Best Philtop Storage in 2026

Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.

MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.

FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.

FLOOR MOUNTED & COMPATIBILITY: Takes up to 5" Tire Width - Floor-mounted type, much more stable! Mounting bolts are included for your convenience. The stand is only compatible with 29“and 27.5” bikes. NOT FOR 20” and 24” kid’s bikes " and 26" wheels MTBs. beach cruisers and 700C road bikes

Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for parking a bike into it

MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.

This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.

Fully Adjustable: 2 pulleys design with adjustable position. Fits any bikes with wheel size from 24" to 29". Just a simple "slide in" and that's it! Including those fat bike with 4.0" tires.

Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.

This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.

2 pulleys design with adjustable position. Fits any bikes with wheel size from 24" to 29". Just a simple "slide in" and that's it! ( Max tyre width: 2.4 inch ≈ 60 mm )

Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.

This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.

2 pulleys design with adjustable position. Fits any bikes with wheel size ranging from 24" to 29". Just a simple ‘slide in’ and that's it! ( Max tyre width: 2.4 inch ≈ 60 mm )

Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.

This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.

2 pulleys design with adjustable position. Fits any bikes with wheel size ranging from 24" to 29". Just a simple ‘slide in’ and that's it! ( Max tyre width: 2.4 inch ≈ 60 mm )

Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.

LIMITATIONS: Please check the size before buy. This is great for 29" and 700c Bikes. Too TALL for 27.5" & 26" bikes.

SOLID & STABLE: Solid one piece steel construction bike hub mount type. With its 5 lbs weight and the 11 inch wide base, this solid stand can hold the bike at ease. Just place the rear hub axle into the holder. Fast and simple bike parking solution.

COMPATIBILITY: FIT 29" and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 26" or 27.5" bikes, please look at the other model with lower or adjustable holding arm. (YC-109L or YC-109AF)

SOLID & STABLE: Solid one piece steel construction bike hub mount type. With its 5 lbs weight and the 11 inch wide base, this solid stand can hold the bike at ease.

EASY TO USE:Just place the rear hub axle into the holder. Fast and simple bike parking solution.

COMPATIBILITY: FIT 26”, 27.5” and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 29" bikes, please look at the other model with higher or adjustable holding arm. (YC-109H or YC-109AF)

SOLID & STABLE: Solid one piece steel construction bike hub mount type. With its 5 lbs weight and the 11 inch wide base, this solid stand can hold the bike at ease.

EASY TO USE:Just place the rear hub axle into the holder. Fast and simple bike parking solution.

COMPATIBILITY: FIT 26”, 27.5” and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 29" bikes, please look at the other model with higher or adjustable holding arm. (YC-109H or YC-109AF)

SOLID & STABLE: Solid one piece steel bike hub mount type. Hub mount type is approved one of the most stable bike rack.

COMPATIBILITY: Adjustable height to fit 26”, 27.5” , 29" and 700c bikes: Please note: there is some limitations to use the rack. It is best to be used with non-disc brake bikes as long as there is a gap between hub, spokes, disc brake rotor and frame.

RUBBER COATING: The holding arm are rubber coated to protect the frame and hubs. Rubber sleeve may wear and tear after a while. Do NOT worry, we have the sleeves for replacement.

LIMITATIONS: Please check the size before buy. This is great for 29" and 700c Bikes. Too TALL for 27.5" & 26" bikes.

SOLID & STABLE: Solid one piece steel bike hub mount type. With 5 lbs weight and 11 inch wide base, this solid stand can hold the bike at ease.

COMPATIBILITY: FIT 29" and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 26" or 27.5" bikes, please look at the other model with lower or adjustable holding arm. (YC-109L or YC-109AF)

SOLID & STABLE: Solid steel bike hub mount type. Hub mount type is approved one of the most stable bike rack.

COMPATIBILITY: Adjustable height to fit 24",26”, 27.5” , 29" and 700c bikes. It is best to be used with both disc brake and non-disc brake bikes as long as there is a gap between hub, spokes, disc brake rotor and frame.

