Best Toejamr Snowboarding Stomp Pads in 2026

Molded spike pattern for maximum traction, Sections can be cut apart and reconfigured

Peel and stick adhesive

100% TPU

LIGHT WEIGHT, HiGH IMPACT, THERMOPLASTIC, SNOWBOARD STOMP PAD - Molded 7mm spikes provide great grip for boots, with a smooth finish that won't abrade or tear clothing or gloves when carrying your board.

CATS ALWAYS STOMP THEIR LANDINGS! - This little guy might help you channel your inner flying feline, and get those feet back under you no matter how tweaked you get.

6" x 4" [ 15cm x 10cm ] SIZE - Too cute to step on? Don't worry, you won't hurt him.

Molded urethane, Three configurable pieces

Snow scraper bar, Peel and stick adhesive

100% TPU

Plated aluminum, Nine per pack

Peel and stick adhesive

100% Zinc Alloy

Two-piece stomp mat for custom placement

Four-point stars provide additional grip

Dakine Friendly Foam biodegradable EVA foam, Light weight molded EVA surf traction

Can be trimmed to customize as needed, Peel and stick adhesive

100% EVA

Made in China

Product Type :OUTDOOR RECREATION PRODUCT

Package Dimension :0.889 cm x 14.401 cm x 28.092 cm

Molded urethane

Peel and stick adhesive

Unique Design: Transparent snowflake pattern adds more fun to your snowboarding trips.

Maximum Traction: Special 3D bumps on the stomp pad provide maximum grip and traction.

Easy to Install: Peel & stick 3M adhesive backing for easy application.

Clear stomp pad doesn't cover up graphics

Raised ridge in center for traction and scraping snow from boot sole

All weather adhesive keeps the pad in place

[Brand] VEROMAN

[Size] 3.95 x 3.95 inch

[Material] Acrylic

LONG LASTING ULTRA LIGHT EVA FOAM

LARGE 7x5" STOMP PAD

EASY TO INSTAL WITH PEEL AND STICK ADHESIVE

Clear aluminum Spike stomp pad has a transparent traction mat so the graphics of your snowboard won’t be covered. It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.

MODULAR AND CONFIGURABLE MAT STOMP:10pcs aluminum spikes on stomp pad Provides Extra Grip and perfect Traction, easily cut 2pcs configurable pieces and moved to perfect traction, where you need it.

QUICK & EASY APPLICATION:3M Peel,stick adhesives and a adhesion promoter that for Using to increase the bond strength of snowboard surface.

9 Pack, .5" each

Snowboard Aluminum Snowboard Stomp Pad Surface treatment:anodic oxidation.It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.

MAXIMUM TRACTION:The molded spike design creates extra grip for maximum traction when out on the slopes.

Size:DIA 7.87inch(20mm) 4 Layer-Cone Studs,The size of this spike big enough to provide enough grid and yet it could still fit nicely on the board.

4 of our 3.5" x 3" Genuine ToeJamR Stomp Pads

Made of Long Lasting Ulta-Light Closed Cell Foam

Many ToeJamR Designs to customize your board.

🏂 IMPROVE BOARD CONTROL: The high friction, anti-slip & waterproof pad enhances your control over your board when your back foot is out of the binding. The high quality acrylic material allows your boots to sustain its much needed grip.

💧 ANTI-SLIP & DURABLE: The Frozen Lines snowboard stomp pad is made of an Anti-Slip acrylic material ensuring a fantastic snowboarding experience. The material ensures the stomp pad is long lasting and survives the toughest winter conditions.

💨 QUICK & EASY APPLICATION: The quick and easy peel adhesive layer allows a simple application and ensures you hit the slopes in no time.

traction with your snowboard.

Peel and Stick Using 3M Adhesive Backing

They adapt to any sporting activity.

Heavy duty

Abundant Quantity in the Package: you will receive 40 pieces of spike stomp pads, suitable for most snowboards, sufficient to meet your daily use or replacement demands

Reliable and Serviceable: our snowboard stomps are made of quality rubber material, non slip and wear resistant, hard to break, and can provide extra traction and scrape snow from boot bottoms; It also works in cold and inclement weather, helping you stay in good shape on the slopes

Self Adhesive Design: these black stomp pad are designed with self adhesive backs, and you just need to peel off the backing and stick them on where you want, convenient for you to use; Please remove the dirt from the snowboard before installation, dry it with a towel, and paste it to the snowboard, and you can put some heavy objects on it and keep it indoors for a period of time to ensure the adhesion is firm

Anti-Slip: The snowboard stomp pad is made of Anti-Slip silicone material which is long lasting and could survive the toughest winter conditions to ensure a fantastic snowboarding experience.

