Best Spicer Seals in 2026

Genuine OEM

Direct fit

Quality that you can Count on

Universal design allows tool to fit fuel tank lock rings on Ford Chrysler and GM vehicles

Tool easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit

Used with a 1/2" drive ratchet or breaker bar

Keeps Lubricants in and Contaminants Out

Optimized Compounds Perform Reliably In Extreme Operating Conditions

Superior Fluid And Temperature Compatibility

Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle.

Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime.

Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only.

【 Fit for】: Compatible with 2006 to current Ford F-250 F-350 4X4s having the vacuum-operated front axle. similar to the Ford Tool 205-830，OTC 6697.

【 Function】: Ford axle shaft seal installer ensures that the seal is installed properly and undamaged, both onto the axle shaft and into the axle housing. makes final assembly simple and quick and accurate. Prevents front hub vacuum leaks that would cause the 4WD to not engage and covers in oil to prevent corrosion.

【 Material 】:Made of high standard quality steel resisting rust and impact.Solid one piece steel construction and coated with black oxide finish ensures reliable long-term service.It is made to the original factory specifications from high-quality steel materials for a perfect secure fit.

FITMENT VEHICLE-- Fits for Dodge Ram 1500 2500 3500 4500; for Dodge Charger Dodge Challenger SXT; for 2007-2012 Hyundai Sante Fe;for Chevy Silverado Malibu Maxx Colorado Avalanche; for SAAB 9-3 03-11; for Saab 9-5 2008; Trailblazer Camaro SS for Hyundai Elantra Tuscan Sonata

FOR AUTO MODELS-- For 2005 Mercury Montego; for 2005-2006 Pontiac Bonneville & G6; for 2006 chrysler 300c; for 2011 Kia Sorento; for Jeep Wrangler TJ Jeep Compass; for Ford Explorer Ford F150 Ford Ranger; for Mercury Mariner; for Nissan Pathfinder Sentra Frontier

EASY TO USE-- Used with a 1/2" drive ratchet or breaker bar. Easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit.

GREAT COMPATIBILITY:Fits for fuel tank lock rings on Ford Chrysler GM vehicles; Works on 2004 - newer Ford F-150 trucks, 2004 - newer Chrysler / Dodge mini-vans PT Cruiser Dakota Durango, 2004 - newer Chevy 1/2-ton and 3/4-ton trucks (Please check the model whether fit for your car before purchase)

POWERFUL FUNCTION: So easy to removes and installs lock ring on the fuel tank while servicing the fuel pump or fuel sending Unit.

SUPERIOR QUALITY: Made of hardened structural steel with excellent solid and durable, resistance to corrosion and rust for years of trouble-free use.

FITMENT: Fit for Ford 2005-2019 F-250 F-350 4X4s having the vacuum-operated front axle. Similar to OTC 6697

HIGH QUALITY: Machined from heavy duty steel with excellent mechanical and physical properties, this seal installer is good in corrosion resistance and durability

APPLICATION: Installing the seal onto the axle shaft and into the wheel knuckle, this tool makes seal replacement much easier

Direct replacement for a trouble-free installation

High Quality Rubber

Manufactured for the sealing repair environment

FITMENT - Compatible with 2005 to current Ford F-250 F-350 4X4s having the vacuum operated front axle.This wheel knuckle vacuum oil seal installer tool is similar to 6697

MATERIAL - Made of high standard quality steel resisting rust and impact.

FUNCTION - Prevents front hub vacuum leaks that would cause the 4WD to not engage and covers in oil to prevent corrosion.

Precision Fitting

High Quality Seals. Fits Ford 7.5", 8.8" and some 9.75"

Compatible with Differentials: Ford 7.5", Ford 8.8" - 28 Spline, Ford 8.8" - 31 Spline, Ford 8.8" IRS Passenger Car 28 Spline, Ford 8.8" IRS SUV, Ford 8.8" Reverse Front 28 Spline, Ford 9.75" (9 3/4 inch), '97-'98, Ford 9.75" (9 3/4 inch), '99 only, Ford 9.75" IRS

APPLICATION -- Specially designed for Dana 30, 44 and 60 front differentials.

QUALITY -- Manufactured from quality steel, using top of the line machining and measuring equipment to ensure each part is manufactured to required specifications.

