Best Plastic Truck Tie Downs in 2026

SECURE AND SAFE - These 2" x 12'' Heavy Duty Cam Buckle Logistic Cargo Tie-Down Straps have an assembly break strength of 3,000 pounds and a Safe Working Load Limit of 1,000 Pounds. Easily Secure Cargo Loads In Your Box Truck, Cargo Van, Pickup Bed, Flatbed/Utility Trailer, Enclosed Trailer, or Warehouse With The Convenient And Versatile E-Track System; each yellow E-Track strap tie down has E-Track spring fitting attachments at each end that click into slots on your E-Track rails or singles

DURABLE - Never replace your straps again! These Cam Buckle Tie-Down Cargo Straps are made out of durable yellow polyester webbing (strap material) that is water- and UV ray- resistant. They won't shrink or stretch even when wet. The steel cam buckle is made to ensure the most reliable trailer and truck cargo securement throughout the bumpiest rides.

EASY TO USE - See the image for 6 Easy How-To Steps. 1. Open the cam buckle by lifting the lever and threading the loose strap end around the bottom rod of the spindle (cam buckle handle) 2. Pull the excess webbing through and pump the strap tight until it is wrapped securely around your cargo load 3. Clip the lever down and your load is secure!

【EASY TO INSTALL】No tools and no drilling is required, just slide the tie down anchors into the brackets and lock it. Plug and play.

【QUALITY ASSURANCE】Thick truck bed hooks constructed of die-cast zinc with heavy-duty plastic housing and stainless steel Lock Assembly. 4 packs bearing up to 1000LBS, confide your good in place. Perfect for commercial and home use.

【PERFECT FIT】Tie down anchors compatible with 2015 2016 2017 2018 2019 2020 2021 2022 F150 F250 F350 and Raptor Models. Replace OE# FL3Z99000A64B.

✔ HEAVY DUTY: 8 pack | Hardware NOT included. These heavy duty 1-1/2" inner clearance D-rings are made of high quality galvanized steel for rust and corrosion resistance. Assembly break strength of 6,000 pounds and a safe work load limit of 2,000 pounds.

✔ WELL-DESIGNED: The D-ring lies flush in its 4-3/4" x 4-1/2” square recessed-pan fitting so the D-ring doesn’t hazardously protrude from the floor. Weep holes on bottom of the pan ensure that water drains out.

✔ EASY INSTALLATION: Use a hole saw and chisel and bolting hardware - not included. The 1/2” x 1/2” square bolting holes are perfect for securing your anchor with CARRIAGE BOLTS. These can be low floor flush mounted onto wooden trailer floors and other surfaces.

【Heavy Duty Suction Cup Anchor】Our strong suction cups with hooks have stronger carrying capacity than most suction cup anchors on the market. It can carry up to 70 pounds. The diameter of the large suction cup is 9cm/3.55inch. It is the largest diameter suction suction cup anchor on the market. The larger the bottom area, the stronger the suction force and the heavier objects can be hung.

【Removable & Reusable】The nylon strap and suction cup anchor are detachable and can be used separately. You can install other hooks on the suction cup for DIY more functions. If the suction cup anchor lose some stickiness when you take it off, you can rinse the suction cup with water (no soap), massage the suction cup at the same time, and then dry it. This will restore the strong stickiness of the sucker. The service life of each suction cup is long enough.

【High Quality Material】Our suction cup with hooks are made of high-quality ABS&PVC. Package contains nylon straps, which has the characteristics of beautiful color, strong friction and light weight. The bottom of the suction cup is made of PP and TPU solid materials, can be washed, supports repeated use, and has a long life.

Usage: Utility t bolt eye nut kit to make tie down points on roof rack, truck bed, kayak tracks, designed for holding bungees cord, cargo net, tie down straps, roof rack straps, cam strap for kayak, and more, ideal for lifting most equipment

Mounting Type: These t-bolts are perfectly fit most roof rack crossbar with T/C channel, easy to set, secure way to holding your bungees, cargo net and more

Dimension: Female thread m8 ring eye bolt, square head T-track bolts base dimension - 0.79 in x 0.79 in, washer - 0.04 in x 0.47 in x 0.2 in, nut - 0.39 in x 0.2 in

Tie down straps are ideal for trailering, fishing and skiing boats from storage to the water

To use, place s-hooks on trailer and boat transom anchor points and tighten to secure

Designed for marine use, straps are made with tensile polyester webbing that allows less stretch than comparable nylon tie downs even when wet and aids in resistance to UV rays, mildew, and shrinkage

The tie-downs consist of two parts; an outer ring and the inner ring. The outer ring is raised and made of industrial-grade black ABS plastic. This ring enables the inner ring to swivel around to different angles, giving you the freedom to tie down items at a variety of locations. The inner ring is made of coated steel and is resistant to water, weather, rust, and harsh weather conditions.

This durability extends to its weight capacity, which is 1500 Lbs. For use in trailers, this weight limit is perfect for larger loads. These trailer buckles are a simple bolt-on/screw-on installation to any flat surface

Being a surface mount tie-down with D-ring, they are used for more any trailer or RV, however, they work specifically well on flatbed trailers and interior walls of trailers. These D-ring furniture tie-downs are sold in packs of 2, 4, 6, and 10 and have a diameter of 4 inches. The D-ring has a ¼” diameter.

✅ [HEAVY DUTY TIE DOWN RINGS FOR MULTIPLE APPLICATIONS] - Pit Posse's recessed rotating D rings are designed for heavy duty floor applications. Compatible with any truck bed, or perfect for the floor of your trailer, SUV, or truck. Can also be used to keep your motorcycle from tipping over or your gear from sliding around when in motion.

✅ [ROTATES A FULL 360 DEGREES] - Unlike other similar tie down D rings, Pit Posse's have a 360 degree rotating feature giving you optimal maneuverability, and giving these tie downs countless different uses! Tie downs measure 3.5" inches across.

✅ [BUILT FOR STRENGTH AND DURABILITY] - Each tie down has a breaking strength capacity of 3,500 pounds #MBR. Made from high quality corrosion resistant material, making them extremely durable and guaranteeing they will last for years!