Best Muyi in 2026

10 AWG thick red pigtail wire allow you to splice it into any project.

Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm

Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in.

Pre-assembly with RV wire, 18AWG with 10cm pigtail.

Package contains 5pcs male connectors & 5pcs female connectors.

5 position rectangular black housing connector (hole dia: 0.24").

Pre-assembly with RV wire, 18AWG with 10cm pigtail.

Package contains 5pcs male connectors & 5pcs female connectors.

2 position rectangular black housing connector (hole dia: 0.24").

20-14 AWG male & female waterproof connectors.

Operating temperature : -10℃~+80℃.

2 position rectangular black housing connector (hole dia: 0.24").

High-performing polypropylene insulated and flame retardant material ensures there are no shorts, making it ideal for complex circuits when used for parallel splicing or a tap wire.

Blue connectors let you organize installations and correctly identify wire sizes (0.75-2.5mm²) with max. current 15A.

Makes it simple to connect a tap wire to a run (through) wire electrically via a self-sealing and self-stripping design.

20-16 AWG male & female waterproof connectors.

Operating temperature : -10℃~+80℃.

Easy to install under soldering and crimping.

Its design lets you use it with 22 to 18 AWG solid or stranded wire for taps or 18 to 14 AWG stranded for runs.

Red connectors let you organize installations and correctly identify wire sizes (0.5-1.0mm²) with max. current 10A.

Makes it simple to connect a tap wire to a run (through) wire electrically via a self-sealing and self-stripping design.

Fits 2-4 Gauge wire; Capacity: 175A; Voltage: 12~36V, with standing max voltage: 600V.

Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers, tourism bus, electric forklift and other electrical devices.

Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.

Material: PTFE (Polytetrafluoroethylene).

Outside Diameter: 4mm, Inside Diameter: 2mm, Length: 10 Meters

Temperature range: -190℃-280℃.

Nylon H11/H8 lamp connector, fit for Headlight, Fog light.

Male and female connector included, Wire range: 16 Gauge, Total length: 25cm

Temperature for heat-resistance:125℃/257℉, Voltage:12V--24V, Max Current: 10A.

20-16 AWG male & female waterproof connectors.

Operating temperature : -10℃~+80℃.

Easy to install under soldering and crimping.

Package include - 4 pcs 60mm air filters (2.36 inches)

Size - Inlet Diameter: 2.36 inches; Overall Height: approx. 3.5 inches; Outside Diameter At Top: approx. 2 inches; Outside Diameter At Base: approx. 3 inches

Material - Double-layer steel mesh filter mushroom head

Package include - 4 pcs 52mm air filters (2.05 inches)

Size - Inlet Diameter: 2.05 inches; Overall Height: approx. 3.5 inches; Outside Diameter At Top: approx. 2 inches; Outside Diameter At Base: approx. 3 inches

Material - Double-layer steel mesh filter mushroom head

20-16 AWG male & female waterproof connectors.

Operating temperature : -10℃~+80℃.

Easy to install under soldering and crimping.

20-16 AWG male & female waterproof connectors.

Operating temperature : -10℃~+80℃.

Easy to install under soldering and crimping.

20-16 AWG 1.5mm Series male & female waterproof connectors.

Per plastic storage box contain 1/2/3/4/5/6 pin way electrical connectors kit.

Each box comes with 10x 1 pin male/female plugs; 10x 2 pin male/female plugs; 5x 3 pin male/female plugs; 5x 4 pin male/female plugs; 5x 5 pin male/female plugs; 5x 6 Pin male/female plugs; 150pcs tab; 150pcs socket; 300pcs wire seal; 3x molex pin extractor.

【Wire Range】Fits 6/8/10/12 Gauge wire; Capacity: 50A, max current: 60A; Voltage: 12~36V, withstanding max voltage: 600V.

【Product Features】Connector dimension（LxWxH）: 1.89" x 1.44" x 0.63" ; Connected set dimension（LxWxH）: 3.2" x 1.44" x 0.63".

【High-quality Material】Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers, tourism bus, electric forklift and other electrical devices.

12 AWG thick tinned-copper wire allow you to splice it into any project.

Wire length: 30cm/11.8inch wire loop, Fuse holder dimension: 41x35x15mm.

Inline Fuse Holder for standard blade fuses, Suitable for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, ideal for car truck trailer atv boat marine.

