Best Screen Printing Consumables Screen Printing in 2026

This rack is used for placing squeegee and scraper, it can hold 6 pieces squeegees at the same time.

Non-Slip Design: There are non-slip mats installed at the bottom of the rack, and it can be put on any platform stably. The installation is simple, you only need to fix a few screws to complete the installation and put into use.

Easy to adjust: The shelf can be stretched from left to right and front to back. It can hold a squeegee with a minimum size of 8cm (3 inch); a squeegee with a maximum size of 20cm (8inch). You can adjust to fit different sized squeegees according to your needs.

【𝐏𝐚𝐫𝐚𝐦𝐞𝐭𝐞𝐫】Exposure Area: 20"x20" (50x50cm); Glass Size: 13.7"x17.7"x0.3" (35x45x0.8cm); Rubber Subplate Size: 20"x24" (50x60cm); Light Tubes Power: 26W/pc; Wavelength: 365nm 【26W UV tubes】The exposu

【𝟐𝟔𝐖 𝐔𝐕 𝐭𝐮𝐛𝐞𝐬】The exposure unit is exposed of two 26W UV tubes, which can be swivel adjusted while exposing. The holders can be easily installed because of the two-way clamps; besides, it can be adjusted in different heights and angles to satisfy different exposing demands.

【𝐓𝐢𝐦𝐢𝐧𝐠】The equipped countdown timer makes it easier for exposing time controlling. This simple UV Exposure Unit Kit is especially designed for personal usage in screen printing; it is easy operated and with very low cost, which will also be the best choice for new hand to start screen printing business.

This press come with bracket. It help you install the platen more easily. The platen can be moved back and forth. Two stations can be put at 2 angles(90° & 180°)

Simple, but rational and more practical constructions. Table type and combinatorial design saves place and convenient for transportation.

Adjustable double-spring devices are available for screen frames of different weight.

✅【𝐋𝐚𝐫𝐠𝐞 𝐂𝐚𝐩𝐚𝐜𝐢𝐭𝐲】The rack is used for placing squeegee and scraper,it can place 10 pieces squeegees and 5 pieces scrapers at the same time. You can also place other tools according to its space.

✅【𝐒𝐭𝐚𝐛𝐥𝐞 𝐚𝐧𝐝 𝐍𝐨𝐧-𝐬𝐥𝐢𝐩】 The special triangular design is stable and does not deform. There are non-slip mats installed at the bottom of the rack, and it can be put on any platform stably.

✅【𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥】The machine adopts full metal structure and all parts are made of high quality material. It adopts advanced electrostatic spraying process, which is resistant to ink or other chemicals, easy to clean, does not rust, and has a long service life.

The is a desktop storage rack, it is used for placing squeegee /spatulas and ink bottles. Three layers can hold 5 pieces squeegees and 7 pieces spatulas, each layer could place 3-4 bottle ink or some other chemicals.

Note: This listing only sell the holder, not include any squeegee or ink.

The partition in the middle can be adjusted up & down, so it will suit for different height of bottles. Squeegee must be bigger than 6" / 16cm

【Fast and Even Drying】The inside installed axial flow fan makes the hot air in circulation, which guarantees an equal temp in cabinet and can improve drying efficiency meanwhile. The heating plates are adopted the newest blade and unit type, with double-heat, low powercan save power 70-90% and high heat efficiency.

【Intelligent Temp Controlling System】It adopts hierarchical (100 levels) temp-adjusting system; users can adjust temp according to ambient temperature and different materials. Its temp can be adjusted according to the heat resistance of screen mesh. When the room temp is 77℉ (25℃), its highest temp can reach 126℉ (52℃).It can operate according to your set temp next time because of its automatic memorizing function.

【Long Service Life】The machine adopts electrostatic spraying no rust.The built-in axial flow fan can normally be used for about 20,000 hours. It usually takes 2-4 minutes to well dry the screens coated with the photosensitive emulsion.

Movable wheel and height adjustable Stand. Foundation is consistent with heating box ,stable, saving-space and overcoming the flaw caused by traditional “十”that easily gets knock and stuck.

Easy operation: After well installed, connect the power supply and turn on the switch and then it will work automatically.

Sturdy design with powder coated housing to prevent rust. Easy assembly. with a few bolts you have a flash that's ready to be put to work.