Best Actron in 2026

2-5/8" black dial face with 250 degree sweep and black bezel with mounting hardware

0-8000 RPM range, driven by Air Core motor

Adjustable redline pointer

Actron's CP7529 Digital Timing Light features microprocessor-controlled circuitry and is loaded with advanced features including a bright LED display, mode indicator lights, and Xenon flashlight

Use to measure engine RPM and advance, and set initial timing, check and measure centrifugal advance, and measure vacuum advance

Works on gasoline powered vehicles equipped with conventional, electronic, computer controlled, DIS, or 2-cycle ignition systems

This Fuel Pressure Tester is designed for fuel injected systems

Measures the available fuel pressure with engine running on or off

Features 6-ft hose to aid reaching any test point

Standard 2" black dial for a 2-1/16" opening

60-0-60 Amp scale with a 60 degree sweep

Features a black bezel with removable black mounting panel

Actron's CP7803 Vacuum and Fuel Pressure Tester Kit is a great way to fine tune carburetion and timing for peak performance and maximum fuel economy

Use to test fuel pump pressure, mechanical condition of the engine, vacuum control system function, and much more

Use to find: intake manifold leaks, blown manifold and head gaskets, worn piston rings, burned valves, and leaking vacuum lines on conventional and computer-controlled vehicles

3-3/8" black dial face with 250 degree sweep and chrome bezel with mounting hardware

0-8000 RPM range, driven by Air Core motor

Adjustable redline pointer

Standard 2" black dial for 2-1/16" openings

0-100 PSI range with 270 degree sweep

Features a black bezel with removable black mounting panel

Standard 2" black dial for 2-1/16" openings

100-250 degrees Fahrenheit

Features a black bezel with removable black mounting panel

Standard 2" black dial for a 2-1/16" opening

100-280 degrees Fahrenheit

Features a black bezel with removable black mounting panel

Actron's Professional Compression Tester Kit detects worn piston rings, burnt valves, and blown head gaskets on most foreign and domestic vehicles, small engines, motorcycles, snowmobiles, and ATVs

Convenient push-button side release valve allows repeated testing without the need to disconnect between tests

Gauge features a 2-1/2 inch diameter, easy-to-read white face with standard and metric scales: 0-300 PSI and 0-2100 kPa, accurate Bourdon Tube movement, and heavy-duty rubber boot

Standard 2" black dial face for 2-1/16" openings

0-30 in. Hg Vacuum scale, 0-20 PSI Boost with 270 degree sweep

Features a black bezel with removable black mounting panel

3-3/8" white dial face with 250 degree sweep with chrome bezel and mounting hardware

0-8000 RPM range, driven by Air Core motor

Adjustable redline pointer

Actron's CP7527 Inductive Timing Light is designed for standard base timing with on/off touch control

Use to measure and set initial timing, check and measure centrifugal advance, and measure vacuum advance

Works on gasoline powered vehicles equipped with conventional, electronic, computer controlled, DIS, or 2-cycle ignition systems

Standard 2" black dial for a 2-1/16" opening

8 to 18 volts range with a 60 degree sweep

Features a black bezel with removable black mounting panel

Standard 2" white dial for 2-1/16" openings

100-250 degrees Fahrenheit

Features a chrome bezel with removable chrome mounting panel

Standard 2" white dial for a 2-1/16" opening

0-100 PSI range with a 60 degree sweep

Features a chrome bezel with removable chrome mounting panel

Fuel level sender

For use with Bosch fuel level gauges and 5" - 26" deep tanks

Includes gasket and mounting hardware

Wirelessly connects to your iPhone, iPod and Android smartphone

Reads and erases codes and turns off check engine light

Works with all cars and light trucks 1996 and newer; for vehicle diagnostics with your smartphone

Standard 2" white dial for a 2-1/16" opening

60-0-60 Amp scale with a 60 degree sweep

Features a chrome bezel with removable chrome mounting panel

Protective rubber boots which prevents electrical shorts

Comes with a convenient hot circuit red indicator light

Ideal for compression tests

True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.

LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.

NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.

[Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current.

[True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads.

[Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer.

SUPERSEDES to 6Y5-8350T-D0-00

True-RMS Clamp Meter: This multimeter can accurately measure 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity, and Temperature. Easy to use for labs factories and households.

Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of the inrush current is about 100ms. When the current is greater than 10A, the Inrush function works well. The inrush function is only available in AC current mode, DC current does not have the inrush function.

NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. A convenient LED flashlight illuminates a dimly lit area.

Top-of-the line timing light with direct reading advance scale adjusts from 0-90 degrees

Works with most ignition systems: conventional, electronic and computer controlled systems - domestic and import

Digital tachometer ranges from 249 to 9,990 RPM including Patented Skip Circuitry Test up to 9,990 RPM

Four function digital readout: Tachometer; Advance; Dwell; and Voltage.Fit Type: Universal Fit

Patented Skip Circuitry Test up to 9,990 RPM

Heavy-duty shock proof housing features a molded boot for extra protection against the fan blades

6-IN-1 MULTIMETER --- detect and display voltage, current, active power, battery electric energy, power frequency and power factor on 1 interface.

MEASUREMENT RANGE --- voltage AC 80.0-300.0V; current 0-100A; power 0-30000W; Electric energy 0-99999kwh; frequency 45.0Hz-65.0Hz; power factor 0.00-1.00PF.

DISPLAY --- digital LCD color display.

Traditional incandescent lighting illuminates the front of the dial

12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system

Auto Meter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 - full scale in 333 milliseconds

Provides fast and accurate RPM measurements of rotating objects without contact and revolution count of moving objects

Built-in laser pointer identifies target area

Internal memory recalls maximum, minimum values as well as last value stored

Traditional incandescent lighting illuminates the front of the dial

12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system

Auto Meter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 - full scale in 333 milliseconds