Best Confast Wedge Anchors in 2026

➤Made of carbon steel, heavy duty, durable.

➤Diameter of anchor: 3/8 inch.

➤Length of the anchor: 3 inches.

Wedge anchor diameter: 3/8" | Length: 3" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust

Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 3/8" drill bit to drill a hole in the base material (Concrete only)

The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 20 ft/lbs.

➤Made of stainless steel 304, heavy duty, durable and corrosion resistance.

➤Diameter of anchor: 1/2 inch.

➤Length of the anchor: 3-3/4 inches.

Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete

Suitable base materials are normal-weight, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry

Common applications include structural connections such as beam and column anchorage

ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout.

LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt.

LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications.

Size: 1/2 inch Diameter & 3-1/2 inches length

Material: Made of carbon steel & zinc plated surface for corrosion resistant

Feature: These wedge anchors are used on concrete or cement surfaces to secure metal objects

<b>Material:</b> Our Wedge Anchors Are Made Of High Quality Carbon Steel And Are Galvanized To Make The Wedge Anchors Much More Resistant To Rust.

<b>Use:</b> Wedge Anchors Are Ideal For Attaching Items To Concrete, Sloped Buildings Or Metal Plates, Steel And Wood.

<b>Product:</b> Each Wedge Anchor Has A Nut And Washer Already Placed On It For Your Convenience And Ease Of Use.

Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.

Wedge anchors can be used to fasten objects to concrete.

These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.

【High Quality Stainless Steel Wedge Anchor】: The concrete wedge anchor is made of Premium stainless steel, anti-rust, can hold seawater and humid environments.

【Size of Carbon Steel Wedge Anchor】: Diameter of the anchor: 3/8 inch| Length of the anchor: 3 inches| Quantity: 5 pcs.

【Corrosion Resistant – Stainless】: Stainless steel concrete anchor is durable and long lasting that it makes them the perfect choice for use in any environment (including marine).

Ideal for fastening into concrete

Fully threaded design accommodates various fixture thicknesses

Great for attaching structural supports to concrete, tilt-up construction, highway rails and posts, electrical, HVAC, plumbing systems, as well as metal doors and window frames

💯 What You Get ------ In this kit, You will get 6Pcs Zinc Plated Heavy Duty Wedge Anchor Kit, Including 6Pcs 3/4" x 6" Wedge Anchors. Intotal 6Pcs can meet all your daily needs. Used these to anchor down, Drilled hole, tapped it in, and it tightened down perfect, nice and tight!! The wedge anchor is a torque-controlled, wedge expansion anchor.

💯 Product Sizes Details ------- Wedge Anchor Diameter Sizes: 3/4" ; Length: 6" . Qty: 6 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust. Work great. You only need to drill a quarter inch hole. Please check the size before buying! PACKAGED WITH NUTS AND WASHERS!!!

💯 Wide Range of Sizes ------- In addition to the kit, we also prepare Wedge Anchors in a variety of single sizes for you, you can click on the size displayed in our listing to select the anchor that suits your project one by one. Insures proper fastener for best results, Fast, quick, complete installation.

Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.

Wedge anchors can be used to fasten objects to concrete.

These anchors can be used for some of the following concrete applications: shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc.

TAMPER-PROOF APPLICATIONS - Mushroom head anchors once installed, difficult to remove

EASY INSTALLATION - Pre-expanded anchor design allows for easy installation

ZINC PLATED - Helps prevent rust in dry environments

SPEC: Diameter: 1/2" | Length: 4-1/2" | Thread Type: Coarse (standard) | Thread Length: 2-3/8" | Drill Bit Size: 1/2" | Quantity: 25 Pieces | Material: Zinc plated Carbon Steel | Torque: 40 ft/lbs | Design: Chamfered top design to avoid mushrooming

CORROSION RESISTANCE: Conquest Fasteners' heavy-duty concrete anchor bolts are mechanical concrete anchors used for dry interior applications. The zinc plating prevents rust from forming and is a great versatile solution for anchoring a variety of projects

APPLICATION: Conquest Fasteners' wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures

[DIMENSIONS] Diameter: 3/4" | Length: 7" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 10 Pieces | Material: Zinc plated Carbon Steel | Torque 110 ft/lbs | Design: Chamfered top design to avoid mushrooming

CORROSION RESISTANCE: Conquest Fasteners' heavy-duty concrete anchor bolts are mechanical concrete anchors used for dry interior applications. The zinc plating prevents rust from forming and is a great versatile solution for anchoring a variety of projects

APPLICATION: Conquest Fasteners' wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures

[DIMENSIONS] Diameter: 5/8" | Length: 6" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 25 Pieces | Material: 18-8 (Type 304) Stainless Steel

[CORROSION RESISTANT] 100% 18-8 (Type 304) Stainless Steel provides the highest form of corrosion resistance. Ideal for outdoor or non-chloride environments

[APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures