Best Uctronics Single Board Computers in 2026

UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE

Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W

Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports

For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included). Note: It's not recommend to use RJ45 with aluminum foil shielding to connect the PoE Hat to the PoE switch.

Update: This lastest UC-858 mini PoE HAT Compatible with 48V non-standard switches so it can supports more brands of switches.

Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant

Video-Audio Joy: 480 x 320 display resolution (HDMI input resolution supports 480*320 to 1920*1280 any resolution); 3.5mm audio/headphone jack makes the display no longer silent.

Perfect for Raspberry Pi 4: Micro HDMI adapter included, hassle-free connection to Raspberry Pi 4; Also compatible with all other Model A&B series.

Efficient heat dissipation: This screen is mounted with a brushless quiet fan and powerful heat dissipation, you don't need to worry about the overheating problems and the noise.

For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included).

Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant

Efficient Heat Dissipation: the 25mm×25mm brushless silent cooling fan will provide faster and more efficient cooling for your Raspberry Pi.

Orange Pi 5 16GB uses Rockchip RK3588S new generation 8-core 64-bit processor, quad-core A76+quad-core A55, with 8nm process design, up to 2.4GHz main frequency, integrated ARM Mali-G610 GPU, embedded high-performance 3D/2D image acceleration module, built-in NPU with 6Tops computing power, with 16GB (LPDDR4/4x), and up to 8K display processing capability.

Orange Pi 5 16GB Single Board Computer provides abundant interfaces, including HDMI output, GPIO interface, M.2 PCIe2.0, Type-C, Gigabit LAN port, 2*USB2.0, 1*USB3.0, etc.

Orange Pi 5 microcontroller open source board mini computer can be widely used in tablets, edge computing, artificial intelligence, cloud computing, AR/VR, intelligent security, smart home and other fields, covering AIoT various industries.

The ultimate starter kit is especially designed for Arduino MEGA2560. With this kit, you can learn how to program with Arduino IDE to develop many interesting projects. You don’t need to solder the pins by yourself, just connect the circuit by dupont cables to breadboard

The kit includes 59 kinds of the electronical components, 153pcs totally, support basic and advanced projects, you can also build some smart home systems with this kit

With tutorial paper book in the package. The tutorial book of 33 lessons includes introduction of components, code library, schematic, dedicate wiring diagram, detailed steps of operation and experimental result. This paper book makes your wiring much easy

Why is the kit a must-have? This kit is designed to be used alongside the free Official book, It includes every component you need to get started with the book and you won’t have to run out to the store for anything extra.

Application: A high cost performance kit gets you started in learning the robotics, programming and electronics easily; The decent package helps it become a smart choice of a present.

More Expansion: With the tiny, fast, and versatile board built with RP2040, you can also connect to motors, IMU or other components based on a special driver (not included), finish getting started with C/C++ tutorial, and integrate it into end products.

High Performance: Amlogic A311D - x4 2.2Ghz Cortex A73, x2 1.8Ghz Cortex A53 12nm SoC fabrication process for low heat 2T2R AC Wi-Fi with RSDB Features Bluetooth 5.0 USB 3.0 Available Gigabit Ethernet with WOL support LPDDR4/X USB-C PD for heavy applications

Neural Network Accelerator: NPU: Supports a maximum frequency of 800MHz at 5.0 TOPS INT8 inference up to 1536 MAC Internal L2 cache (512KB) and system workspace buffer (1MB) Supports all major deep learning frameworks including TensorFlow and Caffe

Maker Friendly: Stackable Design Programmable MCU 3 Programmable LEDs (Blue, Red and White) XPWR for external Power button Onboard SPI Flash Khadas TST Khadas KBI

This is a multi-purpose semi-enclosed enclosure kit, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ / Pi 4 Module B / Pi Zero / Pi Zero W, Arduino Uno R2 / Uno R3 / Mega 2560 R2 / Mega 2560 R3 / MKR Series etc, and BeagleBone / BeagleBone Black / BeagleBone AI / BeagleBone Black Wireless / BeagleBone Green / BeagleBone Green Wireless or SanCloud BeagleBone Enhanced.