FUNCTION -- Helps you install side seals in the tubes of a Dana 30, Dana 44 Dana 50 or Dana 60 axle housing.

303-770 Rear Main Seal Installer – Use for installation & removal of crankshaft rear seal wear ring fit for Ford 4.5L, 6.0L & 6.4L Powerstroke Diesel Engine, Low Cab Forward, F-Super Duty 250-550, E-Series.

303-1259 Front Seal Installer – Use to install crankshaft front seal/ wear sleeve fit for Ford 6.4L Powerstroke Engines, include F-250/350/450/550;Super Duty 2008, 2009, 2010; 365-MaxxForce7. This tool is needed to prevent your seal from leaking.

Superior Quality – Constructed from high standard forged steel for strength, durability, and longevity; coated with black oxide finish for resistance to rust and corrosion. Never worry wear or damage to the tool!

This installer works on crankshaft rear oil seals that come with or without a metal wear sleeve

Designed for use on 1993-1997 Aerostar or 1993-2006 Ranger and Explorer with 4.0L V6 engine

Similar to Ford No. 303-5524

Direct replacement - this hub seal kit allows you directly repair the original seals on certain vehicle applications

Complete kit - includes everything to maintain tight seal between 4WD components

Durable construction - built for reliable longevity, free of defects in materials and workmanship

Spicer genuine OE replacement

Axle shaft seal - Dana 60

Replaced 2017426

Fitment: Perfectly fit for Ford 4.5L, 6.0L, 6.4L Powerstroke, F-250, F350, F-450, F-550, F-650, F-750, Low Cab Forward, E-Series, Excursion and VT 365-MaxxForce7

High Quality: Machined from heavy duty steel with excellent mechanical and physical properties, this Installer Tool is good in corrosion resistance and durability

Application: Used for installation and removal of Rear Crankshaft Seal & Wear Ring of Ford, it credibly prevents the seal from leaking

Spicer genuine OE replacement

Genuine Spicer axle shaft seal

Ford excursion 2005-00, f-250 1999, f-250 super duty 2002-99, f-350 super duty 2002-99

Wide Application: Fits for 2011-2021 Ford Super Duty F-250, F-350, F-450, F550, equipped with 6.7L Power Stroke Diesel and 2016-2021 Ford Super Duty F-650, F-750 equipped with 6.7L Power Stroke Diesel # Alt ST-138(If you need it, you can choose to purchase our four-piece combo kit to make it easier to install and remove the front and rear crankshafts)

High Quality: Made of high quality carbon steel for, the surface is coated with black anti-oxidation coating, which has high hardness, high strength, wear resistance, with stable performance and reliable use and longer service life.

Application: It helps to install the wear sleeve and seal of the rear crankshaft more easily without damaging the seal and leakage. Make sure that the installation depth of crankshaft oil seal is correct.

HUB SEAL INSTALLER: Orion Motor Tech's heavy duty hub seal installer tool is the ideal assistant to help you place seals, enabling you to quickly install sealing rings for axle shafts and wheel knuckles

FORD COMPATIBILITY: This wheel knuckle vacuum seal tool works perfectly for seal replacement on vacuum operated front axles, making it compatible with Ford models including 1998-2004 Ford F250, F350, F450, and F550 4x4s

EFFICIENT TOOL: Our axle hub seal installer ensures your seal installs flush with the axle to prevent front hub vacuum leaks, so your 4WD remains in optimal condition and is always able to engage

FITMENT: 6.7L Power Stroke Rear Crankshaft Seal Remover fits for 2011-2019 Ford Super Duty F-250, F-350, F-450 and F-550, 2016-2019 Ford Super Duty F-650 F-750

SUPERIOR QUALITY: Machined from heavy duty steel with excellent mechanical and physical properties, this Crankshaft Seal Remover is good in corrosion resistance and durability

APPLICATION: 303-1513 tool is needed to remove the rear crankshaft seal and prevent your seal from leaking. You must remove the ignition pulse crankshaft sensor ring before bolting up the removal plate

THIS IS BRAND NEW: DNJ® Valve Stem Seal (Viton)

FITS: 01-17 Ford, Mazda 1.5L-2.5L L4 DOHC Naturally Aspirated, Turbocharged MZR

FITMENT NOTES: Viton Premium Set, One Set Services Complete Engine

Spicer genuine OE replacement

Genuine Spicer axle shaft seal

Ford bronco 1979-78, f-150 1979-78

Spicer genuine OE replacement

Genuine Spicer axle shaft seal

Ford Aerostar 1997-90, bronco 1996-80, explorer 1996-91, f-150 1996-80, f-250 1998-80, f-350 1986-80, ranger 1997-90; Mazda b3000 1996-94, b4000 1997-94; mercury mountaineer 1997

Application : For 2011-2021 Ford Super Duty F-250, F-350, F-450 and F-550（equipped with 6.7L Power Stroke Diesel）, For Ford Super Duty F-650 F-750 2016-2021（equipped with 6.7L Power Stroke Diesel）.

Replace Part Number : 303-1514.Alternate ST-138

Function : 303-1514 is used to install the rear crankshaft seal without damaging the seal, it credibly prevents the seal from leaking.Make sure that the installation depth of crankshaft oil seal is correct.

Great Compatibility – Fits for Ford Super Duty F-250, F350, F-450, F-550 2011-2021 6.7L Diesel. Fits for Ford Super Duty F-650, F-750 2016-2021 6.7L Diesel. Also fits for Low Cab Forward, E-Series and Excursion.

Practical Function – This tool kit is used to install or remove the front and rear crankshaft wear sleeves and seals, helping you finish the installation and removal at ease without any leakage. This tool will not remove the Flywheel Adapter Plate.

Package Includes – 1 x 303-1509 & 303-1509-01 6.7L Front Crankshaft Seal Installer Tool (Alt ST-137B), 1 x 303-1514 6.7L Rear Crankshaft Seal Installer (Alt ST-138), 1 x 303-1513 6.7L Rear Crankshaft Seal Remover (Alt ST-148), 1 x 303-1510 6.7L Front Crankshaft Seal Remover (Alt ST-152).

【APPLICATION】: Fits for 2011-2019 Ford Super Duty F-250, F-350, F-450, and F-550 equipped with 6.7L Power Stroke Diesel model; 2016-2019 Ford Super Duty F-650/750 equipped with 6.7L Power Stroke Diesel model.

【MATERIAL】: Constructed from high standard forged steel for strength, durability, and longevity; coated with black oxide finish for resistance to rust and corrosion. Never worry wear or damage to the tool!

【FUNCTION】: This rear main seal remover tool can help you remove the crankshaft seal effortlessly. Perfectly remove the crank seal without any possible damage and prevent your seal from leaking.

【Fitments】 Front & Rear Seal Installer is compatible with Ford 2003 - 2010 E-Series, E-150, E-250, E-350, E-450, Excursion, F-250, F-350, F-450, F-550, F-650 / 750, Low Cab Forward and VT365-MaxxForce7 Navistar International. Fits for ford engine 6.0L Diesel Powerstroke. Please see more compatible vehicles in the product detail page.

【What You Get】 Front Crank Seal and Wear Ring Installer Set x 1. (Interchangeable part number: 303-761, ST-107, ZTSE4516, 303-1158). Rear Crankshaft Seal & Wear Ring Installer Set x 1 (Interchangeable part number: 303-770, ZTSE4515C).

【Prevent Seal Leakage】 Direct replacement is used to prevent seals from leaking, saving you time and money. Meanwhile, It is designed to eliminate lip opening on wear sleeves and install seals properly.

Crankshaft Seal for 1978-1980, 1988-1990 Ford Bronco

High quality at an affordable price

Expertly made from premium materials

Vehicle Fitment – Fits for Ford Excursion (2005), Ford F-250 Super Duty (2005-2018), Ford F-350 Super Duty (2005-2018), Ford F-450 Super Duty (2005-2018), Ford F-550 Super Duty (2005-2018)

Function - Retaining lubricants and liquids, eliminating contaminants, and sealing or separating dissimilar fluids or gases. By retaining lubricant and excluding contaminants, seals ensure longer bearing life and prevent premature failure of the bearing or other component protected.

Superior Material - Machined rubber sealing edge provides greater accuracy and consistency and a better sealing surface. Extra dust lip helps keep harmful contaminants out and protects against rust and corrosion. Latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections. Flanged design allows for easier installation and helps avoid cocking.