Best Wiwav Wall Switches in 2026

Repair or Replace – This grounding toggle switch is the perfect solution to repairs or replacements around home. Whether you’re a general contractor or a DIYer, this unit will make upgrading your bedroom, kitchen, office or other space a breeze.

Easy Installation – Whether using the proprietary Pressure-Lock wiring system or utilizing the traditional screw terminals, wiring this toggle switch is quick and easy.

Complementary – The light almond finish provides this unit a sophisticated appeal and make it the perfect accessory to any new build or an easy upgrade that is sure to enhance your existing décor.

Repair or Replace – Fix old or broken rocker switches in your bedroom, kitchen or work space with the GE Grounding Paddle Rocker Switch 5 Pack

3-Way – For use with permanently installed lighting fixtures controlled by one or two switches

Colors – Available in white and light almond to best complement your existing wall plate

NOTE: The grey area is not the dial.The turnable dial is in the middle.

Schedule your lamps, fans, appliances, seasonal lighting, AC units and other devices ON and OFF at your set desired times saving you energy and deterring crime when you are away from home

The timer allows you to set on and off times at 30 minute intervals for a total of 48 On/Off options that will cycle daily without having to reset

Lighting Control – Conveniently control and dim indoor lamps, lights and seasonal décor with this wireless remote and plug-in receiver featuring 1 polarized outlet – offers full range dimming when used with dimmable bulbs

Wireless Remote – The wireless remote provides ON/OFF and dimming operations up to 150ft. from receiver; 1 CR2032 battery is included to power remote

Wall Mount – The remote doubles as a wall-mounted switch (hardware included) or fits existing multi-gang locations (wall plate not included)

VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more.

VERSATILE DIMMING OPTIONS – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF, adjust lighting brightness and create schedules for a wide range of fixtures. The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the dimmer. Home automation is simple through custom scenes, versatile scheduling and convenient alerts.

3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.

Product 1: LED strip lights that work with Alexa and Google: Directly connect these LED lights to your Google Assistant or Amazon Alexa for voice control. These LED light strips with voice control will help you create your smart home

Product 1: Easy to install LED lights strip: These smart lights bend around corners and adhere to surfaces with removable tape, helping make your house a smart home. These smart LED light strips can be trimmed to your desired length and linked with extensions

Product 1: Manage your smart lights away from home: Get added home security and convenience by controlling your LED lights with the Cync App for iOS and Android, so you never come home to a dark house

WHY AN ADD-ON SWITCH – Add-on switches allow GE-branded in-wall smart controls to operate correctly in multi-switch configurations. By connecting directly to the smart device, the add-on mirrors its functions. This feature allows you to dim lights, adjust fan speeds, turn fixtures ON/OFF and more based on the capabilities of the primary smart device. While the add-on switch is not a stand-alone device, it provides continued use of your favorite smart-device functions from multiple locations.

ADVANCED DESIGN 2ND-GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous models and eliminated the need for breakoff tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.

ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations. The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch.

Upgrade your smart home: Compatible with Google Home and Alexa (sold separately), smart plugs from Cync make your traditional devices smart by providing voice and app control at all times, even when you are out of home.

Smart outlets make any electronic device smart: The Cync smart plug makes any lamp or electric device smart, so smart plugs and devices respond to voice commands as an entire smart home system.

Control smart plugs while away from home: Get added home security and convenience with the ability to control your electric devices away from home with these Wi-Fi outlets, so you never worry about leaving your iron on or coming home to a dark house.

Upgrade your smart home: Compatible with Google Home and Alexa (sold separately), smart plugs from C by GE make your traditional devices smart by providing voice and app control at all times, even when you are out of home.

Smart outlets make any electronic device smart: The C by GE smart plug makes any lamp or electric device smart, so smart plugs and devices respond to voice commands as an entire smart home system.

Control smart plugs while away from home: Get added home security and convenience with the ability to control your electric devices away from home with these Wi-Fi outlets, so you never worry about leaving your iron on or coming home to a dark house.

2 Pack: Automate a lamp, seasonal lights, or small appliances – saving you time, money and energy

Turns light source on/off at any desired times daily – 24-hour daily cycle

Programmable in 30-minute intervals with multiple daily settings

Stay Protected – No longer wonder if out-of-reach surge protectors have expired. With this single-outlet wall tap surge protector, an audible alarm will activate until it is unplugged from the wall.

Audible Alarm – The alarm reaches 88dB, so you can hear when the surge protector needs to be replaced.

Surge Protection – This 1,080 Joule surge protector tap offers protection against voltage spikes and has an electrical rating of 120VAC, 15A and 1,800W.

Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch; supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more; not compatible with smart lighting fixtures

Features an easy-to-use slider for full-range dimming; to turn the light OFF, move the slider all the way down until it clicks

Side dial allows for user-friendly fine-tuning controls; adjust the lowest dimming level to stop light bulbs from flickering

Automate lamps, seasonal lighting, or small appliances like portable fans – saving you time, money and energy!

Turns lighting on and off at different times daily (7-day programmable schedule) -up to 16 settings per day.

Features 1 polarized outlet and a convenient override switch to manually control the plugged in lamp or appliance.

"ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).

Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately).

The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day.

Works with Alexa for voice control (hub required, Alexa device and hub sold separately).

Easily replace any three-way switch configuration with the GE Jasco Z-Wave three-way dimmer kit to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway.

White lighting control matches most standard wall plates (wall plate not included)

Outdoor timer for security, landscape, patio or seasonal lighting – saves you time and money

Twist the dial on the timer to your setting of choice and that setting will repeat on a daily cycle

Multiple Settings include – Always On, Always Off, Countdown (2, 4, 6, or 8-hour options) or Automatic On at Dusk, Off at Dawn

Wirelessly schedule, control any permanently installed lighting from your smartphone or tablet

Multiple scheduling options, including: Seven-Day, Sunrise & Sunset, Random & Vacation and Custom Countdowns

Full-Range Immobility from 0% to 100%

Product 1: VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: Smart Things, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivian, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more

Product 1: ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups

Product 1: VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device

This is an O.E.M. Authorized part

Fits with various GE brand models

Oem part # WE4X794

This is an O.E.M. Authorized part

Fits with various GE brand models

Oem part # WD09X10023

Programmable in 30-Minute intervals

Decorative protective cover

Indoor use only

Accurate to the minute

Six on/off programs with battery backup

Indoor use only

Jasco Z-Wave Lighting Control. The primary ZW4001 switch and the auxiliary ZW2002 switch are both packaged separately in OEM white boxes. Jasco is a licensed manufacturer of GE brand products.

White lighting control matches most standard wall plates (wall plate not included)

Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes

Mechanical plug-in timer for indoor use

24-hour programmable, programmable in 30-minute intervals

1 polarized outlet

Easy To Set and Use!

On/Off Schedule for Every Day of the Week!

Polarized for Safety

This is an O.E.M. authorized part

Fits with various GE brand models

OEM Part # WD21X626

Product 1: Automate the shut off operations of all types of lights including LEDs, CFLs, fans and heaters at the time pre-set

Product 1: Six pre-set options: 1min, 5min, 10min, 15min, 20min or 30min; Simply push the button to set countdown time preference

Product 1: Replaces standard in wall light switches, fan switches or spring loaded timers for energy saving, convenience and lighting and fan control