Best Tester Engine Compression Gauges in 2026

2 ½" triple scale gauge (0-300 psi, 0-21 kg/cm², 0-20 bar)

16" rubber hose (with 14mm & 18mm spark plug adapters)

18mm, 14mm, 12mm & 10mm adapters

Adapters for a wide number of vehicles (spark plug types/depths)

Includes 2 rubber cones ends for quick check (no need to thread into head)

3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa

【Deluxe Design Set】: Complete package for compression testing on gasoline engines, comes with 4 adapters of standard and specialty, and 16-inch flex hose gauge assembly with quick coupler, all firmly stored in the deluxe case.

【Accurate Measurement】: Digital compression gauge has incredible 0.5 display resolution within 1% of the exact pressure ranged from 10-200 PSI.

【Smart Display and Bleeder Valve】: Wide backlit LCD screen displays large, clear numbers in 4 units. Auto off after 2.5 minutes of inactivity to preserve battery life. Side bleeder valve allows repeated tests without disconnecting the hose.

✅ OIL PRESSURE GAUGE KIT: Shankly's oil pressure gauge is used to monitor the oil pressure in your vehicle. This pump tester prevents you from engine failure, broken hose, or leaking gasket due to lack of oil. Great to have in your toolbox

✅ DURABLE & GREAT QUALITY: Shankly's oil pressure gauge line is well protected by a rubber bumper and a decent length of hose. It comes with spare orings adaptor and with quick connect couplers, making this a reliable tool and long lasting

✅ UNIVERSAL: This oil pressure tester includes a 90-degree coupling adapter for limited access applications. This is also fitted with quick coupling adaptors and 1200mm of hose that will serve a mechanic effectively for a very long time

CYLINDER COMPRESSION TEST AND DIAGNOSTIC: JIFETOR automotive engine compression tester kit is used for measuring pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston. Please refer to the vehicle manufacturer's service instructions or proprietary manual and our manual for detail

WIDE USE OF SMALL ENGINE COMPRESSION TESTER: There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the engine compression test kit, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, ATV, snowmobile, dirtbike, lawn mower, chainsaw etc. Please note, the engine compression gauge is not used for most diesel engine, due to the low pressure range 0-300PSI

UNIVERSAL AUTO CYLINDER PRESSURE TEST GAUGE CONNECTORS: The straight and angled push-on connectors in the cylinder compression tool kit are equipped with rubber tapered tip for easy and quick installation, you just need to push and hold it seal against cylinder head, rather than screw to tighten like 10mm 12mm 14mm 18mm appropriative adapters. These push-on connectors are also perfect for some types and depth spark well, which the appropriative adapters do not fit

Fits all common spark plug holes

Large easy to read gauge

SAE (0 PSI to 300 PSI) and metric (1 to 21 kilograms/centimeter square)

Cylinder leak down tester,compression test kit -Engine Cylinder Dual Gauge Leakdown Tester kit Diagnostics Tool. Suitable for any gasoline engine with 14, 12 or 10mm spark plugs.

UNIVERSAL FITMENT. Suits all local and imported cars and trucks, ideal for testing trucks and car models where clearance is minimal. check the amount of leakage in 4-stroke engines.

Designed to detect a variety of common engine faults such as worn piston rings, cylinder head cracks, worn valves and blown head gaskets. It checks the amount of leakage in an engine cylinder and helps determine the source.

FUNCTIONS: TEST CYLINDER COMPRESSION --- This cylinder compression tester kit is used for testing pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston.

APPLICATIONS: GASOLINE ENGINE CYLINDER --- Come with different sizes rotary and push on adapters, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, truck, lawn mower, ATV and so on. NOT FOR DIESEL ENGINE.

UNIVERSAL: INCLUDE 10 CONNECT ADAPTERS --- 13-in-1 engine tester gauge kit includes 1-piece spring buckle gauge; 5-pieces brass adapters M10, M12, M14, M16, M18 for wide applications; 2-pieces straight and angled push-on connectors for direct testing; 1-piece extra long 8 inches extension straight rod, 1-piece 12 inches M12 extension hose rod and 1-piece 16 inches extension hose for long reach testing. Come with extra 2-piece spark plug testers.

【Complete Kit for Car Testing】: the 9pcs cylinder testing kit comes with 8 x compression tool and 1 x spark plug tester, total package includes 1 x SPARK PLUG TESTER, 1 x 300PSI DUAL UNITS GAUGE, 1 x STRAIGHT RUBBER CONE ADAPTER, 1 x CURVED RUBBER CONE ADAPTER, 4 x BRASS ADAPTERS, and 1 x 14-inch EXTENSION HOSE, complete package allows you to test the car’s condition easily by yourself

【Extra Value with Spark Plug Tester】: the spark tester is a must have diagnostic tool for engine which has a spark plug, you can diagnose ignition or engine outboard motor issues and a fault in the fuel delivery system quickly and easily; If spark is being sent, the tester will mirror the spark and you can see it light up, therefor you can find dirty spark plugs, defective points, bad cables or connections, etc.

【300psi Dual Units Gauge with 3” Dial】: easy to read this compression gauge which comes with 0 - 300 PSI and 0 - 20 kg/ cm square dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks; Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage

Checking compression on petrol engine quickly and accurately.

Completed Kit comes with adapters for most applications.

Thread sizes: m8*1.5, m10*1.0, m12*1.25, m14*1.25

Sturty & Durable: Made of high-quality materials, and treated with rust and corrosion protection, sturty and durable enough. Large acrylic dial with rubber cover is convenient to read datas more accurately. Pressure range: 0-300 psi, 0-20kg/cm².

Professional Tester Kit: Our cylinder compression tester kit is a professional tool to measure pressure on gasoline engine cylinder quickly and accurately. It is suitable for petrol engines on motorcycles, cars, trucks, ATVs, and any other vehicles.

Easy to Carry: The handheld carrying case is made of high quality PVC, keeps all accessories in place and protects the gauges during storage and transportion.

ADVANCED COMPRESSION TEST: Includes everything you need for a fast & effective compression pressure testing of petrol, gas, and fuel engine cylinders for most spark plug types on cars, trucks, motorcycles, marines, ATVs, UTVs, snowmobiles, boats, & more

UNIVERSAL COMPATIBILITY: Includes multi-size adapters (straight, curved, & male fittings) for compatibility with a wide range of vehicles. All components are protected in a custom ABS carry case for easy organization and transport.

STURDY & ANTI-RUST: Easy-to-read instrument panel with dual units (0-300 psi, 0-21 kg/cm²). Acrylic glass gauge cover with anti-scratch coating and rubber protective cover for outstanding shock-absorption performance.

FUNCTIONS: TEST CYLINDER COMPRESSION --- This cylinder compression tester kit is used for testing pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston.

APPLICATIONS: GASOLINE ENGINE CYLINDER --- Come with different sizes rotary and push on adapters, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, truck, lawn mower, ATV and so on. NOT FOR DIESEL ENGINE.

UNIVERSAL: INCLUDE 9 CONNECT ADAPTERS --- 10-in-1 engine tester gauge kit includes 1-piece spring buckle gauge; 5-pieces brass adapters M10, M12, M14, M16, M18 for wide applications; 2-pieces straight and angled connector for direct testing; extra long 8 inches extension tube and 16 inches extension hose for long reach testing.

FITS YOUR VEHICLE -- It is compatible with gasoline 4-stroke engines and 12mm or 14mm spark. As long your vehicle has a standard spark plug socket, this set will work for you.

COMPARE CYLINDERS -- It best tests cylinder leak down and compression when comparing a suspect cylinder to a known good cylinder on the same engine.

EASY TO USE -- Remove the Schrader valve and turn the regulator off before applying shop air. Install the hose to the cylinder, the unit to an air supply, calibrate the leak gauge, and connect the unit to the cylinder hose. Diagnosis is made by observing the amount of leakage indicated on the cylinder leakage gauge and listening for leakage at various points of the car system.

Adapters for a wide number of vehicles

Includes 2 rubber cones ends for quick check (no need to thread into head)

3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa

【APPLICABLE】Quickly and accurately check compression with this Automotive Compression Tester Kit. Compact with easy to read gauge makes it an ideal accessory for the mechanically minded.

【FEATURE】Compatible for use on petrol engines motorcycles and automotive vehicles. Diagnose and repair problems all in the convenience of your own garage.

【INCLUDING】Manometer with two test pressure: 0 - 300 PSI / 0 - 21 kg / CM². Hose overall length: 430mm, pressure tube length: 153mm, angled pressure tube length: 155mm.

✔【Cylinder Pressure Gauge Set】 -- Small engine compression tester is made of durable material for long-lasting use. Checing compression of petrol engines quickly and accurately. Diagnose various common engine faults. Widely suitable for most types and depth spark plugs of gasoline engine cylinder, commonly used in motorcycle, car, truck, ATV and other types 2 or 4 stroke etc. Please press it to release pressure before the test is over.

