Best Dbparts Screw Terminals in 2026

PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs.

WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore.

RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute).

【Safe and Reliable】Idong Power distribution block Selected flame-resistant material, safer than normal plastic,internal Copperplate conductor material, better conductive properties,And nickel-plated which has a long life, no corrosion, anti-aging

【Easy to use】First insert the wire into the ring terminal, then open the protective cover, and finally pass the screw through the terminal, and tighten the screw to fix the terminal. The wires will not come loose.

【Universal product】 providing maximum voltage: 300V AC, 48V DC and 130A AC, 150A DC current,Up to 10 circuits can be connected to a row. good protection for your boat, car, RV

Material: the base is made of hard plastic, the circuit board is made of copper, stainless steel terminal, PC protective sleeve, durable.

Model: Red base, M6 terminal stud x4, M4 screw terminal x 6.

Features: Maximum voltage: 300V AC, 48V DC. Maximum continuous amperage: 130A AC, 150A DC.

FANTASTIC DESIGN: 2 position, 3 position will be sold together. two row, 600V 36A, terminal block.

GREAT SIZE: 21 x 21 x 21 mm/0.83 x 0.83 x 0.83 inch, 33 x 21 x 21 mm/1.22 x 0.83 x 0.83 inch.

MODEL: H2519-2 and H2519-3. Package quantity: 5pcs.

UL 600V

UL 1/0-12AWG

UL 150A

Fully Customizable Kit

UL Listed 600V

UL Listed 12-22 AWG

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

【12 POSITION & 3A】12 position, 3A, 380V, 2 row terminal barrier strip wire connector

【SUITABLE WIRE】For cable: 1.5-2.5mm²

【SAFE & RELIABLE】Each pair of terminals is insulated from the next, preventing circuits from disorder.The set screws secure wires reliable contact and help prevent accidental contact with the terminals

【Parameter】 - Model:E/UK ; Mounting rail width: 35mm/1.38" ; Length: 42.1mm/1.66" ; Width: 9.5mm/0.37" ; Height: 35.3mm/1.39"

【Material】 - This terminal block is made of plastic material, and the screw fixed type is suitable for din rail

【Features】 - The sturdy structure can be firmly locked on the din rail. It is easy to insert the wire, and the screw terminal can firmly fix the wire

【High quality PCB carrier】This Terminal Block Connector is a High quality PCB carrier.

【 mount on DIN rail 】This Terminal Block Connector Can be mounted on DIN rail with width 15/32/35mm.

【application】This Terminal Block Connector is Suitable for PLC, Mitsubishi Servo and DIN rail mount.

Pitch: 2.54mm 0.1"

Pin Number: 5

Rated Value: 300V 10A

8 Pin PCB Screw Terminal Block Connector: Rated Value : AC 300V, 16A, Pitch : 2.54mm/0.1"

High Quality: PCB Screw Terminal Block Connector Made of ABS Plastic, Electric Parts; Screw Terminals Wire Sizes: 18AWG to 26AWG

Quick Connection: Screw Terminal On Header Provide Secure Connection and Quick Disconnection,Very Easy to Install

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x 8-32 Screws with captive star lock washer, Stud terminal: 1 x 10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

【12 POSITION & 3A】12 position, 3A, 380V, 2 row terminal barrier strip wire connector

【SUITABLE WIRE】For cable: 1.5-2.5mm²

【SAFE & RELIABLE】Each pair of terminals is insulated from the next, preventing circuits from disorder.The set screws secure wires reliable contact and help prevent accidental contact with the terminals

Pitch: 2.54mm 0.1"

Pin Number: 4

Rated Value: 300V 10A

Pitch: 2.54mm 0.1"

Pin Number: 12

Rated Value: 300V 10A

🛒Material: PC material shell, high toughness and not easy to break, transparent plastic protective cover, dust-proof and scratch-proof protection wire connector

🛒Features: Compact and not easy to fall off, the gasket at the wiring will not loosen, and it is more firm

🛒Easy installation: Comes with a Phillips screwdriver for easy installation and meets your needs

Package Dimensions: 10.0" (L) x 8.0" (W) x 8.0" (H)

Product Type: Electronic Component

Package Quantity: 1

Item Package Dimensions:12.192 Cm L X4.572 Cm W X1.905 Cmh

Product Type:Terminal Block

Iten Package Weight:0.050 Pounds

The Mega 2560 Prototype Screw Terminal Block Shield Board is an accessory for the Arduino Mega 2560 microcontroller that provides a convenient way to connect external wires using screw terminals.

No Welding Required: The Mega 2560 Proto Screw Shield is Pre-soldered. It can be used for prototyping and experimenting with electronic projects to connect external wires without the need for soldering.

All signal ports are clearly named and labeled on both sides of the board for quick wiring.

Pitch: 2.54mm 0.1"

Pin Number: 7

Rated Value: 300V 10A

【Electrical Test Passed】This is PLC breakout board can be mounted on DIN rail with width 15/32/35mm,Suitable for PLC and DIN rail mount,has been assembled, and electrical test passed.

【Rated Voltage】: 48V, rated current is 1A / per pin.

【Terminal Pitch】: 2.54mm / 0.1" screw terminal block.

【Parameter】 - Model:UK three screw fixings ; Mounting rail width: 35mm/1.38" ; Length: 50mm/1.97" ; Width: 9.5mm/0.37" ; Height: 35mm/1.38"

【Material】 - This terminal block is made of plastic material, and the screw fixed type is suitable for din rail

【Features】 - The sturdy structure can be firmly locked on the din rail. It is easy to insert the wire, and the screw terminal can firmly fix the wire

EASY INSTALLATION - We provide 3 kinds of terminal blocks (3/6/10 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. All our products are certified and inspected, and the quality is trustworthy

SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide jumpers to help customers distinguish positive and negative wire when installation.

RatedVoltage_V : 600V , RatedCurrent_A : 30A