Best Phanxy Vibrators in 2026

Powerful Vibrator Motor: Voltage: 110V(Single Phase); Power: 100W; Current: 1.3A; Vibrating Force: 50kg; Speed: 3600rpm. This concrete vibrator motor is made of upgrade material and its aluminum alloy case ensures durability.

High-efficiency Devices: The concrete vibrating motor adopts precise bearing, rotor, pure copper coil, all of which makes this machine run smoothly, high-efficient, power-saving, and low-noise. It also has a starting capacitor.

Adjustable Excitation Force: The angle of the eccentricity block of this vibrating motor is adjustable, making it possible to adjust the excitation force. Thus, it can meet all kinds of requirements.

High-quality Material: Aluminum alloy housing, silver copper converter, all stainless steel bolts and nuts. Motor uses ferrite magnet and oxygen free copper rod for long term work.

Specifications: Motor: DC12V, 200lbs; MPN: DC80M; Power: 60W; Motor speed: 4000 RPM. The small concrete vibrator can be widely used in the following fields like mining, grain machinery, electric power, metallurgy, coal, construction, casting, food machinery, sieve powder, powder spraying equipment, etc.

Durable Cable: 42"SJEOW cable with SAE J-928 two pole connector;

✅ Powerful Concrete Vibrator: 2 HP(1500W) Concrete Vibrator More power than 3/4 HP(550W). Voltage: 110V; Diameter: 1-3/8 inches, Lightweight and compact design for all day use.

✅ Efficiency Concrete Vibrator 1-3/8" diameter vibrator, 13,000 vpm, improve your work efficiency.

✅ Long Work Area 6.6ft. long shaft for easy use and long reach, enlarge your work range. ✅ Handheld concrete vibrator with ergonomics design lock-on button for extended use, it can reduce your work pressure.

【30W VIBRATING MOTOR】GPOAS Vibration Motor:Power-30W; Voltage-110V/Single Phase; Current-0.26A; Speed-3600RPM; Vibration Force-20KG/0.2KN; Insulation Class-F; Waterproof Class-IP65.We provide customer service, if you encounter any problems please contact us.Note:Remember to regularly check the tightness of the mounting screws and the dust on the vibrating motor surface.

【PURE COPPER COIL】This small vibration motor is equipped with a pure copper enameled wire stator that is resistant to high temperature of 180℃/356℉, which is characterized by low temperature rise, long service life, strong magnetic field and “F” high insulation level.

【HIGH PERFORMANCE COMPONENTS】This vibration motor adopts high performance bearings:high precision, low noise, smooth operation and long service life.It also adopts full cast aluminum rotor with large magnetic field,and the high-precision shaft of the rotor is integrally stamped and formed and made of 45# high-hardness steel processed by high frequency.

<b>EASY USE:</b>1.75 HP The Lightweight and Compact Design is Ideal For Consistent Use

<b>IDEAL: </b>This Concrete Vibrator is Ideal For Construction, Patching and Other Repair Jobs.

<b>HANDY LOCK: </b>The Features a Handy Lock-on Button For Extended Use

【EASY TO USE】: The lightweight and compact design is ideal for consistent use and a handy lock-on button for extended use.

【IDEAL FOR OPERATION】: This Concrete Vibrator is Ideal for Construction, Patching and Other Repair Jobs.

【HIGH EFFICIENCY】: With an Impressive Vibration Frequency of 13000/ mins. And Removes Air Bubbles Helps Concrete Settle Faster and Strong.

【Power Concrete Vibrators】Hand Held Concrete Tools, 1500W Power, 110V/60Hz Voltage frequency, Speed is 4200rpm, The vibration frequency is 240HZ per second. As we all know, the greater power of the concrete vibrator, the better effect of the vibration. This High-power construction tools will make your work easier and efficient.

【High-quality Motor】The concrete vibration motor use of high quality and temperature resistant pure copper enameled wire, full copper winding, which is not only sturdy and stable, but also has a longer service life.

【External Carbon Brush Holder Design】The all-copper carbon brush holder is externally designed, which can easily and quickly replace the carbon brushes, making it easier to maintain this product.

EFFICIENT & LONG REACH - BEAMNOVA concrete vibrator features of powerful 110V 60hz 1500W electric motor and vibrating head that gain speeds up to 11000 rpm. Vibrator shaft is of 1-1/2 diamter and the length is up to 14-3/4 ft. It helps to enlarge your work range and improve work efficiency.

