Best Singer Sewing Machine Parts in 2026

1.Foot Controller Pedal with Power Cord FC-322 or XC8816021,XC8816051,XC8816071,XD0501021,XZ5100001

2,For Brother Sewing Machine:BC1000, BC2100, BC2100WT, BC2300, BC2500, BQ2450, BQ3050, BQ950, BX2925PRW, CE1100PRW, CE1125PRW, CE4000, CE4400, CE5000, CE5000PRW, CE5500, CE5500PRW, CE7070PRW, CE8080, CE8080PRW, Comfort 40E, Comfort 60E, CP6500, CP7500, CS100, CS100T, CS4000, CS5000H, CS5055PRW, CS6000, CS6000B, CS6000I, CS6000T, CS7000H, CS7205, CS770, CS8800PRW, CS9100, DS120, DS140, DZ1500F, DZ2400, DZ2750, DZ3000, DZ3400, DZ820E, ES2000, ES2000T, ES2010, ES2020

3,For Brother Sewing Machine:EX660, FS100WT, FS130QC, FS20, FS40, FS40WT, HC1850, HE240,HS1000, HS2000, HS2500, HS3000, HS9500, Innov-is 990D, Innov-is XP1 Luminaire, JS50E, LB6770, LB6770PRW, LB6800, LB6800PRW, LB6800THRD, LB6810, NQ3600D, NQ575PRW, NS2750D, NS40, NS80, NS80PRW, NV1000 Innov-ís, NV1200, NV1250D, NV1500, NV1500D, NV2500, NV2500D, NV900, NV900D Innov-ís, NV950, NV950D, NV955

he Juki Sewing Gauge For TL Series Machines is made to guide the edge of fabrics straight (set by 2 screws).

Use with Juki models: TL-2010Q, 2000QI, 98P, 98Q, & 98QE

2PCS Auxiliary Spool Pin R60033210

Guaranteed to fit Singer Sewing Machine Models:1120, 1725, 2010 (2009 Version), 2010 Superb, 2277, 2263, 2273, 2773, 2282, 2932, 3116 Simple, 3221 Simple, 3223, 3229, 3232 Simple, 3321, 3323 Talent, 3709, 3709-1, 3722, 3722-1, 3810, 3810-1, 3820, 3820-1, 3825, 3825-1, 44S, 4411, 4423, 4432, 4452, 5511, 5523, 5532 Heavy Duty, 5554, 6510, 6550, 7380, 8280, 85SCH, 9100, E99670, ET-1

Guaranteed to fit Bernina Sewing Machine Models:55, 65, 80E, 90E .Guaranteed to fit Europro Sewing Machine Models:8260L, 9105, 9106, 9125

1SET Suspended (Hanging) Edge Guide for Industrial Walking Foot Sewing Machines.

Compatible with JUKI: DNU-241 DNU-1541 DNU-1541S DSC-244 DSC-245 DSC-246 LS-341 DU-1181 LU-562 LU-563 LU-1114 LU-1508 LU-1510 LU-1560

Compatible with SINGER: 111G 111W 211G 211W

IMPORTANT: if your machine model is NOT mentioned in the detail page as a compatible machine model,please do inquire us before you buy;Please do note that even though the connections of your original foot pedal look the same as ours,there is a possibility that this foot pedal does NOT work for your machine if your machine model is NOT mentioned in this detail page;1 PCS foot pedal,Connector is a 3mm male plug and about 14mm long.The plastic base is about 7.40mm in diameter.DC 15V Max 3mA.

Compatible with/Replacement for Babylock brand: BLQK SASHIKO, BLQK2 SASHIKO, BLES8 Ovation;Compatible with/Replacement for Bernette brand: B37, B38;Compatible with/Replacement for Bernina brand: 2000DCE, 2500DCET;Compatible with/Replacement for Euro Pro brand: 9101,9105,9106,9110,9120,9125,9130,9136 ;Compatible with/Replacement for Jaguar brand: 160 ;Compatible with/Replacement for Juki brand: HZL-K65, HZL-K85 ;Compatible with/Replacement for Viking brand: H|Class 600E

Compatible with/Replacement for Singer brand:1+, 150 Futura, 1500 IZEK, 160 Experience, 160 Limited Edition, 160 Anniversary, 2009 Athena, 250 Futura, 3305, 3311, 3400, 350 Futura, 5400 Brilliance, 5400 New Style, 5500 Fashion Mate, 5625, 6160 Brilliance, 6180 Brilliance, 6199 Brilliance, 6660, 6669, 6680, 6699, 70, 7256 Fashion Mate, 7258 Stylist, 7285Q Patchwork, 7412, 7422, 7424, 7425, 7426, 7427, 7428, 7429, 7430

1SET Upper KNIFE #50143403 AND LOWER KNIFE #50145403.

50143403 Alternate Part Numbers: A4142-335-000 (A4142335000);50145403 Alternate Part Numbers: A4145-335-000 (A4145335000), A4145-335, 502010.05.95

Compatible with Bernina (Bernette) Serger Models: 003 , 004D , 006D , 007D , 008D , 009D , 1100DA , 1150MDA , 1200DA , 1200MDA , 1300DC , 1300MDC , 2000DE , 2500DCE , 700D , 800D , 800DL