✔【Motorcycle Engine Testing Tools】-- The precision pressure gauge is equipped with quick coupler, resin gauge cover with anti-scratch coating and aluminum protective cover, and build-in check valve with pressure-maintaining function,which makes the tool has a stronger sealing performance and a more accurate readings. Easy to read colored dial with triple scale gauge (0-300 psi, 0-21 kg/cm², 0-20 bar). The release valve allows repeated tests without hose reassembly.

✔【Universal Compatibility】-- There are 4 different sizes of brass adapters with sealed O-ring in the cylinder testing kit for vehicles and motorcycles, meets many practical needs. 45° universal direct shaft & straight universal direct shaft, equipped with rubber cone tip for easy and quick installation, you just need to push and hold it seal against cylinder head; 16.75" rubber extension hose for long reach testing.

AUTOMOTIVE CYLINDER COMPRESSION TESTER: JIFETOR engine compression tester kit performs specific accurate pressure test for gasoline engines, especially for small engines within a short time. The varied gauge reading can directly reflect whether there are some faults in the cylinder such as worn piston rings or valves, carbon build-up, cracked cylinder walls and blown head gaskets, etc. Widely suitable for motorcycles, cars, trucks, ATV's, snowmobiles, dirtbikes, lawn mowers, chainsaws, etc.

3" DIAL COMPRESSION GAUGE: The pressure gauge features clear reading, good air tightness and high precision. Equipped with dual scale big dial, quick coupler, anti-scratch resin window and rubber cover around for protection. The build-in check valve holds pressure to get maximum pressure value, and the release valve allows repeated tests without hose reassembly, save trouble. Remember to press it to release pressure before the test is over. Range: 0-300psi/0-20bar. Not for most diesel engines.

DEDICATED AND UNIVERSAL ADAPTERS: Compression gage is respectively available with extension hose and universal straight or angled spark plug adapter. 4PCS dedicated brass fittings(10mm 12mm 14mm 18mm) with sealed O ring, work with extension hose or rod to connect the corresponding spark plug wells. Specially provided aluminum extension rod can be assembled to the extension hose, make it easier and more convenient for rotating while installing the brass fittings to or unscrewing them from engine

Engine Compression Gauge: Dual scale of 0-300 psi and 0-20 bar. The engine cylinder gauge tester is built with quick connect system and pressure relief button for easy assembly & disassembly and allows repeated tests without removing the hose over and over again. 3-inch easy to read gauge is covered by hard-wearing rubber coating to prevent accidental falls or scratches. High visibility dial and sensitive hand help to know realtime pressure at a glance.

Engine Compression Gauge: Dual scale of 0-300 psi and 0-20 bar. The engine cylinder gauge tester is built with quick connect system and pressure relief button for easy assembly & disassembly and allows repeated tests without removing the hose over and over again. 3-inch easy to read gauge is covered by hard-wearing rubber coating to prevent accidental falls or scratches. High visibility dial and sensitive hand help to know realtime pressure at a glance.

Adapters & Hose: Cylinder compression tester kit comes with 2pcs universal rubber cone end adapters(straight type and 45° angled type) for quick compression check, 4pcs brass adapters for most types & depths of spark plug wells. Popular thread sizes: M10×1.0, M12×1.25, M14×1.25, M18×1.5. Flexible reinforced high pressure rubber hose has 16" in length and 300 psi W.P for extension function, enduring torsion and temperature to ensure security assurances.

Air-compressed Work: This pneumatic cylinder leak down tester tool needs power support from air compressor (not provided in this package) within the standard shop air supply of 45-100 psi via American air quick plug. Black AR2000 air regulator valve is used for pressure adjustment to ensure that the input compressed air pressure can reach its required value at any time. Push out to use, and back to lock. Turn the knob anticlockwise to switch off before connecting.

Dual Detections: Cylinder leak tester tool approves cylinder pressure test for use in conjunction with cylinder leakproofness detection. Reading from dual scale (psi / bar) and 0-100% (Accuracy: ±0.5%), 3-inch gauges have clear dial and accurate pointers for easy view on readings at a glance. Leakdown gauge tool hooks up to air machine can help diagnose and identify common engine faults like worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets.

Wide Coverage: It is not just as a compression tester. There is 1pc 10" rubber hose and 2pcs aluminum adapters besides the combustion leak tester. The cylinder compression tester kit provides all the tools necessary for the compression check and leakage test of engine cylinders on most import and export petrol gasoline makes and models with M10, M12 or M14 spark plugs. Especially good for testing trucks & car models where clearance is minimal. Ideal for mechanics and occasional amateurs.

