Best 40 Water Pipe Fittings in 2026

INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors

VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination

LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines

SHARKBITE BRASS PUSH 90 DEGREE ELBOW: This push-to-connect fitting allows you to make a connection between two pieces of potable water pipes quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit 90-degree elbows work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push 90-degree elbow allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

LEAD FREE : Made with DZR Forged Brass, 1 Inch 90 degree Elbow Push x Push

QUICK INSTALLATION : No special tools, No soldering, No crimping or glue. Push to connect design provides an efficient application that saves time and money.

VERSATILITY: Pushlock plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination- even on wet lines!

LEAD FREE : Made with DZR Forged Brass size 1 Push x MIP

QUICK INSTALLATION : No special tools, No soldering, No crimping or glue. Push to connect design provides an efficient application that saves time and money.

VERSATILITY: Pushlock plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination- even on wet lines!

90-degree elbow for connecting hose to threaded pipe at an angle

Fitting connects to hose on one end and has an NPT male connector on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

90-degree elbow for connecting flexible polyethylene tubing to pipe at an angle

Barbed male insert on one end and male NPT threads on the other end for connecting flexible tubing to female NPT threaded pipe

PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal

【APPROVED TO USE】: SUNGATOR push pex fittings are Certified and listed to ASSE 1061, NSF/ANSI 61; SUNGATOR plumbing fittings meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with SUNGATOR push fittings and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR push pex plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

90-degree elbow for connecting flexible polyethylene tubing to pipe at an angle

Barbed male insert on one end and male NPT threads on the other end for connecting flexible tubing to female NPT threaded pipe

PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal

EZ-FLUID Plumbing Lead Free Copper 90 Degree Elbow C x C Copper Fittings

Copper 90 Degree Elbow Copper Fitting with Sweat X Sweat connection Works on Type M,L or K Copper Tubing

Copper Pipe Elbow Fittings Made of Lead Free Copper

【APPROVED TO USE】: Certified and listed to ASSE 1061, NSF/ANSI 61; Meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

90-degree elbow for connecting hose to threaded pipe at an angle Fitting connects to hose on one end and has an NPT male connector on

Fitting connects to 1/2" I.D. hose on one end and has an 1/4" NPT male connector on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Three piece construction - nut, sleeve and body.

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Lead-Free Brass: Commercial faucet installation kits are made of lead-free brass, can be used for drinking water, and are installed with tape to prevent leakage

Thread: The thread of the elbow adapter is G1/2 (1/2IPS), not NPT thread. Suitable for wall mounted commercial faucet with G1/2 female end for use in commercial kitchen prep & utility sink.

Easy to install: The longer end is used to connect to the back of a wall-mounted commercial faucet, and the shorter end is connected to the water supply pipe, secured by a lock nut, with stainless steel gasket and rubber gasket.

Three piece construction - nut, sleeve and body.

USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe.

Standard fittings use short nuts

90-degree elbow for connecting tubing to threaded pipe at an angle

Working Pressure: 2900psi / 20MPa;Temperature Range: -50-450℃ / -58℉ -842℉

Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation

TOP QUALITY: The water line barbed hose connector fittings are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability

MEASUREMENTS: 3/4 Inch Barbed Insert x 3/4 Inch FNPT thread. The Pipe Fitting Length is 2.94 inch. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max. pressure 280 psi @73 Degrees FHose Fitting Connection Type is Insert x FNPT

WIDE APPLICATION: PVC 90 degree elbow barb fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems

APPLICATION RANGE: 90 Degree Elbow (G1/2 Male to Female Thread), used to connect and branch two pipes. Commonly used in mechanical engineering, agricultural irrigation, power industry, household use, etc.

DURABLE DESIGN: Made of nickel-plated copper for corrosion and high-temperature resistance, suitable for gas/liquid/oil/vacuum pipelines.

FUNCTIONAL TOOLS: Good air tightness, pressure resistance, and not easy to fall off. A threaded connection could easy insertion or remove the trachea without the use of other tools.

【APPROVED TO USE】: Certified and listed to ASSE 1061, NSF/ANSI 61; Meet UPC, CUPC requirements. Lead Free brass are safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.