Best Yoebor Water Pipes in 2026

Hex bushing for connecting two pipes with different diameters

1/4" Male NPT threads on one end and 1/8" female NPT threads on the other for connecting pipes with different ends

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

PIPE Type: black pipe 1/2" x 1.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

🔧[ Product Type ] —— Barbed Hose Fitting(1/2"Hose Barb x 1/2"Female NPT) ,for industry connecting pipes or fittings with different end types, diameters, or materials.NPT thread size is not the actual diameter, it is only the nominal pipe size.

🔧[ Product Material ] —— High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel.

🔧[ Hose ​Clamp ] —— Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose.

★【Superior quality】:Made of high-quality PPSU material, lead free, no pollution, no metal, can drink directly without burden, friendly and healthy to the human environment.

★【 Extra Long Service Life 】:Lightweight and durable, with good chemical stability. Good performance in heat and water resistance, corrosion resistance, reverse osmosis, antifreeze damage, protection from mineral buildup, chlorination and other types of water.

★【 Easy Installation 】 : Features a barbed connection for full insertion of expansion fittings, leak free, cold connection. Compatible with any PEX brand manufactured to North American standards.★【 Easy Installation 】 : Features a barbed connection for full insertion of expansion fittings, leak free, cold connection. Compatible with any PEX brand manufactured to North American standards.

Easy to install on the pipe supply lines. Max. 600 PSI WOG (Water, Oil and Gas).

Inlet&Outlet: : PEX-F1807 side fits 1/2" PEX-a/b/c pipes, compatible with PEX F1807 stainless steel & copper crimp rings and stainless steel press sleeves . NOT compatible with PEX F1960 expansion plastic ring.

100% leaking test in the own factory, Max. working temperature: 80℃(176°F).

PIPE Type: black pipe 3/8" x 1.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

[PRODUCT PARAMETER]:3 LOOPS,Heat can be transmitted 30-45 square meters.1" NPT supply and return shut-off ball valves,SUS 304 stainless steel cold forming, corrosion resistance, no rust, better sealing, more precise control, the main tube is not demagnetized as a whole, longer life than demagnetization tubes, and higher hardness.

[VISUAL FLOW METER]:The water inlet branch is equipped with a visual flow meter type shut-off valve, which can accurately adjust the water flow of each channel and prevent the branch from grabbing water. Just open the red cap and turn the red base to adjust the water volume of each channel to 0-5 liters/min. Effectively ensure the hydraulic balance of each road.

[AUTO EXHAUST VALVE]:Automatic exhaust valve, in a continuous automatic manner, Eliminates the air inside when the system is filled with water and during operation.A hygroscopic vent cap prevents accidental drips.

PIPE Type: black pipe 1 1/2" x 2.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

PIPE Type: black pipe 1/4" x 1.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

❤ EASY TO CONNECT: The AG180-002 air gap comes with pipe support adapters for 1/2-inch or 3/4-inch PVC and copper pipe connection. Snap-in retainer provides a simple way to secure 1/2-inch pipes. For larger pipes, use a pipe support adapter and a stainless-steel worm clamp. For pipes to stay in place, ensure they are secured to a support structure within 12-24 inches from the air gap. An air gap is a non-pressurized device, and therefore very little pressure is exerted on the pipes.

❤ STANDPIPE / DRAIN CONNECTION: The AG180-002 installs directly onto a 2-inch standpipe or connects securely to a floor drain using a stainless hook. This air gap can be used with plastic or metal standpipes. If needed, it can be glued in place to a plastic standpipe using regular PVC adhesive. The air gap is designed to drain up to 36 gallons per minute safely. The optimum recommended flow rate is 18 gallons per minute.

❤ SPLASH PROTECTION: The AG180-002 uses a funnel design to assure a splash-free operation. During water softener operation, an initial discharge surge can create splashing. Funnel design and side splash guards eliminate the possibility of water splashing outside of the air gap. Make sure that P-trap is located minimum 12-inches from the top of the standpipe. This is needed to avoid water splashback from the P-trap and to create static water pressure for continuous water drainage.

CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Locknut Washer 1/2" has 0,5 inch Female Threads.

ENHANCED QUALITY BRASS Makes our Locknut Washer 1/2" Resistant to Corrosion and Safe for high temperatures

RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing. Easy to Install or Change. Doesn’t Leak!

PIPE Type: black pipe 1 1/4" x 1.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

【Thread Size】3/8" NPT Female. Note: 3/8" Thread is about 5/8" ID. Please check the product size diagram and select the size you need.

【Material】This pipe cap is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Our Pipe Cap 3/8" Female brass fittings don’t deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. Package include rubber gasket, it could provide strong seal without slipping.

【Excellent Threads】Female National Pipe Taper (NPT) threads for use with male threaded pipes. The pipe cap is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing. Easy to Install or Change (Thanks to the hexagonal head that increases the bearing surface when a wrench is applied to the fitting). Doesn’t Leak!

【Package Included】 50 pieces Plastic barb connectors in total, including 5pcs 5/32"x5/32", 5pcs 3/16"x3/16", 5pcs 7/32"x7/32", 5pcs 1/4"x1/4", 5pcs 5/16"x5/16", 5pcs 3/8"x3/8", 5pcs 7/16"x7/16", 5pcs 1/2"x1/2", 5pcs 5/8"x5/8", 5pcs 3/4"x3/4".Almost all sizes are included to meet different diameter pipes.

【Material】The 3/4"x3/4" barbed hose fittings are made of milky white PE (polyethylene) plastic, and the others are made of PP polypropylene plastic, they are durable, strong, water resistant, chemical-resistant materials to assure long life.

【Working Temperature & Pressure】 1. Translucent PP (polypropylene) temperature range: -22 °F to 284 °F. It is resistant to corrosion by acid, alkali, salt solution and various organic solvents below 176 °F, and can be decomposed under high temperature and oxidation. The melting point is 329 °F, and it softens at about 311 °F. 2. Milky white PE (polyethylene) temperature range: -76 °F to 197.6 °F. Melting point is 233.6°F.

Insert connects two pipes or tubing in a straight run

Fitting connects to tubing on both ends

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

PIPE Type: black pipe 1" x 1.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

PIPE Type: black pipe 1" x 2.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

[SIZE] - Fit Pipe OD(Approx.): 32mm/1.26"; Hole In Base Diameter: 5mm/0.2"; Overall Size (Approx.): 46 x 39 x 19mm / 1.8-inch x 1.5-inch x 0.8-inch (L*W*T); Screw Size: M4x15mm.

[APPLICATION] - It is widely used in the laying and installation of water pipes, hoses, oil pipes, PEX pipes, PVC pipes, etc.

[USAGE] - Draw a line at the installation position in advance, mark the position of the pipe clamp, and lock the fixed pipe clamp with a screw through the plastic pipe clamp.

Hex bushing for connecting two pipes or with different diameters

1/2" Male National Pipe Taper (NPT) threads on one end and 3/8" female NPT threads on the other for connecting pipes with different ends

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

HVAC & Refrigeration tubing is measured by the outside diameter or O.D. of the pipe/tube. See description below for more details. Ideal for Potable Water, Air Conditioning, and Refrigeration Systems (both Residential and Commercial Systems – Suitable for Aboveground Piping

Connects 2 copper pipes to diverge flow to a different direction – 581 PSI Maximum Working Pressure

Lead-Free, Durable, & Low-Maintenance, NO CORROSION