Adapters for a wide number of vehicles (spark plug types/depths)

Kit includes 2 rubber cones ends for quick check (no need to thread into head) and 8" 14MM thread aluminum extension tube

3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa

PRECISE MEASUREMENTS: Digital compression gauge with incredible 0.5 display resolution within 1% of precise pressure from 10-250 PSI, for quick and accurate checking of gasoline engine compression. Acrylic glass gauge cover with scratch-resistant coating and Protective rubber cover with excellent shock absorption. A built-in one-way valve with pressure maintaining function ensures that the pressure gauge obtains the maximum pressure at the spark plug during the compression process.

Package: Including 10 Connection Adapters --- 11 in 1 Engine Tester Kit, including 1 Spring Buckle Gauge; 5 Pieces Brass Adapters M10, M12, M14, M16, M18, Wide Use; 200mm Metal Extension Rod Connector One , two 50mm metal aluminum straight rods and curved rods, one extension rod hose with M12*1.25 thread.

SMART DISPLAY & BLEED VALVE: Large, backlit LCD display shows large, clear 4-unit numbers. Automatically shuts off after 2.5 minutes of inactivity to preserve battery life. Side bleed valve allows repeated testing without disconnecting the hose

FUNCTIONS: TEST CYLINDER COMPRESSION --- This cylinder compression tester kit is used for testing pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston.

APPLICATIONS: GASOLINE ENGINE CYLINDER --- Come with different sizes rotary and push on adapters, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, truck, lawn mower, ATV and so on. NOT FOR DIESEL ENGINE.

UNIVERSAL: INCLUDE 10 CONNECT ADAPTERS --- 12-in-1 engine tester gauge kit includes 1-piece spring buckle gauge; 5-pieces brass adapters M10, M12, M14, M16, M18 for wide applications; 2-pieces straight and angled push-on connectors for direct testing; 1-piece extra long 8 inches extension straight rod, 1-piece 12 inches M12 extension hose rod and 1-piece 16 inches extension hose for long reach testing. Come with extra 1-piece cylinder stethoscope.

Best kit for the most popular truck/tractor engines for use on Cummins 5.9, Ford Powerstroke 6.0L, 6.4L, 6.7L, 7.3L (both styles), International Navistar 6.9/7.3L, International Navistar 4.5L VT275, 6.0L VT365E, 6.4L MaxxForce 7

Compatible with Repair and Replace on Cummins V6, V8, V12, 855, 5.9L, Detroit Diesel 53, 71, 92, 110, 149, V53, V71 with low or high clamp inj. hold down

Compatible with Repair and Replace on GM Duramax 4.3/5.7/6.2/6.5L/6.6L , CAT D-336, 1674, 1676, 3406, 3408, 3412; PERKINS 4.203, 4.236, 4.248, 6.354, 8.540

Adapters for a wide number of vehicles (spark plug types/depths)

Includes 2 rubber cones ends for quick check (no need to thread into head)

3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa

Check compression on most domestic and foreign diesel engines, this compression tester reads pressure from 0-1000 PSI.

Featuring a quick-connect adapter, gauge and a thumb button air release, this compression tester comes with adapters for GM, Ford, Lincoln, Isuzu, Mercedes Benz, Kubota, Toyota, Volkswagen, Peugeot.

Quick-connect adapter

Checking Compression On Diesel Engine Quickly And Accurately.Mainly used to measure the maximum pressure generated in the compression stroke of the diesel engine cylinder. Specially designed to check the compression pressure of gas in the cylinder.

High Quality accessories, anti -oxidation and corrosion.

Various specifications, completed Kit Comes With Adapters For Most Applications

Cylinder pressure gauge is special used to check the size of the gas pressure in the cylinder measuring tool. Here I want to introduce this Multi-function Cylinder Pressure Gauge for you. It is made of high quality alloy steel, plastics and rubber materials, durable and practical for you to use. Lightweight and portable, it is easy for you to use in the daily life. What's more, it has the function of compression gauge test set for engine cylinders diagnostic tester.

Made of high quality alloy steel, plastics and rubber materials, durable and practical

Includes 10mm, 12mm, 14mm and 18mm spark plug adapters

【Importance】 Use it to identify and diagnose fuel supply and injection systems for petrol-gasoline and diesel engines. With this lightweight utility set, you don't have to worry about the unexpected situation on the road

【Universal Fittings】 Including two adapters, is suitable for Chrysler, Ford, Toyota, Nissan, GM, and most cars or trucks worldwide. Refer to our detailed instruction

【Good Quality】Made of high quality solid brass, rubber and hose, rustproof, firm, wear-proof for long time use. Rugged molded plastic case is specially designed for easy transportation and storage

Kit for testing compression of gasoline engines

Adapters provided for 10mm, 12mm, 14mm and 18mm applications

Gauge ranges: 0-300 PSI and 0-21 BAR