Best Mikrotik Switches in 2026

16 Gigabit Ethernet ports

2 x 1G SFP ports

Smart software with easy-to-use interface offers managed control for secure setup, access, and SNMP (NMS 300) management.

The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port

The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy, plus it's very sleek and compact metallic case without any fans, for silent operation

It has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS

Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ port

It gives you all the basic functionality for a managed switch, plus more

Allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields

The RB260GS is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-3553LC20D (not included)

It is powered by an operating system designed specifically for MikroTik Switch products - SwOS

The CRS309-1G-8S+ is a very compact, yet powerful networking switch

It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps

The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS)

3 x 10GbE SFP+ ports (1 x 10GbE SFP+/RJ45 combo port)

8 x 1GbE (RJ45) ports

76Gbps switching capacity for full port throughput

The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.

CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size.

New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.

SWITCH PORTS: 16 -Port 10/100/1000

SIMPLE: Plug-and-play without a need for IT know-how or support.

FLEXIBLE: Extensive portfolio provides ultimate flexibility from 5 to 24 ports and PoE combinations

Use with external power supply to power up to 4 devices remotely over ethernet wiring up to 328 ft (100 meters) away

Add PoE ability to any Ethernet switch or router. Use this device and External power supply to inject power into the CAT-5, CAT-6 or CAT-7 cable.

10/100M operation. Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground.

11 Ports Includes: PoE ports: (1-6) POE/POE+ (10/100Mbps), BT Ports: (7-8) POE++ (1000Mbps), UpLink ports (L1, L2) (10/100/1000Mbps) and 1 SFP slot. The 2 uplink ports can be connected to different network devices, such as routers, NVRs, etc.

Built-in Surge Protection: 6KV lightning protection per port, 8KV electro-static, surge protection, short-circuit protection, over-temperature protection, over-current protection.

High power output: Comply with IEEE 802.3af/at/bt standard, Maximum support 120W high output power, ports(1-6) single port MAX output power is 30W, ports(7-8) single port MAX output power is 60W, capable of supply high power devices such as PTZ cameras, PoE LED lights IP Speakers, etc.

CRS312-4C+8XG-RM Mikrotik first product with 10G RJ45 Ethernet ports. It has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection

Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active

CRS312-4C+8XG-RM switch is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on

CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE

Four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps

There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately)

Simplify installations with a multi port PoE injector/adapter. Power up to 4 IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector.

Designed specifically for 24 volt Ubiquiti AC lite and Mikrotik Gigabit devices that require 10/100/1000 speeds. Passive "Always On" power will continuously deliver power to any device you plug into it.

Compatible with 24 volt Passive Mode B. This midspan injector meets the standard Mode B negotiation using pins 4,5(+) / 7,8(-) to deliver PoE power to your device. Includes a 24v UL/CE/FCC approved power supply.

Gigabit Power over Ethernet injector, 8 port wall mount with 24 volt power supply

For 24 Volt devices like Ubiquiti UniFi UAP-AC-Lite and Mikrotik gigabit devices, 10/100/1000 speeds. Please check manufacturer specifications for compatibility.

Shares data and power on pins 4,5 and 7,8; Passive "always on" power

CRS326-24G-2S+IN features: a pair of 10G SFP+ cages, 512 MB of RAM, 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall, NAT and even some VPN

Like many other MikroTik switches, CRS326-24G-2S+IN offers the dual boot option that allows you to use either the lightweight SwOS or the advanced RouterOS

The compact and quiet fanless desktop case makes this switch the perfect addition to the best home setups. And it is very easy to transport

The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports.

Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only).

The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip.

EASY TO SET-UP AND MANAGE: Connect devices securely, 24/7 port visibility, and simple cloud management with the Meraki Go mobile app; easily add multiple admins to help manage your networking equipment

PEACE OF MIND: Alerts for connectivity problems and remote troubleshooting tools when needed

FEATURES FOR BUSINESSES: Apply bulk settings to switch ports, VLANs, QoS

The Aruba Instant On 1960 24G 2SFP+ 2 10Gbase-T Switch is a high performance, smart managed stackable switch designed for small and growing businesses - fast set-up, easy management, and security you can trust

Stacking: Stack up to (four) 4 1960 (access and aggregation switches) switches and manage through one single IP address simplifying network operations. This means up to 288 ports including 16 10G uplink ports for high-density developments as well as flexibility for future network expansion. Flexible stacking at 1G and 10G speeds. Two Stacking modes: Local Stacking and Cloud-Managed Stacking (via Instant On mobile app or cloud-based web portal)

Configuration: Rack-width design with rack mounting ears for rack or wall or flat-surface mount. Ports and LEDs facing the front | #ABA US cord | Fanless silent operation | Limited Lifetime warranty