3m Adhesive: Using The 3m Adhesive which is super sticky, durable and would not fall off easily. Also very easy to apply and peel off without leaving any trace. Please make sure your snowboard surface is smooth and clean before apply.

Improve Board Control: The high friction, anti-slip & waterproof pads enhance your control over your board when your back foot is out of the binding. The high quality silicone material allows your boots to sustain its much needed grip.

LIGHT WEIGHT, HiGH IMPACT, THERMOPLASTIC, SNOWBOARD STOMP PAD - Molded 7mm spikes provide great grip for boots, with a smooth finish that won't abrade or tear clothing or gloves when carrying your board.

DA DUM… DA DUM… DA DUM DA DUM DA DUM SHRED STOMP 6" x 6" [15cm x 15cm ] - If you saw this movie when you were a kid, you didn't even want to get in a swimming pool you were so scared. Also, you are really old now.

EASY TO APPLY - We only use the best Pressure Sensitive Adhesive, so your stomp will stay stuck down on any type of smooth or textured top sheet.

Package include:you will get 2 sets of different snowboard stomp pads, suitable for your winter snowboarding.Enough for your daily use and replacement.Improve your outdoor snowboarding safety.

3D design:The clear Anti-Slip stomp pad features a 3D raised design,Increase friction, effectively improve skid resistance, provide maximum grip and traction.Transparent design that won't obscure the pattern of your snowboard.

Safe material:Made of high quality PVC material,strong and durable, not easy to fracture and deformation,can effectively scrape the snow on your sole. Add more fun to your snowboarding trip.

Dakine Friendly Foam biodegradable EVA foam, Customizable 4 piece light weight molded EVA surf traction

Can be trimmed as needed, Peel and stick adhesive

100% EVA

Anti Slip Performance: our snowboard stomp pad stud is made of quality PVC material, hard and firm. Raised cleats provide extra traction for the ski foot pad, helping you scrape snow off the sole and keep it slip resistant

Split Design: each snowboard mats can be divided into 3 independent stomp pad, which can be more flexibly applied to meet the needs of more sizes. You can adjust the pasting distance according to the size of your feet. the snowboard grip pad can not only increase friction to provide extra traction of your snowboard, bringing you a nice ski experience

Self Adhesive Design: these stomp pad are designed with self adhesive backs, and you just need to peel off the backing and stick them on where you want, convenient for you to use; Please remove the dirt from the snowboard before installation, dry it with a towel, and paste it to the snowboard, and you can put some heavy objects on it and keep it indoors for a period of time to ensure the adhesion is firm

Snowboard Aluminum Snowboard Stomp Pad Surface treatment:anodic oxidation.It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.

Sufficient Quantity: you will receive 9 pieces of snowboard stomp pads, they are suitable for most snowboards, sufficient quantities to meet your daily use and replacement demands, you can also share them with others

Easy to Use: the spike stomp pad is designed with a self adhesive back, you just need to peel the backing and paste it on where you want, convenient for you to use; Please remove the dirt on the snowboard and dry it before installation, and you can put some heavy objects on it and keep it indoors for a period of time to ensure the adhesion is firm

Grab or a stomp? You decide, Dakine Friendly Foam biodegradable EVA foam, Customizable light weight molded EVA surf traction, Can be trimmed as needed

Peel and stick adhesive, 2 per pack

100% EVA

UNIQUE PATTERN - The stomp pad has been designed to a snowflake shape with the Christams tree pattern on it, making your snowboard more special. And it is transparent so that you never worry about covering the graphics on the snowboard.

3D BUMPS DESIGN - 3D bumps on the stomp pad work excellently in giving a better grip and maximum traction. You can also remove the ice and snow from the pad easily. Just enjoy the snowboarding trip to your heart's content!

STRONG ADHESION - The snowboard stomp pad is super adhesive and really not slippery, featuring a durable and safe using.

5″ x 3.75″ x 0.5"

Peel and Stick

VHB Tape Backing

6 quarter-sized all-metal RaceWax 4-Point Ninja Studs Stomp Pad in Purple

The size of a US quarter: Each plated aluminum stud measures approximately 25 mm x 25 mm x 7 mm high.

Provides grip for your foot in the lift area.