Best Adafruit Industries in 2026

Two 1/2" (Nominal non-taped National Pipe) outlets

Single direction flow

Valve has a gasket arrangement inside requries minimum pressure requirement of 0.02 Mpa (3 PSI)

100 pack

Popular with keyboard makers

Surface Mount

The switch and LED are electrically separated, so to change the color, use a microcontroller to both read the contact pins and toggle the color control pins

One anode and 3 cathodes for each red, green, and blue

Skill Level: Assembled and Tested

Product 1: Professional grade 3/4" anti-siphon valve with flow control; compatible with any standard sprinkler timer

Product 1: Designed for above ground installation, will prevent back flow when properly installed 6" above highest sprinkler head

Product 1: Operates automatically or manually with manual bleed screw

VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.

ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.

-NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W.

++ Fibropool 2" Posi-Close 3 WAY VALVE. it features 2" slip ports. Your 2" pipe will glue inside the port.

++ CPVC construction allows temperature and impact resistance.

++ Serviceable, but does not need grease or lube, PTFE seats are lubeless.

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve

[SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '')

[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

2 way solenoid valve, 1/4" NPT port, brass body, DC12 volt

High quality normally closed electric solenoid valve, for water, air or oil

Working temperature range: -5 ℃~85 ℃

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

【Product Name】2-Position 5-Way Solenoid Valve(Outlet wire)

【Voltage】DC12V【Working pressure】25~116℉【Working Temperature】32-140℉

【Working Principle】When the coil is powered off, the valve stays open - when powered on, it closes.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

2 way solenoid valve, 3/4" NPT port, brass body, AC110 volt

High quality normally closed electric solenoid valve, for water, air or oil

Working temperature range: -5 ℃~85 ℃

Valve Type: 2 Way Normally Closed (Valve opens with energized)

Port Size: 1/4" NPT Female Port

Coil Voltage: DC 12V

DC 12V 1/4" Quick connect Solenoid valve.

Turn on water when system start;and cut off water when system stop.

Working pressure:0.02-0.8Mpa. Its working temperature:32-158℉ (0-70℃).

【Service Media/Material】 Air, Gas, Liquid, Water./ Anodized Aluminum

【Port Coil Voltage】 12V Port size: 1/8" Female inlet/outlet port.

【Temperature/ Pressure Range】 23-176°F, Pressure Range:115 PSI.

【Model】Rotary Lever Hand Valve HV-02

【Size】 Air Inlet (P)=1/4”NPT,Air Outlet(A B)=1/4”NPT,Air Exhaust(R S)=1/4”NPT

【Pressure range】25-116Psi【Working temperature range】32~140℉

Genuine HydraForce 6352012 Solenoid

12v DC; 7.2 Ohms; 1.67 Amps; 20.5 Watts

Connection: 18” Wire leads

Normally Closed Type.

Material: Plastic , Brass

Voltage: DC 12V. Thread Size : 1/2" G. Working Temperature : 32-212°F ,Working Pressure : 0.01~0.8Mpa

Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil.

Port Size : 1/2" Female NPT , 2W160-15

Voltage: DC 12V

Material: Metal , plastic

Size : 1/4" tube

Voltage : DC 12V

.WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.

.2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum).

.Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.

Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

U.S. Solid valve- industrial grade products.

1/8" Brass direct acting with NBR gasket.

ISO/OEM/ODM/CE

Two 1/2" (Nominal non-taped National Pipe) outlets

Single direction flow

Valve has a gasket arrangement inside requries minimum pressure requirement of 0.02 Mpa (3 PSI)

High Quality - Made of high quality material with chrome plated, this valve is durable, stable.

Power - It can accept 12 volt vehicles.

Max Pressure - The valve max air pressure is 200 PSI.

Model : 4V210-08; Operation Type : Internally Piloted Acting Type

Type: 2 Position 5 Way; Power Consumption : DC 12V; Operating Pressure: 0.15 ~ 0.8MPa

Position & Way Number : Two-position, Five-way; Female Thread Port Diameter : 11.4mm / 0.448", 8.5mm / 0.334";Joint Pipe Bore : Inlet=Outlet=1/4''

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.