Best Xituanyuan in 2026

Function：This tool separates the rubber supports from exhaust hanger brackets.

Applicable models：This tool is suitable for all imported and family car and truck exhaust systems supported by rubber hangers.（Works on all vehicles with rubber exhaust hangers.）

Operation The：operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

Must be any beginner, weekend warrior or professional. This handy 26-piece clamping tool can easily loosen clamps from any plastic connector housing electrically connected to the vehicle or computer.

In a variety of automotive applications, the design of the terminal is to save work, loosen the shell from the plastic plug and place it in the blow mould for storage and transport.

This terminal release kit is suitable for almost all vehicles equipped with electrical clamps and cables that can be easily disconnected even in inaccessible places, giving you more time to do more important tasks.

Features: it is used to detect many common faults of the engine, such as piston ring wear, cylinder head crack, valve wear and cylinder head seal burst. It checks the amount of leakage in the engine cylinders and helps determine the source of the leakage.

General accessories: It is very suitable for testing trucks and models with minimum clearance. Check the leakage of the four stroke engine.

How the leak tester works: once the leak tester is connected to one of the cylinders, compressed air (45-100 psi) enters the cylinder through an integrated pressure regulator. Diagnose by observing the amount of leakage shown on the cylinder leakage gauge and listening to the leakage at all points of the vehicle system. It is not applicable to shallow cylinders.

【Compatible With】：Applicable to 700R4/ TH350/ TH400/ NP-700RTL,compatible with Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks.

【Function】：Improving the cooling efficiency of the vehicle's gearbox helps to avoid heat related faults and thus extends the service life of the equipment.

【52" 6AN Transmission Cooler Lines Kit Includes】：Two stainless steel braided hoses with an inner diameter of about 52 inches and 3 / 8 inches; Four an-6 flared to 1 / 4 "NPT billet adapters for most 700r4, th350, TH400; two an-6 flared to 3 / 8" NPT billet adapters; Two 90 degree an-6 reverse flared to an-6 flared billet adapters.

【Compatible With】：Applicable to GM turbo 350 (partially 1 / 4 "NPT), turbo 400,turbo 200-200R4,power glide (partially 1 / 4" NPT),700R4,4L60 4L60E,4L65E,4L80E,compatible with Ford C4/C6/AOD & GM Chevy 1996-2021.

【Function】：Improving the cooling efficiency of the vehicle's gearbox helps to avoid heat related faults and thus extends the service life of the equipment.

【70" 6AN Transmission Cooler Lines Kit Includes】：Two stainless steel braided hoses with an inner diameter of about 70 inches and 3 / 8 inches; Four an-6 flared to 1 / 4 inch NPT billet adapters; Two an-6 flared to 3 / 8 "NPT billet adapters; four 90 degree an-6 reverse flared to an-6 flared billet adapters, two aluminum 4l80e adapter accessories.

Suitable for 3/16" copper, nickel copper and steel pipes.Suitable for repairing brake lines on most vehicles.

Handheld and easy to operate, it can be used in the appropriate position on the vehicle or on the clamp table.

Accurate 45 degree SAE double flare can be easily made on 3/16" pipe.

Compatible: with most TOYOTA and LEXUS,Lexus RX330, RX350, RX450h,Toyota Tacoma, Land Cruiser, Yaris S/Base, VIOS,Corolla.

Use: removes & installs Fuel Tank Lid / fuel pump lock ring / fuel pump gauge retainer.

Fit: For TOYOTA fuel pump gauge retainer (77144-04010,77144-52040),for Lexus fuel pump gauge retainer (77144-48020).

【Packing】：Synchronizer x 1,Black Rubber Hose (90cm) x 4,Black Rubber Hose (10cm) x 4,Clear Rubber Hose Restrictor (1.5mm) x 4,T-Type Adapter (Φ 4mm) x 4,Adapter (Φ 4x5mm) x 4,Adapter (Φ 4x6mm) x 4,Instructions x 1,Product packaging box x 1.

【Accurate】：The 4 column XiTuanYuan will accurately balance 2, 3 and 4 cylinder carburetor and fuel injected throttle bodies.

【Principle】：Stainless steel column is used to replace highly toxic mercury in balance instrument. The stainless steel column will be sucked by the negative pressure of the engine and float in the transparent conduit to indicate the balance state.

SAVE TIME, FRUSTRATION AND MONEY -There are 5 pcs different kinds of trim tools, including 4 pcs car door panel removal tool and 1 fastener remover to facilitate your needs when repairing.

PREMIUM GRADE NYLON -This tool set made of impacted resistant nylon fiber material with high level craftsmanship, tougher than common nylon one, it’ s non-toxic and eco-friendly designed.

ERGONOMIC DESIGN - GOOACC trim removal tool kit is made in accordance with ergonomics design with super lightweight and easy handheld features which effectively effort saving for various interior and exterior car trimming.

This tool separates the rubber supports from exhaust hanger brackets.