It can be assembled very flexibly as a semi-closed enclosure, or as a two-layer bracket, or if you buy multiple sets, it can be used as a Raspberry Pi cluster case.

The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Arduino stack SHIELD module, or Beaglebone stack CAP module. Compared with other enclosures, the project is more practical and flexible.

【Improvement】 Upgraded from our previous UCTRONICS for Raspberry Pi cluster case U6243（ASIN:B09JNHKL2N）. Now you can power your fans while using PoE HAT. Compatible with Raspberry Pi official PoE+ HAT and UCTRONICS mini PoE HAT(ASIN:B082ZLDMZ6). Also We replaced the thumbscrews with captive loose-off screws on the mounting brackets, which greatly improves the stability of the brackets. The front and back panel openings are expanded to support more models of switches.

【Wide compatibility】 Designed to house 4×Raspberry Pi 4B, 3B+/3B, or other B models, 4×2.5” SSDs and Ethernet switch in a cluster case. You can use it as a complete desktop NAS. It also has holes reserved for the SD card extension adapter (ASIN: B09CKRDFTH) which allows you to access the SD card from the front of the case. Please note that the thickness of a 2.5" SSD cannot exceed 7mm.

【Front Removable】 Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance.

A DIN option to provide a wide range of flexibility in mounting for multiple SBC devices, such as Raspberry Pi 4, 3 B/B+ and all other A, B and Zero Models, Raspberry Pi Pico, Arduino Uno/Mega 2560, BeagleBone series.

The mounting bracket is made of 1.2mm carbon steel, attaches to both the SBC and the DIN rail sturdily, multiple optional mounting holes help you mount the different boards and the DIN rail clips in both horizontal and vertical way.

Recommended for creating an array of Raspberry servers, home lab and other industrial projects, make it very professional and easy to maintain when needed.

For All Raspberry Pi B Models: The metal enclosure is designed for Raspberry Pi and is compatible with Raspberry Pi 4B+/3B/3B+/2B/B+; Supporting up to 4 2.5" SSDs (7mm thickness) and 4 Pi installations; it allows you to add additional storage to your Pi whenever and wherever you want, making it easy to build Pi clusters and Pi NAS servers. Please note that the thickness of a 2.5" SSD cannot exceed 7mm.

Side Opening Design: you can easily position the Pi HDMI, audio, and power supply. Each layer is 40mm/4.57inch high, there is enough space for you to install 4 mini PoE hats and official PoE+hat.

Made of metal aluminum, Size: 4.13*4.84*7.12inch; the case is strong and durable, compact and lightweight. So you can easily place it anywhere on your desk. An SD card slot is reserved in the mounting bracket, which can be accessed from the front of the case using an SD card adapter (Asin: B09CKRDFTH). 4 additional screw holes on the top of the enclosure for stacking.

No Wireless Module and 3.5mm Audio Port

High performance Quad-core ARM SoC up to 1. 8GHz with 2GB RAM- The Tinker Board S features the Rockchip RK3288 SoC and Mali-T764 GPU along with 2GB of Dual Channel DDR3 memory and 16GB of fast & durable eMMC onboard storage

DIY Design – Tinker Board S features multiple DIY use features including a color coded enhanced GPIO header with dual mode I2S, silkscreened PCB, onboard power on pin

For the Complete Raspberry Pi Ultimate Rackmount, ASIN B09BJPMSZS, specifically designed to cover the slots completely where have no pis mounted on the 1U rack, make your rack neater artistic.

Fixed with two included thumbscrews, which are made of quality metal material, and the grip knob thumb screw adopts a screw-in design, which helps you install and replace quickly and easily, no tools needed!

The covers are built with the nice and sturdy gauge of 1.2mm carbon steel, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth).