Best Shaft Collars in 2026

Product Name :Zinc Plated Set Screw Shaft Collars;

ID:1"; OD:1-5/8"; Width:5/8"; Set Screw: 5/16-18X5/16;

Material : High quality Carbon Steel with Zinc Plated Coating;

Product Name :Zinc Plated Set Screw Shaft Collars;

ID:7/8"; OD:1 1/2"; Width:9/16"; Set Screw: 5/16-18×5/16;

Material : High quality Carbon Steel with Zinc Plated Coating;

Product Name :Zinc Plated Set Screw Shaft Collars;

ID:1/2"; OD:1"; Width:7/16"; Set Screw: 1/4-20×1/4;

Material : High quality Carbon Steel with Zinc Plated Coating;

MATERIAL- High quality Carbon Steel with Zinc Plated Coating;

ID- 5/8"; OD:1 1/8"; Width:1/2"; Set Screw: 5/16-18×1/4;

PRODUCT NAME- Zinc Plated Set Screw Shaft Collars;

✔Product Name: Zinc Plated Set Screw Shaft Collars;

✔Bore Size: 5/8", OD:1 1/8"; Width:1/2"; Set Screw: 5/16-18×1/4;

✔Material: High quality Carbon Steel with Zinc Plated Coating;

ZINC PLATED CARBON STEEL 5/8” BORE SHAFT COLLARS SETS - High-quality, fits well, and cheap. We provide you with the perfect balance between affordability and quality. If you are searching for parts that will last you for quite some time, our set of 4 bore shaft collars are manufactured to strict standards. Made from carbon steel, each bore shaft collar provides superior strength, and with the addition of zinc plating, it becomes corrosion-proof and more durable.

SCREW STYLE BORE SHAFT COLLARS WITH 5/8” BORE SIZE - Though the bore size is the most important fit consideration, you’ll also need to consider other components to ensure a perfect fit. Each of these bore shaft collars has an outer diameter of 1-1/8 inches, a 1/2 inch width (thickness), and a 5/16-18 inch clamp screw diameter.

SUITABLE FOR AUTOMOTIVE AND INDUSTRIAL USE - These are just two of the most common applications for these bore shaft collars. Common usage includes situating components in power steering assemblies, locating components on conveyor belt systems, and more. If you are unsure if these are the parts you need, remember that round bore shaft collars’ usual usage is as locators, spacers, stops, and bearing faces.

Effective on hard and soft shafts

Cost effective collar design

Easily installed where major disassembly would otherwise be required

Made of solid Carbon Steel with Black Oxide Coating

Bore Diameter: 5/8", Outside Diameter: 1-5/16", Height: 7/16",With 10-32 Set Screw

Package Content: 4-Pieces Double Split Clamp-On Shaft Collar with 2Pcs Set Screw.

Made of solid Carbon Steel with Black Oxide Coating

Bore Diameter: 1", Outside Diameter: 1-3/4", Height: 1/2",With 1/4-28 Set Screw

Package Content: 4-Pieces Single Split Clamp-On Shaft Collar with 4Pcs Set Screw.

Made of High quality 304 Stainless Steel, better weld ability and resistance to corrosion than the regular steel

Bore Diameter: 3/8", Outside Diameter: 3/4", Height: 3/8".

Suitable for gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby craft industry and many more.

✔Product Name: Bore 5/8" Two-Piece Clamping Shaft Collar Carbon Steel;

✔ID: 5/8" (0.625 Inch/15.875mm); Outside Diameter: 1-5/16"(1.3125 Inch/ 33.3375mm); Width: 7/16"(0.4375 inch/ 11.1125mm);

✔Material: Carbon Steel; Collar Style: Clamp Outside ;

These two-piece stainless steel split shaft collars have an inside diameter of 1.50 inches, an outside diameter of 2.375 inches and a thickness of 0.563 inches. This pack includes 1 split collar and its corresponding screws.

Made in the USA by Coastal Machine Works. We strive to deliver high quality and precise collars. Every collar has its edges and holes deburred and its corresponding inside diameter bore engraved on its front face for easy identification.

Made from 303 stainless steel, these shaft collars have excellent corrosion resistance and are ideal for wet environments or when corrosive chemicals are present.

Effective on hard and soft shafts

Design fully engages the shaft without marring

360 degree clamping force

Effective on hard and soft shafts

Design fully engages the shaft without marring

360 degree clamping force

VALUE PACK SHAFT COLLAR SET - This pack includes 4 pieces of standard 3/4 inch shaft collars with socket cup-point set screws

3/4” BORE SHAFT COLLARS - The shaft collars’ borehole or internal diameter is 3/4 inch with an outer diameter of 1 1/4 inches and a width of 9/16 inch

CARBON STEEL WITH ZINC PLATED COATING - High-quality carbon steel offers superior strength, resulting in better axial and radial support. And with zinc plating, they have increased durability, weldability, and corrosion resistance

Effective on hard and soft shafts

Design fully engages the shaft without marring

360 degree clamping force

Used for shaft fixing and positioning, linear slide stop and locking the rod shaft end. Clamping 8mm shaft.

Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required

High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong.

Used for shaft fixing and positioning, linear motion stopper and fixing axis of rotation. Suitable for 1.25inch(32mm) shaft.

Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required.

High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong.

Secure fit: With a bore size of 2-1/2”, OD of 3-3/4", and width of 7/8", the Jeremywell double split shaft collars provide a secure and stable fit onto the shaft, preventing components from slipping or moving out of place without damaging the shaft.

Even Distribution of Pressure: The two-piece design of the collar allows for better distribution of pressure onto the shaft, reducing the risk of damage or deformation.

High Clamping Force: Provide a high clamping force, to ensure that components remain securely in place and reducing the risk of slipping or movement.

Package: 4-pcs Clamping type shaft collar

Aluminum alloy material, light weight, surface oxidation treatment, corrosion resistance, strong and durable.

The shaft collar can be fixed by high-strength bolt clamping, which will not hurt the shaft.

These two-piece aluminum split shaft collars have an inside diameter of 1.25 inches, an outside diameter of 2.063 inches and a thickness of 0.50 inches. This pack includes 2 split collars and their corresponding screws.

Made in the USA by Coastal Machine Works. We strive to deliver high quality and precise collars. Every collar has its edges and holes deburred and its corresponding inside diameter bore engraved on its front face for easy identification.

Made from 2024 aluminum, these shaft collars are lightweight and have good corrosion resistance

Bore Diameter: 5/16"

Outside Diameter: 5/8"

Width: 5/16"

Used for shaft fixing and positioning, linear slide stop and fixing axis of rotation. Suitable for 6mm shaft.

Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required

High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong.

Used for shaft fixing and positioning, SBR linear rail stopper, for DIY CNC Routers Lathes Machine.

Design fully engages the shaft. Easily installed

High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong.

Used for shaft fixing and positioning, Linear motion stopper and fixing the drill bit. Suitable for gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby craft industry and many more.

Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required

High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong.