Best Cotton Work Utility Safety Clothing in 2026

12-Ounce, 100% ring-spun cotton duck

Nylon lining quilted to 80g 3M Thinsulate insulation in body, sleeves, and hood

Attached hood with low profile adjustment at hood hem

Muscle Back Technology Allows extended range of motion with upper-body flex and reduced arm binding Brushed 10-ounce, 100% cotton Super Duck material Two degrees thicker and tougher than industry standard

Diamond-quilt, four-ounce insulation Poly fill traps thermal warmth without overheating on warmer days Double knee with waterproof patch protection Adds resistance when getting down in the dirt, muck and mud

Pass-thru hand warmer pockets allow interior access Reach inside to grab phones, notepads or other items Zippered chest, interior patch and side zip pockets Stow the things you need at hand securely

Muscle Back Technology Allows extended range of motion with upper-body flex and reduced arm binding Brushed 10-ounce, 100% cotton Super Duck material Two degrees thicker and tougher than industry standard

Diamond-quilt, four-ounce insulation Poly fill traps thermal warmth without overheating on warmer days Double knee with waterproof patch protection Adds resistance when getting down in the dirt, muck and mud

Pass-thru hand warmer pockets allow interior access Reach inside to grab phones, notepads or other items Zippered chest, interior patch and side zip pockets Stow the things you need at hand securely

SELF-EXTINGUISHING FLAME RESISTANT PANTS tested in accordance with test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 for momentary contact with open flame

WATERPROOF, WINDPROOF, INSULATED BIB OVERALLS for men and women doing foul weather work as deckhands, dock workers, and freezer workers, utilizing innovative technology to protect from fire and weather

HIGH VISIBILITY RAIN GEAR fully CSA Z96-15 Class 1-Level 2 compliant and ANSI/ISEA 107-2015 Type O-Class 1 compliant, with Vi-brance material in contrasting tape; meets WCB/Worksafe/DOT configuration

FLAME RESISTANT, SELF EXTINGUISHING safety jackets tested in accordance with test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 for momentary contact with open flame

FULLY WATERPROOF utilizing innovative technology that gives this FR compliant hi vis jacket the very best thermal layer protection against wind and weather for outdoor work

HIGH VISIBILITY JACKETS FOR MEN with on-site hi vis requirements, fully CSA Z96-15 Class 1-Level 2 compliant and ANSI/ISEA 107-2015 Type O-Class 1 compliant, reflective chest straps and Vi-brance material in contrasting tape to ensure the highest standards; meets WCB/Worksafe/DOT configuration

Waterproof and breathable shell fully seam sealed Dupont dot laminated taffeta; polyurethane abrasion panels at shoulders to provide grip for backpack straps

High Vis upper and reflective tape/piping placement. ANSI/ISEA 107-2010 standards

Water resistant exposed zippered Radio pocket at left chest; mic loops; right chest loop patch panel for ID patch; back zipper access for imprinting details

WATERPROOF DESIGN Impertech fabric protects against rain and dirt during work, hunting, fishing, or sailing.

DURABLE POLYESTER/POLYURETHANE STRETCH FABRIC ensures high mobility and ease of movement for extreme work conditions and activities.

COMFORTABLE ACTIVE FIT with adjustable heavy-duty suspenders, knee-length boot zippers, internal Velcro pockets, soft knit backing, layered, breathable fabric, and high front/low back for ventilation all ensure maximum comfort.

Sewn to Military Specification FNS/PD 96-17 (MIL-C-8314A)

Every color except Black is NIR compliant.

Men's Standard

PRODUCT USES: Winning features of this durable coverall include, two chest pockets, one rule pocket and a concealed stud front. Perfect for all your working requirements.

DESIGN AND FUNCTIONALITY: Lightweight and comfortable. 6 pockets for ample storage. Rule pocket. Back patch pocket. Elasticated back waist for a secure fit. Concealed stud front for easy access. Available in sizes from XS to 6XL. New colour.

MATERIALS: Kingsmill: 65% Polyester, 35% Cotton. Shell Composition: 65% Polyester, 35% Cotton. Portwest products are manufactured to the highest standards with quality materials to ensure durability, comfort, and style.

Sizing: Do Not select your size according to your standard pant size. Measure both your chest (across its widest point) and your waist (at your belly button). Take the larger of these 2 measurements and select the corresponding coverall size from the size chart provided with product images.

ENHANCED VISIBILITY. BE SEEN. STAY SAFE. These Coveralls feature a 2 1/2-Inch yellow and silver trim down both arms, around the waist, across the back, and around the thighs.

ACTION-BACK PLEATS offer additional room across the back for easy movement and range of motion. Features CHEST POCKETS to keep what you need close by.

MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon blended twill fabric. Fabric weight is 7 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability.

DESIGN & SIZING: Full sleeve with cuffs. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left upper arm. Side vents for inner access. Pen slot on left breast pocket. Elastic on each side of waist for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image

COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system

MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon blended twill fabric. Fabric weight is 7 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability.

DESIGN & SIZING: Full sleeve with cuffs. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left upper arm. Side vents for inner access. Pen slot on left breast pocket. Elastic on each side of waist for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image

COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system

MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon blended twill fabric. Fabric weight is 7 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability.

DESIGN & SIZING: Full sleeve with cuffs. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left upper arm. Side vents for inner access. Pen slot on left breast pocket. Elastic on each side of waist for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image

COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system

MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon blended twill fabric. Fabric weight is 7 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability.

DESIGN & SIZING: Full sleeve with cuffs. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left upper arm. Side vents for inner access. Pen slot on left breast pocket. Elastic on each side of waist for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image

COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system

Kleenguard* A40 Liquid & Particle Protection Coveralls

These coveralls are made of breathable, microporous film to keep out debris, non-hazardous liquid chemicals and dry particulates, which gives your employees a better liquid barrier and a better particulate barrier than Dupont Tyvek

These coveralls pass NFPA 99 for antistatic for materials, pass ASTM F1670 testing for penetration of blood and bodily fluids, and meet the ANSI/ISEA 101-1996 sizing standards.

.35mm PVC on polyester material with heat sealed seams provides waterproof protection

Bright lime color and 2” reflective tape on jacket and pants provides superior visibility in day and night conditions

Jacket features vented cape back and armpits for improved airflow and comfort

This Snowsuit is made according to IDF standards for the Israeli army.

It has a two sided Zipper and is made of a water-resistant cloth ,synthetic fur and is filled with hollow synthetic fibers

The snowsuit retains body temperature in extreme cold weather and is especially designed for snowstorm and cold strong winds

FULLY WATERPROOF COVERALLS FOR MEN made with tough weatherproof fabric protects against rain, snow, fog, and ground humidity during work, hunting, fishing, or sailing.

DURABLE PVC-COATED POLYSTER FABRIC protects from the harshest elements and ensures high mobility and ease of movement for extreme work conditions and activities.

ENVIRONMENTALLY CONSCIOUS phthalate-free fabrics means low environmental impact while ensuring dryness in all weather conditions.

Meets and exceeds NFPA 70E PPE Category 4 standards and has an ATPV rating of 41 cal/cm2.

Arc flash suit set comes equipped with a flame resistant treated cotton hood and coverall. The hood includes a True Color Grey shield for maximum color acuity.

Color Khaki

The models in the picture are wearing: Man Height: 5’10" Weight: 169lb- Size: L / Woman Height: 5’8" Weight: 123.48 Size: S

This Snowsuit is made according to IDF standards for the Israeli army And the rescue services

This Snowsuit made of a water-resistant Nylon polyamide fabric

FULLY WATERPROOF MEN’S OVERALLS made from weatherproof fabric protects against rain, snow, fog, and ground humidity while working, hunting, fishing, or sailing.

HIGH-VISIBILITY BIB rated EN ISO 20471 Class 2 and EN 343 Class 3 along with 3M reflectives ensure these waterproof bibs meet the highest international standards for high visibility clothing (hi vis bib).

HIGH-VISIBILITY BIB rated EN ISO 20471 Class 2 and EN 343 Class 3 along with 3M reflectives ensure this gear meets the highest international standards for high visibility clothing (hi vis bib).

FULLY WATERPROOF COVERALLS FOR MEN made with tough weatherproof fabric protects against rain, snow, fog, and ground humidity during work, hunting, fishing, or sailing.

DURABLE PVC-COATED POLYSTER FABRIC protects from the harshest elements and ensures high mobility and ease of movement for extreme work conditions and activities.

ENVIRONMENTALLY CONSCIOUS phthalate-free fabrics means low environmental impact while ensuring dryness in all weather conditions.