Best Usr Unique Style Racing Signal Light Assemblies in 2026

✅ STOP, TURN & TAIL LIGHT - This 2-piece red LED light set is designed for multi-function use as a brake or stop light, turn signal and tail light. Mount to the back of small & large trailers, boat & jet ski trailers, ATV & dirt bike trailers and anything else you need to tow. Or mount directly to the exterior of your truck, Jeep or RV!

✅ BRIGHT & HIGHLY VISIBLE - 10 bright LED diodes brilliantly illuminate and cut through darkness & low-visibility conditions to light up the rear of your vehicle or trailer. Stay safe on the road knowing other drivers can easily see your lights at night and in foggy or stormy weather.

✅ EASY INSTALLATION - Each light comes with an industry standard 3-prong plug with attached 12" wiring. Wiring is pre-sliced for quick installation. Included black rubber grommet makes for an extra easy surface mount setup - no holes or screws required. Dimensions with grommet are approximately 7.5” x 3.25” x 2”.

Package includes 30 pieces 3.8" Inch Led Trailer Lights 6LED (10Pcs Amber + 10Pcs Red + 10Pcs White); free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, brake lights or backup lights, they can, but they may be not that bright;

Package includes 20 pieces 3.8" Inch Led Trailer Marker Lights 6LED Amber Lens; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;

Partsam (2 x Amber & 2 x Red) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber/Red, Reflex Lens

12 Volt; Flush Mount; 4LED; Kit includes grommets and pigtails for complete installation; Sonically sealed, waterproof housing and lens unit is submersible

Round trailer light serves as either a side marker light or a clearance light; LEDs make great replacements for incandescent lights;

Package includes 10 pieces 3.8 Inch Amber Led Trailer Marker Lights 6LED; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;

Partsam (10 x Amber) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber Lens, Reflex Lens

12 Volt; Flush Mount; 4LED; Kit includes grommets and pigtails for complete installation; Sonically sealed, waterproof housing and lens unit is submersible

Round trailer light serves as either a side marker light or a clearance light; LEDs make great replacements for incandescent lights;

3 functions: brake, tail, and turn

Power draw at 12.8 volts: Stop/turn signal light: 2.59 amps Tail light: 0.59 amps

Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" deep

Brand : LedVillage come with 1 year warranty

Package Included: Clear/Amber 3/4" Round Miniature side marker 12v DC with Grommets

Brightness : 150 lumen each light with 1 pcs High Quality Super Flux Led

3 functions: brake, tail, and turn

Power draw at 12.8 volts: Stop/turn signal light: 0.234 amps Tail light: 0.033 amps

Dimensions: 4-5/16" diameter x 1-13/16" deep

DOT COMPLIANT - Our 3/4" clearance lights are DOT FMVSS-108 compliant and meet the requirements for build quality, durability, and visibility. So you can feel confident that you're installing a light that is completely safe, compliant and legal.

BETTER VISIBILITY - These lights are SAE P2 PC rated and produce a 180-degree visible arc of light. When installed on the 45-degree corner of a truck or trailer, they function as both a clearance and side marker light; two for the price of one!

MORE FUNCTIONS - Equipped with two brightness levels, these three-wire LED lights give you more options. Install them on the front or rear of your vehicle as side marker lights, clearance lights, auxiliary turn signals or supplemental brake lights.

3 functions: brake, tail, and turn

Power draw at 12.8 volts:Stop/turn signal light: 0.360 amps Tail light: 0.030 amps

Dimensions: 4-5/16" diameter x 1-15/16" deep

Thinline LED Trailer Tail Light

Stop, Tail, Turn - Submersible

15 Diodes

3 functions: brake, tail, and turn

Power draw at 12.8 volts: Stop/turn signal light: 2.4 amps Tail light: 0.50 amps

Dimensions: 6-1/2" Long x 2-1/4" Tall x 2 3/8" Thick