulators and torches. Bend restrictors reduce kinking and help to increase the life of the Acetylene / Oxygen Torch Hose

Great for preventing flashback from occurring

Prevents personal injury and damage to equipment

They stop the reverse flow of gas as well as extinguishing flashback flame

High flexibility hose, can be bent randomly without deformation.

High quality rubber hose, good toughness, high pressure resistant, anti-aging.

Rugged brass connector, not easy to corrode, good stability.