Best Azssmuk Set Screw Shaft Collars in 2026

Product Name :Zinc Plated Set Screw Shaft Collars;

ID:7/8"; OD:1 1/2"; Width:9/16"; Set Screw: 5/16-18×5/16;

Material : High quality Carbon Steel with Zinc Plated Coating;

✔Product Name: Zinc Plated Set Screw Shaft Collars;

✔ID: 5/16"; OD: 5/8"; Width: 5/16"; Set Screw: 10-32×1/8;

✔Material: High quality Carbon Steel with Zinc Plated Coating;

Product Name :Zinc Plated Set Screw Shaft Collars;

ID:1/2"; OD:1"; Width:7/16"; Set Screw: 1/4-20×1/4;

Material : High quality Carbon Steel with Zinc Plated Coating;

Secure fit: With a bore size of 3/4”, OD: 1-1/4", width: 9/16", the Jeremywell stainless steel shaft collars provide a secure and stable fit onto the shaft, preventing components from slipping or moving out of place without damaging the shaft.

Material: Made of 304 stainless steel providing better welding ability.

Corrosion Resistance: Stainless steel shaft collars are highly resistant to corrosion, making them ideal for use in corrosive environments.

MATERIAL- High quality Carbon Steel with Zinc Plated Coating;

ID- 5/8"; OD:1 1/8"; Width:1/2"; Set Screw: 5/16-18×1/4;

PRODUCT NAME- Zinc Plated Set Screw Shaft Collars;

Setscrew shaft collar for applications supporting low axial loads and simple positioning

Effective on shafts made of softer material than the setscrew material

Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion

Made of solid Carbon Steel with Black Oxide Coating

Bore Diameter: 5/8", Outside Diameter: 1-5/16", Height: 7/16",With 10-32 Set Screw

Package Content: 4-Pieces Double Split Clamp-On Shaft Collar with 2Pcs Set Screw.

ZINC PLATED CARBON STEEL 5/8” BORE SHAFT COLLARS SETS - High-quality, fits well, and cheap. We provide you with the perfect balance between affordability and quality. If you are searching for parts that will last you for quite some time, our set of 4 bore shaft collars are manufactured to strict standards. Made from carbon steel, each bore shaft collar provides superior strength, and with the addition of zinc plating, it becomes corrosion-proof and more durable.

SCREW STYLE BORE SHAFT COLLARS WITH 5/8” BORE SIZE - Though the bore size is the most important fit consideration, you’ll also need to consider other components to ensure a perfect fit. Each of these bore shaft collars has an outer diameter of 1-1/8 inches, a 1/2 inch width (thickness), and a 5/16-18 inch clamp screw diameter.

SUITABLE FOR AUTOMOTIVE AND INDUSTRIAL USE - These are just two of the most common applications for these bore shaft collars. Common usage includes situating components in power steering assemblies, locating components on conveyor belt systems, and more. If you are unsure if these are the parts you need, remember that round bore shaft collars’ usual usage is as locators, spacers, stops, and bearing faces.

Made of solid Carbon Steel with Black Oxide Coating

Bore Diameter: 1", Outside Diameter: 1-3/4", Height: 1/2",With 1/4-28 Set Screw

Package Content: 4-Pieces Single Split Clamp-On Shaft Collar with 4Pcs Set Screw.

Made of High quality 304 Stainless Steel, better weld ability and resistance to corrosion than the regular steel

Bore Diameter: 1/2", Outside Diameter: 1", Height: 7/16".

Suitable for gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby craft industry and many more.

✔Product Name: 1/2" 304 Stainless Steel Shaft Collar;

✔ID: 3/4"(0.75 inch/19.05mm); Outside Diameter: 1-1/4"(1.25 inch/31.75mm); Width: 9/16"(0.5625 inch/14.2875mm); Tolerance: +.0005/+.0025;

✔Material: 304 Stainless Steel; Collar Style: Clamp Outside;

These two-piece stainless steel split shaft collars have an inside diameter of 1.50 inches, an outside diameter of 2.375 inches and a thickness of 0.563 inches. This pack includes 1 split collar and its corresponding screws.

Made in the USA by Coastal Machine Works. We strive to deliver high quality and precise collars. Every collar has its edges and holes deburred and its corresponding inside diameter bore engraved on its front face for easy identification.

Made from 303 stainless steel, these shaft collars have excellent corrosion resistance and are ideal for wet environments or when corrosive chemicals are present.

Effective on hard and soft shafts

Cost effective collar design

Easily installed where major disassembly would otherwise be required

Product Name :Zinc Plated Steel Set Screw Shaft Collars

Material ：High quality Carbon Steel with Zinc Plated Coating，It has good low inertia and excellent sensitivity.

Size: 5/8“ Inch Bore Zinc Plated Steel，1-1/8" inch OD , 1/2" Inch high

Used for shaft fixing and positioning, linear slide stop and locking the rod shaft end. Clamping 8mm shaft.

Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required

High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong.

Material: Shaft Collars made of high quality Carbon Steel with Zinc Plated, corrosion resistance, durable, fine workmanship

Size: ID: 1/4"; OD: 1/2"; Width: 5/16"; Set Screw: 10-32×1/8

Function: Effective on hard shafts and soft shafts

Package includes 4 shaft collars

Corrosion resistant zinc plated carbon steel

Set screw for secure placement

Package: 4-pcs Clamping type shaft collar

Aluminum alloy material, light weight, surface oxidation treatment, corrosion resistance, strong and durable.

The shaft collar can be fixed by high-strength bolt clamping, which will not hurt the shaft.

[Practical Shaft Collar]: This is a pretty practical Shaft Lock Collar Set, it is used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off and detaches, which plays a fixed role

[Simple Usage]: It is quite simple convenient to use this Shaft Lock Collar Ring, it adopts pattern edge design, so it will much easier to rotate and screw it, also comes with wrenches for convenient usage

[Quality Reliable]: This Quick Fixing Shaft Collar is made of quality thick carbon steel material with Electroplate Ferronickel, has high hardness and strength, hard to break or damage, rustproof, durable and reliable to be used for a long life

Aluminum alloy material, light weight, surface oxidation treatment, corrosion resistance, strong and durable.

The shaft collar can be fixed by high-strength bolt clamping, which will not hurt the shaft.

Easy to disassemble and install, suitable for frequent disassembly.

✔Product Name: 1 3/16 304 Stainless Steel Shaft Collar;

✔ID: 1 3/16"(1.1875 inch/30.1625mm); Outside Diameter: 2"(50.8mm); Width: 11/16"(0.6875 inch/17.4625mm); Tolerance: +.0005/+.0025;

✔Material: 304 Stainless Steel; Collar Style: Clamp Outside;

【Material】Carbon Steel with Zinc Plated,corrosion resistance

【Advantage】Effective on hard shafts and soft shafts

【Widely Used】Used for gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby craft industry

Bore Diameter: 5/16"

Outside Diameter: 5/8"

Width: 5/16"

✔Bore Diameter: 2", Outside Diameter: 3", Height: 11/16",With 5/16-24 Set Screw；

✔This Single Split Shaft Collar is made of solid Carbon Steel with Black Oxide Coating;

✔The Single Split Shaft Collar as known as wraps around the shaft so that the clamping forces will be distributed evenly;