USEFUL - Immerse the head of concrete vibrator into wet concrete to remove any trapped air and excess water to allow the concrete to settle within the formwork properly and solidly. Also you can use it to level the concrete.

USER-FRIENDLY DESIGN - Metal-Built Case is ot non-scrolling design, lightweight, rugged and durable, able to prevent cement from penetrating. The vibrating 1-1/2 inch head is capable of inserting into concrete via small holes or gaps. 14-3/4 ft vibrator shaft can reaches deeper and farther.

The lightweight and compact design is ideal for consistent use and a handy lock-on button for extended use.

This Concrete Vibrator is Ideal for Construction, Patching and Other Repair Jobs.

Well constructed with quality materials, Easy to maintenance and inspection.

★【POWERFUL CONCRETE VIBRATOR】: 12.5A high power copper motor allows evacuating the air bubbles efficiently and having the ideal consistency. Reinforced cast aluminum shell and 1-3/8 inches diameter shaft offer you more durable construction tool.

★【HIGH VIBRATION FREQUENCY】: This portable insertion vibrator delivers powerful vibration at 14400VPM to ensure perfect homogeneity of the concrete and obtain a smooth and even finish. 6.6 foot long flexible shaft gives you ample reach for different projects.

★【COMPACT & CONVENIENT】: Compact and lightweight design makes this electric vibrating machine easy to use without wearing you out. Thanks to the lock-on button, it can run without requiring constant pressure on the trigger.

【High-quality Aluminum Alloy】 The vibration motor adopts high quality aluminum alloy and stainless steel case precision casting ,it is a one-piece sealed structure design and uses the sealing groove and the O-shaped seal, which improve the waterproof and dust proof functions of the vibration motor.

【Excellent Bearings】 The vibration motor adopts is import bearing, precision, low noise, wear resistance and long using life.

【Pure Copper Enameled Wire Stator】 The vibration motor stator adopts high temperature resistant pure copper enameled wire, full copper winding, and adopts special vacuum dip coating process, insulation grade.

PROFESSIONAL APPLICATION - Power Cement Vibrating Immersion rods excel in aiding concrete pouring and form-work to settle correctly, firmer, faster, and stronger. The vibrations remove excess water which is essential in the removal of air bubbles in poured concrete, to level curing cement. Commercial quality great for the construction of of tunnels, bridges, roads, highway guardrails, roman columns, high-rises, cement grape trusses and port, including patching and other repair jobs.

HIGH PERFORMANCE SPECS - Runs at 4000RPMs with an Efficient Frequency Speed Vibration of 13,000 VPM (Vibrations per Minute); a Shaft Length of 4.9 feet (1.4m) and a Vibrating Head Length of 15-1/8 inch and a Rod Head Diameter of 1-3/8 inch (35mm) (Note: gently tap the rod head on a hard object to make the shaft vibration frequency match the vibrator during start up)

BUILT TO LAST - Designed with a thickened cast aluminum housing and a built in air vent allowing for great heat dissipation. The electric temperature resistant full copper coil winding enameled wired Motor provides light resistance for long life; Double Insulated high-strength gears, an aluminum metal thread head assembly connection, resilient steel wire braided flex hose all combine to deliver a durable and secure concrete tool built to last.

[HIGH EFFICIENCY]: The length of vibrator shaft is up to 4.5M (14-3/4feet) with 1.5" diamter head, enlarge your work range, improve your work efficiency. Can meet more professional work scenarios.

[UPGRADED LEADING DESIGN]： BIZOEPRO 1500W concrete vibrator can be work not require a tap or knock at the vibrator shaft. Added temperature protection devices can improve product reliability.

[HIGH POWER]: Remove air bubbles and level concrete stably. Ideal for Construction, Patching and other repair jobs. With protective metal roll cage, Lightweight and more safe during using it.

【100W AC Vibrating Motor】This concrete vibrating motor power: 100W; vibration force: 100kg; speed: 3600rpm; voltage: 110V (single-phase) insulation class-F; waterproof class IP65

【Upgraded aluminum alloy and stainless steel material】The vibration motor is made of high quality aluminum alloy and stainless steel shell precision casting, which is a one-piece sealed structure design to ensure durability, light weight and fast heat dissipation

【Adjustable eccentric block】The angle of the eccentric block of this vibration motor can be adjusted to support stepless adjustment of vibration force to meet various working requirements. Note: The eccentric blocks on both sides of the vibration motor must be confirmed to be symmetrical.

👍【Parameter Characteristics】The working parameters of our vibrating motor are as follows: Voltage:AC110V, Current:3.8A ,Power:280W, Frequency:60HZ, Rotating speed: 2840RPM, Vibration force: 300kgf.

👍【Premium Bearings & Full Copper Coil】The concrete vibrator vibration motor made with high qulity bearings and full copper coil, so it has the features of low noise, smooth operation, endurance, wear resistance

👍【Fully Sealed Body】The casing of the concrete vibrator motor is made of cast iron, which is sturdy and durable. The casing is fully sealed, dustproof, anti-oxidation and rustproof. It is a 360-degree three-dimensional machine with faster heat dissipation and longer service life.

Powerful Concrete Vibrators-Runs at 4200RPMs with an Efficient Frequency Speed Vibration of 13,000 VPM (Vibrations per Minute),110V/60Hz Voltage frequency; a Shaft Length of 4.9 feet (1.4m) and a Vibrating Head Length of 15-1/8 inch and a Rod Head Diameter of 1-3/8 inch (35mm)

Lengthened Vibrator- Copper shaft about 6.6 ft for more work area and easy use to long reach,enlarge your work range.

Easy Operation&Waterproof- With lock switch function, you don't need to press the ON/OFF switch, it will work continuously.Waterproof switch cover and special heat outlet design to ensure this hand held construction vibrator to reach splashing water resistance level.

Widely Applicable - Great for patching and construction job, pouring process of cement pillars, construction of highway fence and bridge, pouring process of cement grape rack, etc.

Large Work Area Coverage - Vibrator shaft length up to 18 feet with 1.5" diameter head, enlarge your work range, improve your work efficiency

High Stability Equipment - Immerse the head of this concrete vibrator into wet concrete to release any trapped air & excess water to allow the concrete to settle within the formwork properly & solidly

EASY TO USE: The lightweight and compact design is ideal for consistent use and a handy lock-on button for extended use

IDEAL FOR OPERATION: This Concrete Vibrator is Ideal for Construction, Patching and Other Repair Jobs.

HIGH EFFICIENCY: With an Impressive Vibration Frequency of 13000/ mins and 850W Power. And Removes Air Bubbles Helps Concrete Settle Faster and Strong

🧱【Strong & Powerful Concrete Tools】IRONWALLS power concrete vibrators is featured with 110V 1500W 2HP powerful electric motor and vibrating head that gain speeds up to 18,000 rpm, which makes it remove air bubble level concrete more stable and faster.

🧱【High Efficiency & Long Reach】The concrete vibrabrater shaft rod is up to 4.5m (14-3/4 ft.) long, which can reach deeper and farther. And the vibrating 1-1/2 inch head is capable of inserting into concrete via small holes or gaps. Both them effectively help you enlarge your work range and improve work efficiency.

🧱【User-Friendly Design】Coming with non-scrolling, solid metal-built case, lightweight, rugged and durable, able to prevent cement from penetrating. Simple button switch with dust-proof & waterproof cover makes the vibrator more safe & easy to operate.

✔【Working Datas】Rotary speed: 2840RPM. Vibration force: 300kgf. Voltage: 110V. Frequency: 60HZ. Motor power: 280W. Current: 3.8A. Popular to the densely vibrating engineering of modern structure

✔【High Quality Bearings & Full Copper Coil】Constructed with high qulity bearings and full copper coil, our electric concrete vibrator motor has the features of low noise, smooth operation, endurance, wear resistancelong service life

✔【Durable Power Cable】The power cable of the concrete vibrator for concrete vibrating table is made of four-core rubber cable power cord, which is durable and practical, high-strength bending and not easy to break

【Widely Applicable】- This Concrete Vibrator is Ideal for patching and construction job, pouring process of cement pillars, onstruction of highway fence and bridge, pouring process of cement grape rack, etc. It helps to remove air bubbles, and excess water and level the concrete.

【Main Parameters】- With an Efficient Frequency Speed Vibration of 4300r/min (Vibrations per Minute); a Shaft Length of 3.9 feet (1.2m) and a Power Cord Length of 4.9ft/1.5m and a Rod Head Diameter of 1-3/8 inch (35mm) (Note: gently tap the rod head on a hard object to make the shaft vibration frequency match the vibrator during start up)

【Easy To Use】- The lightweight and compact design is ideal for consistent use and a handy lock-on button for extended use. Non-slip handle ensures safety and stability. Thickened and strengthened cast aluminum casing , Enlarge the air outlet and adopt a porous heat dissipation design.

Pure Copper Wire-This 250W portable vibrating troweling has all copper coils, which has stronger power.

High-Precision Material-casting by precision machining, running smoothly. High precision bearing, low noise, high load, long service life.

High Efficiency-The Vibration Speed Can Reach 3500 RPM Realizing Quickly Smoothed. the Same Area Takes Less Time Which is Power Saving. Vibration Force: 100KGF.

【POWERFUL VIBRATOR MOTOR】This industrial vibration motor features with 30W power, 4000RPM maximum speed, 20kg/44.1lb/0.2kn vibration force, 50Hz frequency and IP65 waterproof grade, which is well sealed and very safe, provides dust and IP65 waterproof function, is easy to wire and easy to install on the machine. #1: DC12V 2.1A and #2: DC24V 1.6A optional.

【HIGH PERFORMANCE COMPONENTS】This electric vibrator motor adopts accuracy bearings, rotors and copper coils, which make the machine run smoothly, efficiently, save electricity and low noise. The temperature resistant pure copper enameled wire is characterized by low temperature rise, long service life, strong magnetic field

【ADJUSTABLE EXCITATION FORCE】The angle of the eccentricity block of this DC brushless motor is adjustable, making it possible to adjust the excitation force. Therefore, it can meet various requirements. It adopts upgraded materials, and its hard and wear resistant aluminum alloy housing ensures durability.

[Powerful and High-Speed]- Concrete Vibrator features of powerful 110V 50hz 1500W electric motor and vibrating head that gain speeds up to 16000 rpmand . Lightweight and compact design,High efficiency, stable performance and long service life. Ideal for construction, repair and other maintenance work.

[Long Poker]- The length of the shaft is 4.5 M (14-3/4feet) and Diameter: 38mm (1.5 inches), which expands the working range and improves work efficiency.

[Roll Cage Design]- The protective metal frame prevents the concrete vibration motor from sliding. Dip the concrete vibrating rod shaft into the wet concrete to remove bubbles and excess water so that the concrete settles in the formwork correctly and firmly.

High-quality Motor: 800w High-power Motor Adopts Temperature-resistant Pure Copper Enameled Wire and All-copper Winding. It Is Not Only Firm and Stable, but Also Has a Longer Service Life.

Easy to Operate: the Anti-slip Electric Machinery and the Lightweight Design of the Body (15.43 Lbs) Are Ideal for Continuous Use. at the Same Time, the Locking Button on the Electric Machinery Can Prolong the Use Time and Reduce the Working Intensity.

High Efficiency: the Amazing Vibration Frequency of 13000vpm Can Effectively Remove Bubbles and Help Concrete to Set Faster and More Firmly.

High Performance Concrete Vibrator - VISHIGH’s new released 800W and 1200W concrete vibrators, are suitable for various sizes of concrete pouring work and are the first choice of household tools with excellent cost performance.

Lightweight Handheld Tool - The motor weighs only 4 pounds, so you can easily operate the motor with one hand. The round lock button on the side can keep the motor running, so you can focus on handling your concrete construction.

Concrete Strength Enhancement - VISHIGH concrete vibrating tool can reach up to 12,000 vibrations per minute. By connecting the hose to the motor and inserting the metal part into the cement, you can easily remove the air that enters when pouring.

Efficient and Effective: The 110V 220V Electric Vibrating Sieve Machine Shaker Powder Particles Shaking Vibrator is an efficient and effective tool for separating particles and powders of different sizes. The machine uses a high-frequency vibration to shake the sieve, allowing smaller particles to pass through and larger particles to be filtered out.

Adjustable Settings: The vibrating sieve machine has adjustable settings that allow you to control the frequency and amplitude of the vibration, making it easy to customize the machine to your specific needs. This also makes it suitable for a wide range of materials, from fine powders to coarse granules.

Easy to Use: The sieve machine is easy to use, with a simple control panel that allows you to adjust the settings and start the vibration with the touch of a button. It is also easy to clean and maintain, with a removable sieve that can be easily washed and replaced.

【Efficient Vibration】Using this concrete vibration leveling tool is 4 times faster than traditional manual concrete finishing methods, saving more than 75% of labor

【Powerful screed】6000mAh battery-operated screed for concrete finishing, with pure copper high-frequency brushless motor, can achieve a maximum 6000 rpm uniform vibration on a 6ft slab, with a performance close to that of a concrete bull float Trimming effect

【Humanized design】Electric cordless screed cement finishing vibration motor feels comfortable, anti-skid, shockproof, one-button start, easy to operate, triangular fixed structure, sturdy and reliable