Best Dbparts Screw Terminals in 2026

PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs.

WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore.

RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute).

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal block that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Practical Terminal Block Kit:How to clean up your cluttered wire connection?Our double row screw terminal strip block can help you to connect bare wires to avoid clutter, making wiring connection simpler and more efficient.This way you can easily disconnect a wiring branch without taking down the entire system.

Product Feature:The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite; We also provide thick copper heat shrink wire connectors to ensures strong secure crimping every time.

Heavy Duty:The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance. High-quality insulated fork wire connectors kit is thick copper,with safe and durable.

【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 20pcs terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers, 1pcs 8" aluminum RoHS Rail, 4pcs ZB6 Marker strip.

【Terminal Blocks UK2.5B】The UK2.5B universal screw DIN rail terminal block series has the typical features which are decisive for practical applications. Made from engineering flame retardants nylon PA66 with brass screw metal.It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.

【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function.

Product name: screw terminal strip

Material: metal & plastic; rated value: 600V 25A

Size: L11.5 x W3 x H1.9 cm; color: black & GOLD Tone

★ Product ★ - A pair of 12V power distribution block, includes a red positive power distribution block and a black negative power distribution block.

★ 250A Rating ★ - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.

★ 5/16" Stud Terminal ★ - The battery bus bar terminal block includes 4 x 5/16" studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires.

Features: Marine bus bar junction block 12v, these busbars will come in pairs, include one positive bus bar (red one) and one negative bus bar (black one).

Rating: Max voltage: 300V AC, 48V DC. Max continuous amperage: 130A AC, 150A DC. This battery distribution block will be suitable for both AC and DC systems.

Terminals: Each battery bus bar 12v includes - M8 (5/16") terminal studs x 4 and M4 (#8) screw terminals x 6, two power bus bars in the package - one positive bus bar and one ground bus bar.

★ Product ★ - A pair of 12V power distribution block, includes a red positive power distribution block and a black negative power distribution block.

★ 250A Rating ★ - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.

★ 3/8" Stud Terminal ★ - The battery bus bar terminal block includes 4 x 3/8" studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires.

【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 20pcs terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers, 1pcs 8" aluminum RoHS Rail, 4pcs marker strip.

【Terminal Blocks UK2.5B】The UK2.5B universal screw DIN rail terminal block series has the typical features which are decisive for practical applications. Made from engineering flame retardants nylon PA66 with brass screw metal.It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.

【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function.

【Safe and Reliable】Idong Power distribution block Selected flame-resistant material, safer than normal plastic,internal Copperplate conductor material, better conductive properties,And nickel-plated which has a long life, no corrosion, anti-aging

【Easy to use】First insert the wire into the ring terminal, then open the protective cover, and finally pass the screw through the terminal, and tighten the screw to fix the terminal. The wires will not come loose.

【Universal product】 providing maximum voltage: 300V AC, 48V DC and 130A AC, 150A DC current,Up to 10 circuits can be connected to a row. good protection for your boat, car, RV

【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 20pcs 5 colors terminal blocks, 2pcs ground blocks, 2pcs jumpers, 2pcs E/UK end brackets, 3pcs UK-2.5BG end covers, 2pcs ZB6 Marker strip, 2pcs Marking clips, 1pcs 8" Rail.

【Terminal Blocks UK2.5B】The UK2.5B universal screw DIN rail terminal block series has the typical features which are decisive for practical applications. Made from engineering flame retardants nylon PA66 with brass screw metal.It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.

【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function.

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

Safe Design : the terminal strips set come with transparent protection covers whick will shelter most exposed contact areas to reduce the risk of accidental touching, mounting the snap-in plastic covers after wiring. red and black jumpers to help customers distinguish positive and negative wire when installation

Neat Wiring Jobs : The dual row terminal strips are easy to install,you just need to fix wires with screws,you can connect each power wire very cleanly to each source (ground, battery, and ignition on), disconnect a wiring branch without taking down the entire system

Heavy Duty & High Quality : the GAJING terminal/barrier strips are well maded, The shell is made with flame-retardant polycarbonate,the Conductor is made with Nickel-Plated Copper which has excellent electrical conductivity and Anti-rust.

Heavy duty construction with corrosion resistant terminal plates ensures dependable, easy-access multiple termination block

It is made from strong, glass-filled polyester

These blocks are rated for 30 amps and 600 volts maximum

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x 8-32 Screws with captive star lock washer, Stud terminal: 1 x 10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

🛒Material: PC material shell, high toughness and not easy to break, transparent plastic protective cover, dust-proof and scratch-proof protection wire connector

🛒Features: Compact and not easy to fall off, the gasket at the wiring will not loosen, and it is more firm

🛒Easy installation: Comes with a Phillips screwdriver for easy installation and meets your needs

500A Bus Bar Heavy Duty Module Design Power Distribution Block：The Power Distribution Block Bus Bar Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage, Continuous Rating Voltage Max to 500A, 4 Terminal Studs 2 Screw Terminals, 300V AC / 48V DC Nickel Plated Brass made, The power distribution block is useful for customizing vehicles or relocating batteries, Applicable to car, trucks, RVs, marine, boats and other industrial equipment.

8 detachable windows & Designed to Withstand Rain and Dust: The power distribution block designed to withstand rain and dust,resist the air and seawater erosion,The power distribution block has Removable windows for unobstructed wiring, Design of 8 detachable windows and the number of windows can be disassembled according to user needs for unobstructed wiring, with the high quality insulated rear cover, Waterproof & Dustproof.

High Quality & Reliable quality: The Bus Material of Power Distribution Block Bus Bar is built from quality Nickel Plated Brass materials for durability, engineered for reliable performance that ensures the good electric conduct,The base Material: UL94-VO Rated,Glass Reinforced Thermoplastics ensures mechanical strength and durability.

Package Dimensions: 10.0" (L) x 8.0" (W) x 8.0" (H)

Product Type: Electronic Component

Package Quantity: 1

Brass metal alloy, Nickel plated Terminal insert, zinc plated, yellow chromed screws, rated UL 94V-2, temperature rating: 110 degrees C

Rated: 300 volts

Number of circuits: 12, ratings: cru

Power distribution and terminal block with six terminals for a variety of electrical routing and termination applications

Glass-filled polyester block for strength and durability, with corrosion-resistant terminal plates

Voltage and current rating of 600V and 30 amp

3.81MM phoenix type connector pcb screw terminal block connector *4pcs

About the project:These Phoenix connectors are made of advanced materials. They are well made and stable with pure copper metal block.

[Specification] Terminal spacing: 3.81mm; They are heat resistant, flame retardant and current balanced to ensure no leakage. Low signal loss and high switching frequency