NEOPRENE MOTOR DRIVE BELTS, ALL SIZES AVAILABLE FROM MB-200 TO MB-530

SUITABLE FOR MANY SEWING MACHINES SUCH AS SINGER, BROTHER, JUKI, JANOME, JONES

HIGH QUALITY, VERY STRONG WITH CORD INSIDE, DOUBLE AND SINGLE SIDED, AVAILABLE IN MANY DIFFERENT SIZES

NEOPRENE MOTOR DRIVE BELTS, ALL SIZES AVAILABLE FROM MB-200 TO MB-530

SUITABLE FOR MANY SEWING MACHINES SUCH AS SINGER, BROTHER, JUKI, JANOME, JONES

HIGH QUALITY, VERY STRONG WITH CORD INSIDE, DOUBLE AND SINGLE SIDED, AVAILABLE IN MANY DIFFERENT SIZES

143UNS For Industrial Sewing Machine Part#143Uns

Measurements: -Plug to Outlet: Approximately 75 inches -Plug to Foot Control: Approximately 52 inches

Alternate Part Numbers: 250820005, 250834002, 369434-013, 369434003, 395630-53, 416669201, 419115-002, 62159, YC482 (YC-482)1

Guaranteed to fit Singer Serger Models: 10UJ13, 14CG744, 14CG754, 14ET754, 14HD854, 14SH644, 14SH654, 14SH744, 14SH754, 14SH764, 14U234B, 14U244, 14U244B, 14U285, 14U286B, 14U32, 14U32A, 14U34(14U34B), 14U34A, 14U344, 14U344B, 14U354, 14U44, 14U444, 14U44B, 14U46B, 14U52, 14U53A, 14U454, 14U64, 14U64A, 14U65B, 14U85, 14U85B, CG754, SH644, SH654

Industrial Sewing Machine Tension Spring, Check, WILL FIT, BROTHER, JUKI + MORE

Industrial Sewing Machine Clutch Motor V-Belt.

High quality belt Oil and Heat resistant

Guaranteed to give you years of service ,Different sizes available

This is a New Variable Speed Foot Pedal W/Cord # 4164361-01 Alternate Part Numbers – 081495, 3D-168A, 416510501, 416436101S, 74998, 81495, 87532, HP31098-2, JF-1000, YC-485EC.

Please be sure and check your machines receptacle and make sure it matches the end cord view. The reason for this check is because some models were manufactured using different receptacles and/or it may have been repaired and an alternate receptacle was used that was different from the manufacturer’s original part.

Fits BABYLOCK MODELS - BLQK SASHIKO, BLQK2 SASHIKO, BLES8 Ovation. Fits BERNINA BERNETTE MODELS - 2000DCE, 2500DCET, B37, B38.Fits EUROPRO MODELS - 9101.Fits HUSQVARNA VIKING MODELS - H|Class 600E. Fits JUKI MODELS - HZL-K65, HZL-K85.

1SET(26PCS) PART SET replacement is exactly compatible with Many INDUSTRIAL SINGLE NEEDLE Sewing Machines Without automatic thread trimming, use for Medium Weight material.will not work for Pfaff,Adler,Durkopp,Necchi .

Including :#52237NBL 1PCS Bobbin Case ;#40264A 10PCS Aluminum Bobbins;#143342FG (HSH-7.94B) 1PCS Rotary Hook;#19336 1PCS Wide Hinged Foot;#12482LGW 1PCS Medium Three Row Needle Plate;#12481 1PCS Medium Feed Dog;#52394 5PCS Check Spring;#208 2PCS Feed Dog Screws;#691 2PCS Needle Plate Screws;#286 2PCS Thumb Screws.

Compatible with/Replacement for Brother brand:B705,B707,B715,B716,B735,B737,B738,B745,B755,B757,B758,B767,B781 ;Compatible with/Replacement for Consew brand:30,98,99,102,103,105,210,217,218,219,220,230,290,310,2230,7360R-1

HONEYSEW Needle Threader Hook for SINGER 2662 7422-7470

NEEDLE THREADER HOOK #77421 fits SINGER 140Q, 2639, 7422

Compatible with Juki Sewing Machine Models: HZL-25Z.

- - - please double check the connector end - - - - 3 pin 2 deep grooves

Euro Pro, Omega 415, 416, 420, 440DX, 6130, 7100, 7132, 7133, 7142 & 7500.

Baby Lock BL2160, Bernina (Bernette) Funlock 003, 004, 004D, 006, 006D, 007D, 008D, 009D & 009DCC.

What's in Package：2 x 1.5mm Hex Wrench Screwdriver; 2 x 1.6mm Hex Head Wrench Screwdriver.

These Hex Allen Key Screwdrivers are pefect for indusrtial overlock and serger machine.

A Must-Have Hex Allen Wrench Screwdriver Tool Set for changing needles in your Serger.

fit for:BROTHER :XL2600 BM2600 XL5500 XL5600 XL5700 SINGER:1408 1507 8280 2250 2259 2263 3323 2662 JUKI:HZL-60 HZL-35Z MO-644D MO735

sewing machine parts LED Blubs With 3 beads 0.5W Universal Screw on Sewing Machine Light Bulb (230V , 50HZ , 0.5W , 20MA)

QTY: 1PC

Differential Feeds

Wide Variety of Stitch Patterns (2/3/4 thread overlock)

Adjustable Stitch Length

Sewing Machine Light Bulb 0.5W E14 Screw

Fit Brother XL2600 BM2600 XL5500 XL5600 XL5700

Fit Singer 1408 1507 8280 2250 2259 2263 3323 2662, (Note 4411、4423、974、964 can't used )

TALL THROAT AREA - The height of the throat is 68mm (2.66"). Due to this height, the usability of the workspace improved infinitely.

AUTOMATIC NEEDLE THREADER - Even for the needle thread, sewing machine users may want quick threading! With the automatic needle threader, threading is a breeze!

EASY ROLL HEMMING - Thread tension that is suitable for roll hemming can be obtained only by lifting the roll hemming tension lever. Simply raise the selection lever for overlock or roll hemming and set the cutting width adjusting dial to 2.5 to 3.5 allow the sewing machine to perform roll hemming.