FOLDABLE & PORTABLE - A simple pull-knob will allow to fold the stand into a flat shape within seconds, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore. Weight: 1900g (4.18 lbs).

SOLID & STABLE: Solid steel bike hub mount type. Hub mount type is approved one of the most stable bike rack.

COMPATIBILITY: Adjustable height to fit 24",26”, 27.5” , 29" and 700c bikes. It is best to be used with both disc brake and non-disc brake bikes as long as there is a gap between hub, spokes, disc brake rotor and frame.

FOLDABLE & PORTABLE - A simple pull-knob will allow to fold the stand into a flat shape within seconds, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore. Weight: 1900g (4.18 lbs).

FREE UP SPACE: Looking for a solution to organize your garage to save floor space? This is the one you've been looking for. This wall mount rack is great for use in a garage or apartment with limited space. Get organized by hanging the bike on the wall to free up some valuable space so there can be more room to store other items.

HIGH-QUALITY HEAVY DUTY RACK: Made of premium powder-coated steel with anti-rust design. Anti-scratch coating and rubber padded on the pedal hook better protect your wall from dirt or damage. This set of wall hangers is designed to fit most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, Hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles. Each hook can hold up to 20kg/45lbs (each bike).

NO TUNING HANDLEBAR: The wheels are sitting again the wall. So no more turning handlebar or wheels which could be accidentally knocked. The easy-to-take design also makes it simple to take out or hang up your bikes and lets you hang or detach your bikes in a second. No more mess!

FREE UP SPACE: Looking for a solution to organize your garage to save floor space? This is the one you've been looking for. This wall mount rack is great for use in a garage or apartment with limited space. Get organized by hanging the bike on the wall to free up some valuable space so there can be more room to store other items.

HIGH-QUALITY HEAVY DUTY RACK: Made of premium powder-coated steel with anti-rust design. Anti-scratch coating and rubber padded on the pedal hook better protect your wall from dirt or damage. This set of wall hangers is designed to fit most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, Hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles. Each hook can hold up to 20kg/45lbs (each bike).

NO TUNING HANDLEBAR: The wheels are sitting again the wall. So no more turning handlebar or wheels which could be accidentally knocked. The easy-to-take design also makes it simple to take out or hang up your bikes and lets you hang or detach your bikes in a second. No more mess!

STABLE: Very stable tripod aluminum alloy bike floor stand. The 3 legs design with 3 unique rubber holders ensures the stand is very stable even on uneven ground.This free-standing floor stand is great when you still need the flexibility to move your bike around.

QUICK RELEASE ADJUSTMENT: The height is fully adjustable by quick release handle. The height adjustment rage is from 49" to 87.8". Quickly clasped stand for easy carry. 90% Assembled And Just Needs To Install The Hook Claw Bracket.

TILTING CRADLES: The adjustable bike holders/cradles tilt to hold bikes with sloping top tubes or aggressive frame geometries. Material: Powder-coated heavy duty steel, sturdy and stable constructed. Padded cradles prevent scratching frame painting.

FREE UP SPACE: Looking for a solution to organize your garage to save floor space? This is the one you've been looking for. This wall mount rack is great for use in a garage or apartment with limited space. Get organized by hanging the bike on the wall to free up some valuable space so there can be more room to store other items.

HIGH-QUALITY HEAVY DUTY RACK: Made of premium powder-coated steel with anti-rust design. Anti-scratch coating and rubber padded on the pedal hook better protect your wall from dirt or damage. This set of wall hangers is designed to fit most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, Hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles. Each hook can hold up to 20kg/45lbs (each bike).

NO TUNING HANDLEBAR: The wheels are sitting again the wall. So no more turning handlebar or wheels which could be accidentally knocked. The easy-to-take design also makes it simple to take out or hang up your bikes and lets you hang or detach your bikes in a second. No more mess!

STYLISH ALLOY: The hanger is made of aluminium alloy with STAINLESS STEEL bolts and coated by shinning painting, which lasts for a long time and looks gorgeous when a bike hanged on it. Outdoor available.

LARGE TIRE& WHEEL COMPATIBLE: The inside gap between wall and hanger is so big. Max rim depth: 50mm. Mounting flange has 2 holes, allowing use of bolts or lag bolts to mount. You can switch the hanger if you want the bike to hang on the left or right of it.

EASY HANGING: The hanger bar shape is a straight bar with a groove in the middle, compared with traditional hook. Very easy to hang your bike on it. Also the EVA coated hanger is so thick, it protects the rim better, such as carbon rims. Disadvantage: There is no holder or plate , so the front tire may leave marks on the wall.

STYLISH ALLOY: The hanger is made of aluminium alloy with STAINLESS STEEL bolts and coated by shinning painting, which lasts for a long time and looks gorgeous when a bike hanged on it. Outdoor available.

LARGE TIRE& WHEEL COMPATIBLE: The inside gap between wall and hanger is so big. Max rim depth: 50mm. Mounting flange has 2 holes, allowing use of bolts or lag bolts to mount. You can switch the hanger if you want the bike to hang on the left or right of it.

EASY HANGING: The hanger bar shape is a straight bar with a groove in the middle, compared with traditional hook. Very easy to hang your bike on it. Also the EVA coated hanger is so thick, it protects the rim better, such as carbon rims. Disadvantage: There is no holder or plate , so the front tire may leave marks on the wall.

STYLISH ALLOY: The hanger is made of aluminium alloy with STAINLESS STEEL bolts and coated by shinning painting, which lasts for a long time and looks gorgeous when a bike hanged on it. Outdoor available.

LARGE TIRE& WHEEL COMPATIBLE: The inside gap between wall and hanger is so big. Max rim depth: 50mm. Mounting flange has 2 holes, allowing use of bolts or lag bolts to mount. You can switch the hanger if you want the bike to hang on the left or right of it.

EASY HANGING: The hanger bar shape is a straight bar with a groove in the middle, compared with traditional hook. Very easy to hang your bike on it. Also the EVA coated hanger is so thick, it protects the rim better, such as carbon rims. Disadvantage: There is no holder or plate , so the front tire may leave marks on the wall.

Free Up Garage Space : It's great for garage,home,apartment with limited space.Hanging the bike on wall means free up valuable space. No more mess! You have more space to storage other items! solution to organize your garage free up space?This is the one you're looking for.

Heavy Duty Bike Hangers : The hanger is fixed to the wall with 4 screws. Every hanger holds up to 25kg or 55lbs ,it securely hold a normal bike on wall.(We highly recommend mount on stud.) The easy-to-take design makes it easy to take out and hang up the bike. You don't need to worry the hook will scratch the rim,as the hook cover with rubber.

Suitable for Most Bikes: Bikehand bike hanger is designed to fit most of bikes.Like Mountain Bike,Road Bike, Lady Beach Cruiser Bicycle etc. Fit all wheels size 14" to 29" in the range of the followings: (Max: Tire width: 2.4". Max rim depth for 700c: 50mm with max tire width: 25c.)

HEAVY DUTY: 2 inch diameter extra heavy duty aluminum alloy tube with Non-Slip Rubber Ends. Could easily handle max bike weight 20kg or 45 lbs per cradle. 2 bikes in total: 90 lbs. The Max height is 330cm or 10.8 feet.

EASY TO INSTALL & ADJUST: 90% Assembled And Just Needs To Install The Hook Claw Bracket, Angel And Height Adjustable For Fitting Most Type Of Bike Frames. You Can Watch Our Video Which Clearly Shows How To Install The Stand Rubber Hooks Anti-scratches.

CRADLE HOOKS: 2 cradles are included. They are EVA coated ensures on scratches on the frames. Easy to adjust the width, angle and height to fit all the bikes: such as ladies bikes, Y shape frame downhill bikes etc.

Floor Mounted Type, More Stable Mounting Bolt Included

Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.

MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.