Best Neiko Step Drill Bits in 2026

Material: Titanium Combination Drill taps are made of HSS 4341, High hardness, rustproof, solid and durable; Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.

Easy Use: Fast replacement composite cone, uses drill edged principle. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.

Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.Shank:1/4 inch (6.35mm) hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines.

[What You Will Have] Set of 6 metric tap drill bit set M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately

[Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency

[Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you

【Step Drills and Cone Drill】3 piece 5/9/14 step drills (4-12/20/32mm) and 1 piece cone drill (8-20mm). Laser marking of step size provide convenient and accurate drilling

【Countersink Drill Bits】6 piece countersink drill bits: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm - 90° point, three cutting edges, ideal for deep countersinking

【High Quality】All drills are HSS Titanium coated, come with 1/4" (6.35mm) hex shank, and are precision ground, heat treatment, and hardened for consistently accurate drilling or enlarging holes into sheet & non-ferrous metals, wood and plastics

🔧【Material】 HSS 4241 & classic high speed steel with titanium coating for strength and longevity.

😀【Package】 3-Piece HSS Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ) + 1 Automatic Center Punch.

🔧【Easy Drilling】 Two-fluted design provides faster, smoother cutting, provided with small pressure and the sets. Stepped grooves prevent slippage in the chuck.

[Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency

[Material] HSS4341 (high-speed steel) + titanium coating. High speed steel is designed to ensure sharp, fast execution and withholds strength and efficiency. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you

[Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Convenient ¼” hex shank features a tapered end to prevent over-tapping and includes a quick-change adapter for easy size change

28 SIZE IN 3: For using step bits for metal, stepped drill bit, sheet metal drill bit, step down bit, stepper drill bit, stepping drill bit

Work as tapered drill bit, step up bit, step drill bit, step bit, step drill bits for metal, step drill, step drill bit set, step drill bits

Use as step bits, step drill bit set 5, drill bit step, 2 inch step drill bit, step bit drill bit, step drill set, drill step bit

【Widely Used】Perfect Step Drill Bits suitable for drill holes in various material： within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.

【Material】HSS combined with a titanium coating. More capable and durable.

【Hexagonal Design 】: Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. It is better clamped on the pistol drill to prevent slippage and shedding during the rotation.

Shape: 7pcs 1/4 inch Shank Titanium Combination Drill and Tap Set, Metric M3*0.5mm (2pcs), M4*0.7mm, M5*0.8mm, M6*1.0mm, M8*1.25mm, M10*1.5mm, It is not easy to shake and can drill accurately.

Multi-purpose: These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, wood, plastic, iron, and so on, They’re sharp, and easy to use. Fit Electric hand drill, impact drill, bench drill and tap machines.

Easy to Use: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.

【Widely Used】Perfect Step Drill Bits suitable for drill holes in various material： within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.

【Material】HSS combined with a titanium coating. More capable and durable.

【Easy Drilling】Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake

[Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you

[What You Will Have] Set of 6 drill tap bits in metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately

[Easy to Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency

【3-IN-1 MULTIFUNCTIONAL COMBINATION DRILL TAP】 They are three-in-one operation, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic. One-step processing, greatly save processing steps and time costs, improve working efficiency. Deepening the chip flute helps to remove chips and debris on the tap, reducing friction and heat, thereby achieving a faster and cooler drilling process.

【PREMIUM MATERIAL】These high-quality taps are made of high-speed steel(HSS) and have high hardness to achieve sharpness, fast execution and maintain strength and efficiency. It can be applied to all wood, copper, iron and part of thin stainless steel is also applicable. The surface is treated with titanium alloy to improve the cutting performance and wear resistance of the drill , and extending the service life.

【 HIGH VERSATILITY&CONVENIENCE】The product portfolio includes SAE and metric sizes, can meet your various need. Each tap drill is engraved with its size, you can choose the accurate bit without any difficulty.The convenient 1/4" (6.35mm) hex shank has a tapered end to prevent excesssive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread. It also comes with a portable storage case you can carry and keep the drill neat and tidy.

【Widely Used】Perfect Step Drill Bits suitable for drill holes in various material： within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.

【Material】HSS combined with a titanium coating. More capable and durable.

【Easy Drilling】Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake

29 Pack Woodworking Chamfer Drilling Tool Kit with a Handy Plastic Case– A Versatile tool set that would make a nice gift for woodworker, Dad, DIY lover, home hobbyist. Ideal for wood, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill.

3 Pcs 1/4" Metric Hex Shank HSS Step Drill Bit Set – With titanium coating, it has great heat/ corrosion/ rust resistance. Specification: 3/16''-1/2'', 1/4''-3/4'', 1/8''-1/2''. Suitable for drilling holes within 0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 0.2 inch (Wood, PVC sheet, Insulation Boards). Not recommend for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.

7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth.

Cool Christmas Gifts for Dad:Are you searching for a suitable woodworking gift for dad? This Multi function drill tool kits can solve this problem, which Including countersink drill bits, L-wrench, wood plug cutter, step drill bit, center punch

5 Pack HSS Titanium Coating Step Drill Bits: 3/16-1/2'', 1/8-1/2'', 1/4-3/4'', 3/16-7/8'', 1/4-1-3/8'', suitable for sheet metal, wood board, plastic, aluminum alloy, copper, NOT recommended for high carbon steel, hard metal.

7 Pack Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth.

{Good Quality Metarial} Made of HSS 4242,high hardness,strength and longevity.

{Design}Shank Type:Triangle shank; Type:Spiral groove.

{Size}Shank diameter: 10mm(0.39'') for 4-32; 8mm(0.31'') for 4-20; 6mm(1/4'') for 4-12;Hole Cutter step included: 4-12/20/32mm.

The drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness. Our drill bit is bigger in size so it can drill holes with larger dimensions.ture

cutting blade design makes for cutting faster,automatic deburring from hole when drilling.

Ideal For DIY, Home and General Building/Engineering Using.

Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Combination Drill and Tap Bit: Thread Size: M8 x 1.25; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Combination Drill and Tap Bit: Thread Size: M5 x 0.8; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Combination Drill and Tap Bit: Thread Size: M5 x 0.8; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Combination Drill and Tap Bit: Thread Size: M10 x 1.5; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

SPLITTING WOOD CONE DRILL-- Efficient tools for logging, the wood splitting cone drill bit can effectively help you improve productivity. Making the work feel comfortable, improving work efficiency and practicality.

WOOD BREAKER BIT-- Splitting Wood Cone Drill Bit Heavy Duty Drill Screw Cone Driver

LOG BREAKER REAMER-- YOUR IS OUR 1ST PRIORITY- Please be free to contact US if you have any questions, we will provide Top-Rated Customer Service

Combination Drill and Tap Bit: Thread Size: M5 x 0.8; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, stainless steel, cast iron, cast steel, hardened steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.