Best Putco Truck Bed Rails in 2026

Fits 2005-2021 Toyota Tacoma, 2007-2021 Toyota Tundra,Compatible with Jeep Gladiator,Ram Rail System. (Must Have Deck Rail System).

Made of sturdy black nylon plastic; each tie-down bed cleat measures approximately 6” x 1”, Each bed cleat holds a maximum of 110 pounds.

Easy to install; Fully adjustable, each tie-down bed cleat slides along the Tacoma bed rail system using a spring-loaded, twist/locking clamp to hold it in place.

FITMENT | Fits 2002-2008 Dodge Ram 1500; 2003-2009 Ram 2500, 3500 Fleetside w/ 6.5' Bed - These BedRail Caps come with Stake Holes

SLEEK SMOOTHBACK STYLE | Featuring a smooth, sleek black finish, Bushwacker Smoothback BedRail Caps offer an excellent combination of solid protection and amazing aesthetic appeal for your bed rails.

ULTIMATE PROTECTION | Save your truck bed's top edge from dents, dings, and scratches as well as cover minor damage. Engineered for factory-tight fit with close tolerances and smoothly finished edges

FITS PERFECTLY - 2014-2023 Silverado 1500/Sierra 1500 5.5ft Short Bed. (Please contact us to confirm fitment before ordering.)

OUTSTANDING DESIGN - Provides anchors for attaching tie-downs within the truck bed, which increases your capacity to haul different types of odd sized objects.

SURFACE FINISH - Made by ultra strong and heavy duty mirror polished T304 stainless steel round tube for rust-resistant.

Fits Silverado trucks with the standard length bed measuring 78.9" (6.5') in length only. Does not fit any Dually models.

Please measure your bed before purchasing this product to confirm you are ordering the correct part.

For 2007 model year trucks this part fits new body style only - it does not fit 2007 Classic body style trucks.

SUPERIOR ILLUMINATION: MICTUNING 3pcs Crystal White 90-5050-SMD LED strip lights, total of 270 LEDs with high brightness. They light up the entire truck bed. Best for RV Awning Light, Truck Bed Light, Step Bar LED Lighting, Side Door Led Lamp, Pickup Bed Light Kit, etc

PLENTY OF LENGTH: 60" LED strips each, rated 12V, long enough for cargo/pickup/camper/garage/RV Awning lighting, rear window, party household decoration. Features 2x 79ft of power wire, 1x 20ft of power wire, easily to connect. BONUS an extension cord included

PROMOTE SAFE DRIVING: Comes with On-Off Switch and Blade Fuse, allow you to freely control the strips and ensure electricity safety in driving

Rugged Stainless Steel Polished To A Brilliant Shine

Thick 1.9" Diameter Tubing

Quick And Easy Installation Without Drilling

FITMENT | Fits 2005-2015 Toyota Tacoma Double Cab 5' Short Bed, SRW Gas

STYLE | N-Fab Nerf Steps feature a clean design that fits high and tight to the vehicle body in either premium textured black or gloss black finishes, adding to the modern look of your truck.

STRENGTH | The Nerf Step's fully welded 1-piece construction offers strength and durability.

Fits 5'5" to 6' Beds/Extra-Short Beds (63" Rail Length) | RAILS & Cleats Only. Does not include rack system

Creates a multitude of possibilities when choosing between t-slot equipped truck racks and inside mount truck bed covers

Includes set of 4 tie downs

Package Dimensions: 111.76 H x 7.111 L x 15.24 W (centimetres)

Universal install hardware kit sold separately

Package Weight: 18.189 kilograms

QUALITY TRUCK ACCESSORY: 47.5-inch long multi-fit universal bed rails; Essential accessory for any and all truck owners

No drill stake pocket mount design and multi-fit drill-on sizes

Welded steel base plate for extra strength and installation

Glued foam mounting gasket avoids metal contact

Direct replacement - this truck bed rail cover replaces the original part and matches the original color and texture

No special tools required - integrated retaining tabs require no hardware to install

Durable construction - this bed rail protector is made of UV-resistant plastic

【Replaces Part】Tacoma bed step ：PT392-35100.Please check whether the model is suitable before ordering.

