Best Agfrc in 2026

【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer.

【UPGRADE & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer to change the torque, speed, angle, etc. The AGF-SPV2/V3 only can be used for AGFRC servo with ASS or PROGAMMABLE mark. Please read the instructions carefully before use.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot.

【High Precision & Torque】 Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. The maximum torque of this rc crawler steering servo is up to 32 kg/cm (444.40 oz/in) @ 8.4V and speed up to 0.135sec/60° @ 8.4V.

【Upgrade Version & High Quality】 This upgraded A73CHLW V2 coreless servo uses the upgraded thicker pin shafts and all strengthen steel gears, which is more sturdy and durable and has stronger anti-collision performance.

【Programmable】 This high torque servo is programmable by the AGF-SPV3 servo programmer (not include) to change the torque, speed, angle, inversion, neutral position, etc.

Large Torque - 24KG high torque DC motor digital servo. The maximum torque is up to 24 kg-cm (333 oz-in) @ 8.4V. Operating Voltage: 4.8V ~ 8.4V

High Quality - Equipped with CNC Aluminum middle shell can enhance the heat dissipation; Titanium gear with high accuracy performance, service life has been greatly increased.

High Precision - Advanced linearity and accuracy with precision potentiometer with new design, stable, low noise, IP65 waterproof, dust-proof.

Weight 22g, Size: 23*12*27.5mm (0.90 x 0.47 x 1.08 in)

Full CNC aluminium hulls and structure

High performance digital mini servo , High precision metal gears

Unique Shell Design - A special style for the 2023 AGFRC store celebration. Because of the unique process, the color pattern of the shell of each A20CLS servo is different, so each person has their own unique and exclusive servo, each color pattern is not repeated.

Programmable - This 7.5KG high torque servo is programmable by the AGF-SPV3 servo programmer(not include) to change the torque, speed, angle, inversion, neutral position, etc.

High Precision & Quality - advanced linearity and accuracy with precision potentiometer, stable, low noise. Operating Voltage: 4.8-8.4V; Size: 30*10*35.5mm (1.18 x 0.39 x 1.38 in). A20CLS high torque wing servo equipped with patent reinforced strength steel gear, double ball bearings, full CNC Aluminium housing and coreless motor.

Upgrade version: programmable, 8.4V high voltage application

Stall Torque: 3.8 kg-cm (52.77 oz-in)  @ 6.0V; 4.5 kg-cm (63 oz-in) @ 8.4V

Operating Speed: 0.13sec/60° @ 6.0V; 0.10sec/60° @ 8.4V

High Precision & Torque - Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. The maximum torque of this rc crawler steering servo is up to 36 kg/cm (500 oz/in) @8.4V and speed up to 0.071sec/60°@8.4V.

Upgrade Version & High Quality - This upgraded A80BHSW V2 brushless servo uses the upgraded thicker pin shafts and all strengthen steel gears, which is more sturdy and durable and has stronger anti-collision performance.

Programmable - This A80BHSW V2 high torque servo is programmable by the AGF-SPV3 servo programmer (not include) to change the torque, speed, angle, inversion, neutral position, etc.

【HIGH TORQUE & 4-POLE BRUSHLESS MOTOR】AGFRC A81FHM 74KG high torque rc servo motor adopts 4-pole brushless motor, which can provide greater torque under the same voltage. The maximum torque of this steering servo is up to 74 kg-cm (1028 oz-in) @ 8.4V and speed up to 0.125sec/60° @ 8.4V. Size: 40*20*38mm (1.57*0.79*1.50in)

【Programmable & Winch】The upgrade waterproof digital smart servo is programmable by AGF-SPV2/3 servo programmer(not include) to change torque, speed, angle, inversion, etc. It also can be a winch servo via changing firmware.

【HIGH PRECISION & IP67 Waterproof Design】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness. Stable, low noise, dust-proof, advanced linearity and accuracy. With IP67 waterproof design, which make servo still work normally when immersed up to 1 Meter depth of 30 minutes.

【Programmable & Winch】 The upgrade 33KG high torque digital smart servo is programmable by AGF-SPV3 servo programmer(not include) to change torque, speed, angle, inversion, etc. It also can be a winch servo via changing firmware.

【High Torque & Speed】 The maximum torque of short body servo is up to 33 kg-cm (459 oz-in) @ 8.4V. Operating Speed: 0.065sec/60° @ 8.4V. Operating Voltage: 4.8V ~ 8.4V, Weight: 66g(2.33oz)

【High Precision & Performance】 Advanced linearity and accuracy with precision magnet angle sensor, stable, low noise, waterproof, dust-proof. Equipped with strength steel gear, full CNC Aluminium shell can enhance the heat dissipation, with low power consumption.

▶Upgrade Stoke: Upgrade from 7mm to 9mm

▶Large Torque: The maximum torque is up to 240g-cm ( 3.33 oz-in ) @ 6.0V

▶High Speed: 0.017sec/1mm @ 3.7V, 0.012sec/1mm @ 6.0V

Upgrade & Programmable - This waterproof high torque servo is programmable by the AGF-SPV3 servo programmer(not include) to change the torque, speed, angle, inversion, neutral position, etc.

