Best Oatey Transmission Tools in 2026

Enhanced Friction Durability For Smooth Transmission Performance

Meets Mercon And Dexron-Iiih Requirements

Also Satisfies Requirements Of Dexron, Dexron-Iii, Iie And Ii

Enhanced friction durability provides superior transmission life and promotes smooth shifting

Exceptional thermal protection guards against transmission wear

Certified and approved by Ford for all cars and trucks that require MERCON or MERCON V

Engineered to help alleviate typical problems experienced by transmissions with over 75,000 miles such as leaks and rough shifts

Greater frictional durability provides superior transmission performance

Additional seal conditioners to prevent or help stop leaks

UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.

COMPLETE SET: The discs sizes range from 18mm (0.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (0.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set.

EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.

【WHAT YOU GET】 8-inch lock ring pliers and 11-inch lock ring pliers.

【APPLICATION】 Spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts. Plastisol grips for anti-slip and added comfort. Spring loaded action reduces muscle fatigue for easy one-handed operation.

【MATERIAL】 Premium top-quality chrome vanadium steel, drop forged and heat treated for strength and durability, additional black oxide finishing improves the corrosion resistance of the surface and effectively prolongs service life of the plier. The antirust oil may be appeared on the tools, it will not effect the function.

J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions.

1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions.

Great Function – This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation.

5 TON COME ALONG WINCH: Heavy-duty mini come along five ton come along hand winch cable puller delivers serious pulling power for construction, home, farms, ranch, fences, and automotive use. Max horizontal load capacity of 10,000 pounds.

WINCH HOOK: Heavy duty puller steel construction for added durability; hooks and gears are zinc plated for a long-lasting life in your garage or workshop when pulling, dragging, lifting, or stretching. Safety latch on all hooks to prevent accidents or slipping off.

RATCHETING CABLE COME ALONG: Powerful ratcheting come along pulling system allows for one-handed operation when pulling or winching even the heaviest loads. The winch cable ratchet pulley system length is 6mm thick and 3.2 meters or 10 feet long.

APPLICATION: Big snap ring pliers or sometimes known as circlip pliers, retaining ring pliers or C-clip pliers are designed for installing or removing snap rings, jesus clips, and seeger rings which is a type of fastener that functions like a retaining ring.

DESIGN: Each retainer ring plier uses a spring ratchet locking mechanism to securely hold against circle tension and work with non-standard snap-rings or sometimes referred to as circlips. These mechanics retaining ring plier is also known as snap spreader.

DURABLE: The interchangeable tips are made with hardened, heat treated steel for durability and black oxide finish prevents corrosion for long-lasting service life and longevity in your toolbox or tool collection.

Wide Application – For use on universal transmissions and will fit most common clutch drums up to 6" in size. To check more applicable models, please refer to the description below.

Great Function – Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work. (Attention: Does not do rear case pistons)

Considerate Design – 6" long legs especially designed for deep drums. Similar to Atec Trans-Tool T-0158-HD. Mounts to work bench or table or on a bench vise.

Transmission Shiter Seal replacement tool kit,help to replace the seal.

Easy to use. In most cases, the gasket can be removed and inserted, so you don’t have to worry about removing the gearbox or lowering the gearbox.

Removal: Pass the tool over the shaft and screw it to the leaking seal. After the seal is engaged with the tool thread, turn it with a hexagonal bolt ，then you can remove the seal

10L Large Capacity: Our pneumatic ATF pump has a 10L large capacity. It provides an easy way to extract and dispense transmission fluid quickly and cleanly. It's an ideal tool for oil replacement.

GREAT COMPATIBILITY: The fluid transfer pump comes with 14 common adapters that fit a variety of automobiles, including famous cars like BMW, Porsche, VW, Honda, Audi and many others.

Dual Control Mechanism: The fluid pump's dual control system with two-way valves (blue screw knob and flow direction valve) allows easy conversion between oil extracting and dispensing.

Light Duty Transmission Jack: Ideal for removing transmissions and gas tanks on smaller vehicles. 450 lb Capacity

Max Strength: High grade steel construction for maximum stability; Requires 1/2"" drive ratchet (not included)

Easy Positioning and Alignment: Large adjustable saddle allows for ease of movement

APPLICATION: Compatible with Atec T-0015 and for Kent-Moore J-26744-A. Used as an auxiliary tool to rebuild for TH400 transmission.

UPGRADE DESIGN: Universal lip seal installer and remover, transmission tool will help you install and remove the lip seal on the transmission . It can protect precision seals and O-rings from being cut and damaged.

ADVANGE: Has 0.016 and 0.035 high strength steel wire loops on each end. If you want to carry out reconstruction work, this tool is a good choice.

【Removal and installation】: There is no need to remove the transmission disc, or in most cases, it is not even necessary to lower the gearbox.

【High quality】 using high quality steel rubber, performance is guaranteed, long life.

【Compatible with】Fits for gm200, 200C, 200-4R TURBO 350, 350C TURBO 400, 425, 475 gm700-R4 gm4L60 gmAllison - 540，includes Seal.

Great Compatibility — Fit For GM: 125/125C, 180/180C, 200/200-4R/200C, 250/250-C, 325/325-4L, 350/350C, 400, 440-T4, 700-R4, Powerglide, Super Turbine 300. | For Ford: A4LD, AOD, ATX, C3, C4, C5, C6, FMX & Jatco. | For Chrysler A404, 413, 417, 727 904 & 909.

Special Features — Most complete kit in the industry. Drives over 200 diferent bushing - foreign & domestic. Each part is manufactured to OEM specifications and testing.

Perfect Design — Similar to Atec Trans-Tool K&K OTC Kent-Moore SPX T-0220, T-0220-39 KT300 #72367. More efficient and easy removal and instalation of bushings on all the above automatic transmissions to save your time and money.

【Application】Fits for 4L60E 4LC65E 4L70E 4L80E; Fits for GM Chevy Cars and Trucks with V6 and V8 transmissions 1996 and newer; Fits for Impala C1500 C2500 C3500 K1500 CT4/5/6 Camaro etc.

【Must Have Tool】Special tools must be used to remove the leaking seal around the shifter selector shaft mechanism through the transmission case.

【High Performance】This handy tools set will help you easily & properly remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission.