Best Movo Video Camera Stabilizers in 2026

Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.

For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.

Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.

【HIGH CUSTOMIZATION】SMALLRIG Adjustable Monitor Mount 2889 can hold your monitor or accessory onto the handheld stabilizers. The mount is compatible with DJI RONIN-S/RONIN-SC & ZHIYUN CRANE 2S/CRANE 3/3S/WEEBILL-S & MOZA AirCross 2 Gimbals. The monitor mount features three 1/4"-20 threads for additional accessories such as SmallRig Cold Shoe 1241 for microphone or sound receiver.

【ROSETTE MOUNTING PLATE FOR RONIN-S/SC】The mount attaches to the mounting threads for ZHIYUN CRANE 3, CRANE 3S, WEEBILL-S, or WEEBILL LAB with a built-in thumbscrew, and a rosette adapter plate is included to attach the mount to the DJI Ronin-S or Ronin-SC with two included M4 screws.

【ALSO FITS MOZA AIRCROSS 2】For Moza AirCross2, please do attach the Mounting Plate 2826 first before attaching the monitor mount

Compatibility : SMALLRIG Top Handle with Locating Holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal cold/hot shoe mount

Lightweight Only 124g : Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone

Built-in Cold Shoe Mounts : It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories

【New Version】This SMALLRIG top handle is a new version, the cheese-style grip is ergonomically designed to offer a more comfortable handheld experience

【Please Note】The handle could NOT be used on camera cage directly. The shoe mount adapter of the top handle fits any camera with a standard hot shoe, such as camera for CANON R5/R6/R7, for Sony A7 IV etc.

【Load Capacity】It could be directly mount onto the hot shoe of small mirrorless camera for low angle shooting. The maximum load of this camera handle is 1.5kg

FOR DJI Ronin-S/SC and RS 2/RSC 2/RS 3/RS 3 Pro/RS 3 mini: Designed for DJI Ronin-S/SC and RS 2/RSC 2/RS 3/RS 3 Pro/RS 3 mini Handheld Gimbal. It provides multiple mounting holes for accessories attachment such as monitor mount 2070

INSTALLATIONS: It is fixed on the side of Gimbal for Ronin S &SC via two M4 screws after taking off the small plate for DJI which covers the electronic contacts

NATO RAIL: Comes with Nato rail for the Nato Side Handle 1688/2187

【Whole Solution for Vlogging】SmallRig Professional Phone Video Rig Kit 3384B is specially designed for vlogging and live streaming, and supports both handheld shooting and tripod shooting. The kit includes a universal phone cage 2791, two side handles 2772, a desktop tripod BUT2664, a mini LED light 3286, a microphone 3288, a power bank holder 2790, a cold shoe mount 1241, 2 cables,etc.

【Wide Application】The phone cage is compatible with phones with a width range from 62mm to 86mm. Suitable for most smartphones, such as for iPhone 14/14 Pro/14 Pro Max/ for iPhone 13/13 Pro/13 Pro Max/12/12 Pro/12 Pro Max,for Huawei for Samsung, etc.

【LED Light】Video LED Light is a lightweight, portable and stylish mini-LED light, with 0-100% brightness control, CRI95, and color temperature scale from 2700K to 6500K. The light comes with a built-in 2200mAh lithium-ion battery, which is charged via the included USB Type-C charging cable and features a 105-minute operating time (maximum brightness).

▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw

▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp

▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter

【LIGHTWEIGHT CHEST PAD】SmallRig MD3183 is designed for reducing the sense of the weight of long-term handheld shooting, in order to make the shooting process more labor-saving and stable. If you operate your camera in the center front of your body when in handheld mode, you could add this Lightweight Chest Pad 3183 to your 15mm LWS rig for a comfortable stabilizing option.

【MOUNTS ONTO SEPARATE 15MM LWS RODS】The pad mount features a 15mm LWS rod clamp that can mount onto any standard, separately available 15mm rods, and it can slide back and forth for adjustment along the rods. You can connect the camera through SmallRig 15mm rods such as 851 and SmallRig universal baseplate 1674, support it on the abdomen or chest for shooting.

【ROTATE UP TO 150°】The rotating structure can be adjusted by 150°, and the damping feeling can be adjusted by the included Allen wrench.

【Carbon Fiber 15mm Rods】 Made of 9 layers of carbon fiber, these 15mm rods are resistant to corrosion, impacts, bending, and high heat, ideal for both indoor and outdoor video production. Matte finishes also eliminate reflections that might spoil your image

【Lightweight Yet Sturdy】 Compared to conventional aluminum alloy rods, the weight of this 15mm rod set is significantly reduced to 2.5oz (70g). Yet the rigidity remains to support various accessories with great security

【Universal Compatibility】 This 15mm rod set is compatible with shoulder rigs, camera cages, baseplates, and rod clamps that feature the standard rail support system. 12inch (30cm) in length, it also allows flexible and smooth positioning

【CAMERA SHOULDER RIG】The camera shoulder rig is an assembly of SMALLRIG Rubber Handle 1963, Extension Arm 1684 and Rosette Bracket 1898

【STABILIZE SHOOTING】The shoulder rig support comes with two handles with rubbers, improve your hand-held shooting and eliminate jitters while you are taking a still video and RUN&GUN shooting

【COMPACT DESIGN】Updated Rosettes for tighter installation. Made of aluminum alloy, durable and sturdy build, fix firmly and securely

Compatibility: SmallRig camera all-in-one full cage is customized designed for FUJIFILM X-H2 / X-H2S with FT-XH Battery Grip/VG-XH Battery Grip to protect camera and prevent from scratching, provided mounting points to attaching accessories

Anti-deflection & Anti-scratch: X-H2 / X-H2S Camera cage locks the camera via one 1/4''-20 screw at the bottom and two side lock adapters, and features several rubber cushions to prevent scratches

Multiple Mounting Points: It comes with 1/4 "-20 and 3/8"-16 threaded holes for top handle 2165 & 1638, side handle 2093 & 2425, for HDMI cable clamp 1693 for stable data transmission, monitor mount 2903B & 2904B for attaching monitor, magic arm 2115; two cold shoe mounts for microphones, LED lights, etc

Enlarged Hot Shoe Space: The new version of the cage enlarges the space around the camera hot shoe, and now you can use the cage together with the Microphone ECM-W2BT for Sony, Flash HVL-F32M or other accessories that require the use of the hot shoe on the top of the camera.

Enlarged Battery Compartment Space: The space for the battery compartment at the bottom of the cage is enlarged, making it easier for you to change memory cards. The cage does not interfere with the use of buttons, card slots, battery compartments, and flip screens. There is a slot in the battery compartment to place the dummy battery cable. When using the dummy battery, the camera can also be placed flat on the table.

Multiple Mounting Options: The cage has built-in multiple 1/4"-20 threaded holes, 3/8"-16 positioning holes for ARRI, which can be used with the Top Handle 1638, 1446, 1984 and 2165 for low-angle shooting; it can also be installed with a Power Bank Clip BUB2336 to fix the power bank near the camera for continuous power supply. There is a built-in cold shoe on the top and bottom of the cage, which can expand the Microphone 3468 and LED Video Light 3286 for a complete vlogging solution.

For DJI RS 3 Mini / RS 3 / RS 3 Pro / RS 2 / RSC 2: SmallRig Sling Handgrip 3028C designed for the DJI RS series reduces arm fatigue and adds stability to low-angle gimbal shots. It can support up to 8 kg / 17.6 lbs and adopts a longer arm bracket, making it more versatile for RS 3 Pro and larger camera setups.

Optimized Ergonomic Design: This gimbal sling handle has been updated with a curved design that better fits ergonomics. Its grip length has been increased with finger stops, providing a more comfortable and secure grip for larger hands. Constructed with a combo of silicone and aluminum alloy, it is lightweight but strong. Its sleek design and compact structure match perfectly with the stabilizer.

Quick Release Features: It securely attaches to your gimbal with a NATO clamp, with anti-removal stud for safe and quick operation. On this version we integrate a NATO rail on the side, allows for mounting SmallRig 3026B to provides a good spot for your monitor. Additionally, a QD socket is added, providing the option to mount a QD neck or shoulder strap for additional support.