The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

The product is manufactured in china

The product is highly durable and easy to use

Easy installation and easy handling

Shelf pegs pin diameter Φ: 5mm. Pegs pin length: 8.7mm. Total length:19mm

WARM NOTICE: These shelf pegs only fit for Φ 5mm holes,please make sure the Pleasae make sure the pins diameter size you need before purchase,since different shelves with different hole sizes. You can find another sizes in our store

The shelf pins fit Φ5mm shelf holes on cabinet, wardrobe, shelf, bookcase, and more

These shelving sleeves are designed to replace those damaged shelf clips without having to buy a new shelf, saving you a ton of money and fit for Alera, Metro, Thunder Group, etc brands.

These wire shelf clips fit the shelves that you got from target that you had lost the original clips from. Easy to use and were a much more durable alternative to just junking the shelves and getting a new set

The wire rack locking clips are made of high-quality ABS (plastic) to ensure a durable service life, this set contains 72 clips, a total of 36 pairs, and 4 pairs of clips are required to install each shelf. Enough for 9 shelves.

Easy to use and handle

The product is highly durable

The product is manufactured in china

A simple way to expand a warped manifold so all bolt holes are accurately aligned

Helps prevent cross-threading of manifold bolts

Works best when used in pairs or install before removing manifold to prevent misalignment

48-pack of ClosetMaid wall clips for wire shelving installation

Used to secure ClosetMaid wire shelving to drywall

Use for standard shelf mount applications and normal loads

Use one shelf clip every 12 inches and one at each end of shelf.

Use with or instead of Wall Clips.

For concrete/stud and drywall installation.

Heavy Duty Durability - Made of No.65 Manganese Steel bar, it's much tougher than common carbon steel pliers,

Ergonomic Design - Poly Propylene Ethylene (PPE) handle, anti-skid and no grinding to hands, comfortable handheld for a breeze removal of staples, plastic bolts, door panels, dashboard and other upholstery

Effective Effort Saving - Adopts Labor-saving Lever and Spring loaded design of the plier with 5.5" long handle, simply get all stubborn clips removed without damage, A Real Time and Effort Saver!

【Durable Material】Pegs for shelves made of high quality zinc alloy and polished nickel,good quality and durable for long using life,surface is smooth without metal burrs,can meet your daily shelving needs.

【Package included】Shelf pegs & pins totally included 104 Pcs 4 styles nickel plated shelf holder pegs:8 pcs L-shaped support pins with hole,10 pcs dowel pins,44 pcs flat spoon shelf bracket pegs,42 pcs cylindrical shaped cabinet pins.

【Size Detail】Shelf support pegs can fits all cabinets with 5mm and 1/4 Inch holes.Bracket style shelf support size: 6.35 mm/ 1/4 inch in diameter,pin length is 8 mm/ 0.30 inch,13 mm/ 0.51" in width; Flat spoon shelf holders pegs size:5 mm/0.20" in diameter,pin length is 9 mm/ 0.35 inch;Cylindrical shaped shelf pins size:5 mm/0.20" in diameter,pin length is 7.5 mm/ 0.3 inch;Dowel pins size: 5 mm/0.20" in diameter and 25mm/0.98" in length.

High Quality - Constructed to stand up to daily wear-and-tear. Locks down shelving securely.

Material - Made of ABS (plastic) with Black color. Fits on poles with 1" pole diameter (except for "gold bond" shelving), **Please measure before purchase to make sure the clips can fit your poles and shelf holes**

Easy installation - no tool assembly. Quickly and easily adjusts to any position.Quantity - A pack of 24 piecess; enough for 6 shelving plates

Color: Black, Material: high-quality ABS (plastic) .Locks down shelving securely,Constructed to stand up to daily wear-and-tear.

Its wire racks with a 1" outer diameter of metal poles. Perfect for all kinds of shelving, split sleeve lock metal shelf.

Package includes 37 Pairs/74Packs wire shelving shelf lock clips, enough for your needs.Durable and strong,long use life.

High Quality - Constructed to stand up to daily wear-and-tear. Locks down shelving securely.

Material - Made of ABS (plastic) with Black color. Fits on poles with 3/4" pole diameter (except for "gold bond" shelving), **Please measure before purchase to make sure the clips can fit your poles and shelf holes**

Easy installation - no tool assembly. Quickly and easily adjusts to any position.

GREAT QUALITY: These pilaster shelf support clips are made of high-strength steel with a Zinc finish.

FUNCTION: Compatible with 255 Series Pilasters. Perfect for adding, adjusting, or supporting shelves.

STYLISH: Have a floating shelf effect with these metal shelf support clips. Will fit in pilaster strip slots well.

Color: Black, Material: high-quality ABS (plastic) .Locks down shelving securely,Constructed to stand up to daily wear-and-tear.

Its wire racks with a 1" outer diameter of metal poles. Perfect for all kinds of shelving, split sleeve lock metal shelf.

Package includes 27 Pairs/54Packs wire shelving shelf lock clips, enough for your needs.Durable and strong,long use life.

Fits 2-1/2" Exhaust Pipe

Easy Install - Bolt On To Exhaust Pipe And Adjust Hanger To Desired Length. Cut Off Excess Portion Of Hanger.

9-1/2" Hanger Length (8" of Thread)

ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection.

MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more.

TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work.

Mounts to the top of any flat panel TV

No tools or hardware required

Ideal for soundbars, games systems, speakers, cable and set-top boxes, pictures and home décor items