【Compatible with】2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 Tacoma models with a factory tow package.

【High Quality】Tacoma bed step are made of reinforced, high-quality materials that are wear-resistant, corrosion-resistant, easy to clean, and long-lasting. When the steps are stretched, the non-slip, high-impact pad above the steps will provide you with a strong support foothold, allowing you to get in and out of bed easily and safely. When the steps are retracted, the steps fit into the bumper. Completely convenient for you, providing you with long-term stability and superior performance.

Bed Step for 2019 2020 2021 2022 RAM 2500 RAM 3500

Repalce Number : 82215842AC、82215842AD、82215842AE、82215842AF、82215842AG

Bed Step Manufacturued from high-strength aluminum , rated to support 300 lbs

Heavy duty 304 stainless steel with a polished finish

Universal length of 40 inch to 91.5 inch

Flexible mounting system accommodates most stake pockets with no drilling required

Fitment: UNIVERSAL 4ft (48 inch) BED (Rail Length 47-1/4") (Drill Mount)

Attention: Please confirm the model of your vehicle with the dealer before placing an order.

All mounting hardware and DIY instruction included. Fast and easy. No-Drilling DIY Installation. Using the original existing factory holes.

Wheel-to-wheel bars provide an extra step at the rear of the bar for easy access to the front of the truck bed, tool boxes or ladder racks; 5” Oval step provides extra-wide stepping surface

Rugged and durable black powder coated steel is corrosion resistant

Non-slip, flat step pads provide traction for safe footing

Non-slip, retractable step can be mounted on either side of the truck box, just behind the cab and forward of the rear wheel to provide easy access to the truck bed, tool box or 5th wheel hitch

Step quickly flips down or retracts with just the nudge of your foot and is engineered to support loads up to 300 pounds

High-strength aluminum alloy components and precision stainless-steel pivot pins for rock-solid stability

Mirror-finish premium grade stainless steel

Attaches with high performance 3m adhesive

Offers protection and enhances appearance

Item Package Dimension:4.0 Inches L X69.0 Inches W X6.0 Inches H

Item Package Weight:13.89 Pounds

Product Type:Auto Accessory

Wheel-to-wheel bars provide an extra step at the rear of the bar for easy access to the front of the truck bed, tool boxes or ladder racks; 5” Oval step provides extra-wide stepping surface

Rugged and durable black powder coated steel is corrosion resistant

Non-slip, flat step pads provide traction for safe footing

The kit includes 2 Bed Rails + Mounting Hardware + DIY Instruction.

The rails are made of marine-grade T304 stainless steel in high polished mirror finish.

Bed rails are paintable for an exact color match.

Tool Less installation

Include 5 Twist Lock Anchors

All Steel Welded/Powder coated

PATENT PENDING

NO DRILLING FLAGPOLE MOUNT FOR PICK-UP TRUCK BED

NO DRILLING Bed Rail Flag Pole Mount Holder Mounting System for Toyota Tacoma Tundra Pickup Truck - Steel

Features unique oval tubing

Solid die cast construction on the bed rail ends allows for extreme tie down strength

Easy no drill installation via stake pockets

Premium grade heavy gauge tread bright aluminum

Attaches with high performance 3m adhesive

Offers protection and enhances appearance

Premium grade heavy gauge treadbright aluminum

Attaches with high performance 3m adhesive

Offers protection and enhances appearance

Function: This Bed Step provides truck owners with easy access to pickup beds. Step quickly flips down or retracts with just the nudge of your foot.

Good Performance: This easy-to-use, flip-down step mounts to vehicle frame and stores under the rear bumper when not is use. The non-slip step is molded of strong glass-reinforced resin, for safe footing even in mud, snow or ice.

Premium Material: Manufactured from high-strength aluminum with a black powder-coat finish to ensure the stability and maximum corrosion protection.

Features unique oval tubing

Solid die cast construction on the bed rail ends allows for extreme tie down strength

Easy no drill installation via stake pockets

Features unique oval tubing

Solid die cast construction on the bed rail ends allows for extreme tie down strength

Easy no drill installation via stake pockets