Best Micrl Winch Quick Connect Systems in 2026

WIRE CONNECTOR PACK---This handy electrical wire connection set from Orion Motor Tech includes 4 clearly marked quick connect plugs that let you patch and disconnect 2, 3, or 4 gauge (0.2"-0.25") wire pathways from 12V, 24V, or 36V batteries, supporting currents up to 175 amps

WIDE APPLICATION---Our versatile weatherproof QC plugs offer a simple, convenient way to handle direct power connections to car batteries; truck, ATV, and RV winches, lifts, and cranes; and trolling and outboard motors on boats and watercraft, as well as home and industrial applications like lathes, chargers, and power inverters

BUILT TO LAST---Each wire harness's unibody polycarbonate housing provides superior resistance to wear, corrosion, water, and heat for its full service life of over 10,000 connections; the 8 copper terminal pins are silver plated to minimize resistance and maximize stability and dependability; and the attached boot caps keep debris out between uses

[Easy to install] Screw the ring lug cable onto the battery and plug through its interface into a charger, DC socket etc.

[Multi-Purpose] Provide a best and easiest way to keep battery charged on Car/Motorcycle/Tractor/Riding Mower/other outdoor vehicle equipments.

[More Convenient] No worry about the troublesome to unscrew the cable from the bits and pieces of your vehicles equipments. And the versatility makes it convenient to draw power from the battery or charge for it.

Fits 2-4 Gauge wire; Voltage: 12-36 volts; Capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.

Package include: 2x Polycarbonate cover; 2x Hard Plastic Boot caps; 4x terminal pins. Diameter of the terminal pins: 1/4" / 6.55mm Connector: 3-1/8" x 2-1/8" x 1"; Connected set: 5-1/4" x 2-1/8" x 1".

Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.

☑【UNIVERSAL】Heavy-duty & multipurpose universal battery quick connector set from Driver Recovery Products. Provides simple and convenient method for connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current, quick-disconnect connector.

☑【DURABLE】Combined shell made from sturdy PC fire-retardant materials, allowing for over 10,000 connect/disconnect actions. With fitted rubber boot covers, protect against dust, moisture and corrosi

☑【SAFE】Both ends are suitable for connection to the power or load side because of its identical connectors.The ends are made to connect only one way, making it impossible to connect the wrong polarities to one another,preventing accidental reverse polarity when hooking up a charger.

Widely used in connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current.

Material: PC fire-retardant materials+stainless steel.Rated currents (amperes): 175 A.Rated Voltage: 600 V.Suitable for 1-2 Gauge.

Connector Handle Makes disconnecting of connectors quick, easy and safe.

✅Simple Installation - Fits 1/0 Awg cable; Capacity 175 Amp. Just put the cable in terminal (DIA: 0.433 inch), solder or crimp them, then slide them into the back of plug and lock in place

✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment

✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current

4 x 50 Amp Battery Connector plugs (Interconnecting halves),8 x Copper terminals Silver plated,depending on your size choice (number of terminals supplied, will always be double the number of housings as there are two terminals required per housing.)

Ratings: 50 amps, 600 Volts Maximum.Complete with terminals suitable for cables up from 6mm² (10AWG) to 16mm² (6 AWG) (depending on your terminal choice of size).

Silver plated contacts - offers greater longevity when using high power, elevated temperature applications.Terminals can either be crimped or soldered to the cables.

Universal: Allows quick connect and disconnect for winches, trailer wiring or other electrical devices

Current rating: For high-current use; true rated capacity 175 amps

Voltage: Designed for low-Voltage (12-36 volts DC) use

Fits 2-4 Gauge wire; Voltage: 12-36 volts; Capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. If the product you recently received is a two-piece package, please contact us and we will replace it immediately.

Package include: 4x Polycarbonate cover; 4x Hard Plastic Boot caps; 8x terminal pins. Diameter of the terminal pins: 1/4" / 6.55mm Connector: 3-1/8" x 2-1/8" x 1"; Connected set: 5-1/4" x 2-1/8" x 1".

Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.

✅Easily Install - Fit 2 AWG cable with a capacity of 175 amps! Simply place the cable in the terminal (DIA: 0.327 inch), crimp or solder it, then slide into the back of the plug and lock in place.

✅High Durability - The shell of the battery quick connector is made of PC materials, making it reliable and durable with perfect continuity and fire-retardant in bad environments.

✅High Conductivity - The terminals are made of silver-plated copper for maximum conductivity, providing stable voltage and current.

Broad Compatibility- The quick connect/disconnect wire connector fits 6-12 Guage/3.3-13.3mm²; Voltage 12 V-36 V; Capacity 50 Amp

Super Easy to Use- Put the battery cable into terminal pins then solder or crimp them. Slide battery disconnect into the back of plug and lock them in place

Strong Electrical Conductivity- One battery connector comes with 2 pins. They're made from red copper coated with silver, which offers high conductivity and produces less heat

Wide range of applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector

Size information: voltage: 12-36 volts DC; capacity: 50 Amps; package comes with 6 sets 2-4 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement

Quality and durable material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time

✅Simple Installation - Fits 6-8 awg cable; Voltage 600V; Capacity 50 Amps. Just put the cable in terminal (DIA: 0.22 inch), solder or crimp them, then slide them into the back of plug and lock in place

✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment

✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current

✅𝐒𝐢𝐦𝐩𝐥𝐞 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧 - Fits 6-8 Awg Cable; Voltage 600V; Capacity 50Apm. Just put the cable in terminal (DIA: 0.21 inch), solder or crimp them, then slide them into the back of plug and lock in place

✅𝐏𝐂 𝐇𝐨𝐮𝐬𝐢𝐧𝐠 - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment

✅𝐇𝐢𝐠𝐡 𝐂𝐨𝐧𝐝𝐮𝐜𝐭𝐢𝐯𝐢𝐭𝐲 - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current

One pair Quick Connect plugs for 2-4 gauge cable

Allows convenient connection and disconnection to the battery power source

175 amp capacity

Suitable for: the battery quick connector provides simple and convenient method for connect or disconnect power to a winch or other electrical device such as remote battery connectors, power inverter, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector

What you receive: the package comes with 12 sets 6-10 gauge battery quick connectors, including 12 pieces connectors, 24 pieces terminal pins and 12 pieces caps, enough quantity to meet your different needs or replacement

Durable to use: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, durable and reliable to use, not easy to break, have long service time

Anderson Powerpole Connectors ( Made in USA )

Connector Housing, Amp Rating: 120A

Heavy Duty Contact Amp Rating: 50A, 600V

The quick connect plug is suitable for electric vehicle, UPS communication power supply, electric machine, electric forklift, the power equipment, etc

Fits 1/0AWG wire; Voltage: 600V ; For high-current use; true rated capacity 175 amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices

Connector Dimension: 3.1"x2"x1"(inch) ; Material: Plastic, Copper plated silver

Wide applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector

Specifications: voltage: 12-36 Volts DC; capacity: 50 Amps; Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement

Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time

Fits 2-4 Gauge wire; Capacity: 175A; Voltage: 12~36V, with standing max voltage: 600V.

Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers, tourism bus, electric forklift and other electrical devices.

Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.

【Self Securing Design】 Stainless steel springs create a robust force between the contracts that holds the connector in the mated condition, but allows it to be quickly disconnected.

【Low Resistance Connection】Silver plated copper contacts provide the lowest electrical resistance.Lower resistance means more power, less heat, and greater performance.

【Connection Versatility】Contacts for wire, PCB, or busbar all fit into the same housings

Premium Material: These battery quick connectors are made of PC Fire-retardant plastic. Use these for various connections to external fuel tank, dump trailers, and any other connection needed to supply power from the truck to equipment.

Fits 6-10 gauge wire; Diameter of the terminal pins: 0.27"; Capacity: 50 Amps;

Safe and Effective: Has strong conductivity and provide a secure connection between the panels and the solar controller.

175A battery quick disconnect connector plug kit, provides simple and convenient method for disconnecting power to a winch or other electrical device.

Rated voltage: 600V(Max); Current rating: 175A(Max).

Connector size: 78x50x25mm/3.07*1.97*0.98in, accept 2-4 gauge wire. Terminal pins inner diameter: 0.43in.

2 x 350Amp 2-pole Housing Battery Connector plugs (Interconnecting halves),4x Copper terminals Silver plated,2 x Handle,2 x Cover Dust.

Current: 350 amps.Voltage: 600 Volts (Max).Multiple Wire Sizes, AWG #2.Suitable for Cable size up to 70 mm².Light and durable polycarbonate housing.Silver plated Copper terminals.

Silver plated contacts - offers greater longevity when using high power, elevated temperature applications.Operating temperature: -20C to 105C.Terminals can either be crimped or soldered to the cables.

2 x 175 Amp 2-pole Housing Battery Connector plugs (Interconnecting halves),4x Copper terminals Silver plated,2 x Handle,2 x Cover Dust.

Current: 175 amps.Voltage: 600 Volts (Max).Multiple Wire Sizes, AWG #4, #2, #1.Light and durable polycarbonate housing.Silver plated Copper terminals.

Silver plated contacts - offers greater longevity when using high power, elevated temperature applications.Operating temperature: -20C to 105C.

Ratings: 175 amps, 600 Volts Maximum.Connector size is approx. 3.15"x2.13"x0.98"(LxWxH),light and durable polycarbonate housing.

Silver plated contacts - offers greater longevity when using high power, elevated temperature applications.Terminals can either be crimped or soldered to the cables.

Mechanically keyed housings - (Interlocking pairs) prevents accidental component mating (each connector slots into the other - there is no male and female version)

Complete set: 1 Pair (2 connector ends, 4 terminal pins, )

Capacity: 350 Amps Rating

Gauge: 2/0awg

Complete : 1 handle with screws

Dimension: 5inch Length,4.5inch Width

Makes disconnecting of connectors quick, easy and safe.

Product Type :Auto Accessory

Package Dimensions :11.684 Cm L X8.382 Cm W X4.572 Cm H

Country Of Origin :China

✅Simple Installation - Fits 2/0 Awg cable; Capacity 350 Amp. Just put the cable in terminal (DIA: 0.496 inch), solder or crimp them, then slide them into the back of plug and lock in place

✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment

✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current