Easy Identification - Color Coded

Seven most common fuses - 5, 7.5, 10, 15, 20, 25, 30 AMP

Fuse Puler Included

Easy Identification - Color Coded

Seven most common fuses - 5, 7.5, 10, 15, 20, 25, 30 AMP

Fuse Puler Included

【High cost-effective fuse kit】-- The kit includes 120pcs micro size fuses and a fuse puller. The car fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/40A).

【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A/ 25A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.

【High quality, easy to identify】-- The fuse is made of environmentally friendly plastic and zinc alloy. The fuse of each current specification is distinguished by different colors, and the current specification number is marked on the top of each fuse, which is easy to identify.

【High cost-effective fuse kit】-- The kit includes 60pcs standard size fuses and a fuse puller. The car fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/40A).

【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A/ 25A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.

【High quality, easy to identify】-- The fuse is made of environmentally friendly plastic and zinc alloy. The fuse of each current specification is distinguished by different colors, and the current specification number is marked on the top of each fuse, which is easy to identify.

【High cost-effective fuse kit】-- The kit includes mini size 182pcs and standard size 98pcs. Two styles of fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A / 30A/ 35A/40A), equipped with a fuse puller.

【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A/ 25A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.

【High quality, easy to identify】-- The fuse is made of environmentally friendly plastic and zinc alloy. The fuse of each current specification is distinguished by different colors, and the current specification number is marked on the top of each fuse, which is easy to identify.

【High cost-effective fuse kit】-- The kit includes micro size 50pcs, mini size 160pcs and standard size 90pcs. Three styles of fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A / 30A/ 35A/40A), equipped with a fuse puller.

【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A/ 25A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.

【Abundant types and precise protection】-- Three different types of fuses are suitable for most vehicles and meet the different needs of consumers. It is recommended that you use the original car fuse to compare with our fuse size or search the car fuse type on the Internet.

【High cost-effective fuse kit】-- The kit includes 30pcs mini size fuses. The car fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/40A).

【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.

【High quality, easy to identify】-- The fuse is made of environmentally friendly plastic and zinc alloy. The fuse of each current specification is distinguished by different colors, and the current specification number is marked on the top of each fuse, which is easy to identify.

【High cost-effective fuse kit】-- The kit includes 160pcs mini size fuses and a fuse puller. The car fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/40A).

【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A/ 25A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.

【High quality, easy to identify】-- The fuse is made of environmentally friendly plastic and zinc alloy. The fuse of each current specification is distinguished by different colors, and the current specification number is marked on the top of each fuse, which is easy to identify.

Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits

Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer

Positive distribution bus with #10-32 stud

Blue Sea Systems Fuse Block ST Blade Compact 4 Circuit with Cover, part number 5045, is a common source fuse block that provides surface mount circuit protection for ATO/ATC fuses in a compact footprint

Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 Screw (M4), Recommended stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer, terminal stud size: #10-32

Single side design allows wire entry from one side to maximize space

Covers 30 commonly used blade fuses: 100pcs ATO/ATC/ATS/APR Standard Fuses: 2A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (10PCS of each model ), 120pcs ATM Mini Fuses: 2A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (12PCS of each model ), 120pcs Low Profile Mini Fuses: 2A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (12PCS of each model ).

The fuses are (industry) color coded and well organized, with a helpful photographic diagram of the fuses locations on the back of the cover.

This set comes with Standard & Mini & Low Profile Mini blade fuses. Good assortment of fuse with,variety of sizes that are commonly used in most of vehicles (Cars, Truck, SUV, ATV, UTV, Camper RV, Motorcycles, etc), making this assortment a universal fit for most any job.

ATTENTION - These "Low Profile" Micro/Small/Minor type of fuses are ‘Not Regular/Standard’ & ‘Not Maxi’ & ‘Not Mini’. DO NOT work in normal applications for mini fuses. MuHize."Low Profile" fuses assortment box contains 140PCS commonly used blade fuses type and one fuse clamp. LP-Mini 140PCS: 2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A - 14PCS of Each.

GREAT PROTECTION - Terminals are constructed from tin-plated zinc for corrosion resistance and enhanced conductivity. MuHize fuses made of premium materials, fast and precise fusing current to protect your vehicles and electrical devices from a short circuit and overload.

WIDELY USE - MuHize assorted fuses are specifically designed for Cars, Trucks, SUVs, Vehicles, ATVs, UTVs, Camper RV, Motorcycles, Fleet, Golf Car, Boat, Snowmobiles, and most general DC applications etc, covering such components as radio, light, turn signals, etc.