3S / 4S LiPo Direct Connection - 1/5 scale high torque servo is with 3S / 4S LiPo high voltage application, available to connect with 3S / 4S LiPo battery directly without BEC. Ideal for 1/5 scale buggy, monster trucks, RC car, crawler, boat, plane, helicopter, on road, off road, etc.

IP67 Waterproof Design - Stable, low noise, dust-proof, advanced linearity and accuracy. With IP67 waterproof design, which makes servo still work normally when immersed up to 1 Meter depth of 30 minutes. Size: 65.8*30.0*59.0mm (2.59 x 1.18 x 2.32 in)

【High Precision & High Torque】 Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. AGFRC RC steering digital servo motor uses high-precision CNC production technology to reduce production deviation and improve product tightness. The maximum torque of this steering servo is up to 66 kg/cm (917oz-in) @14V and speed up to 0.105 sec/60°@14V.

【Winch Mode & 3S LiPo Directly Connect】 This upgrade high torque servo is programmable by the AGF-SPV3 servo programmer (not include) to change the torque, speed, angle, etc., it also can be a winch servo via changing firmware. It is with 3S LiPo high voltage application, available to connect with 3S LiPo battery directly without BEC.

【High Quality & Performance】 Standard 66KG waterproof high torque servo equipped with full Aluminium housings, three ball bearing, and patent reinforced steel gear for smoother operating experience and stronger anti-collision performance; and using magnetic angle sensor which is low power consumption and can instantaneous angle sensing.

◆Compatible with high frequency Futaba FASST, stronger anti-interference capability.

◆High quality PA to ensure high receiving sensitivity;

◆Short antenna, micro size with 4CH output, especially designed for mini aircraft to save mounting space;

High Torque & Speed - Advanced linearity and accuracy, stable, low noise. The maximum speed of this full metal gear servo is up to 0.065sec/60° @ 8.4V and torque up to 8.5 kg-cm (118 oz-in) @ 8.4V.

High Quality & Performance - This 3D helicopter rc servo equipped with robust titanium gears, long lifespan brushless motor, double ball bearings. Full CNC Aluminium housing for fast heat dissipation, accuracy with precision potentiometer.

Programmable - This upgrade brushless steering servo motor is programmable by the AGF-SPV3 servo programmer (not include) to change the torque, speed, angle, inversion, etc.

This combo included 1 pcs AGFRC A06CLS 2.2kg /0.060sec programmable coreless Mini-Z servo + 1 pcs GY04M V3 Mini-Z gyros + 1 pcs AGF-SPV3 Servo Programmer

High speed and high precision.

Super light weight and compact size.

Programmable & High Torque - AGFRC 45kg high torque servo is programmable by the AGF-SPV2 servo programmer to change the torque, speed, angle, inversion, etc. The maximum torque of this steering servo for RC car is up to 45 kg/cm (597 oz/in) @ 8.4V and speed up to 0.085sec/60° @ 8.4V.

IP67 Waterproof Design -With IP67 waterproof design, when you cross the mountains and pass the charming stream, fully magnetic waterproof IP67 grade can let your model play with the river. IP means Ingress Protection Rating, 6 = Dust Tight, 7 = Immersion up to 1 Meter depth of 30 minutes.

High Precision - A81BHMW digital RC servo motor uses high-precision CNC production technology to improve product tightness. Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof.

AGFRC A20CLS servo metal gear set + bearings + Pin shaft.

Gear Material: Strength steel + Copper

Weight: 8g (0.28oz)

AGFRC A86BHMW servo metal gear set.

Gear Material: Strength steel

Weight: 20g (0.71oz)

【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer.

Ultra Fast / Extremely Strong / Unbelievably Precise!

Metal Gears / Full Ball Bearings / Shockproof

Waterproof / Digital / Brushless

【UPGRADE & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer to change the torque, speed, angle, etc. The AGF-SPV2/V3 only can be used for AGFRC servo with ASS or PROGAMMABLE mark. Please read the instructions carefully before use.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot.

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness; Abundant quantity and diverse styles that can meet your various needs

Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red

Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more

22awg 60 cores JR Color Servo Cable

Color: Brown/Red/Orange

Length: 50 feet (15 meters)

Portal axles, Divorced transfer case, High strength 1.5mm C-Channel chassis rails, 4-Link suspension, Aluminum threaded shocks, Functional 1.9 beadlock wheels, CNC machined spools, Metal wheel hexes, Rubber sealed ball bearings throughout, 47º precision steering, Panhard bar, Front mounted motor.

Licensed International Harvester Scout II body, Hard plastic grill, LED ready body and bumpers, Plastic folding mirrors, Molded inner and outer fenders, Licensed Interco Super Swamper tires, Shackle mount bumpers (LED ready), Plastic rock sliders

Adjustable wheel base, Adjustable ride height, Adjustable toe angle, Multiple shock positions, Adjustable approach and departure angle, Tunable suspension, Lockable adjustable slipper clutch, Many upgraded parts available, Many 3D printable parts available.

Used for RC cars, trucks, airplanes and helicopters servo connection or receiver connection

For servo connection or receiver connection,control two servos with one radio channel

Wire Length: 30CM/11.8in,easy to use.

Male to Female RC Servo Extension Lead Wire

300mm/12In Futaba Servo Extension Lead Wire

Used for Futaba JR Servo,RC Car, plane and quadcopters,tricopters,helicopter servo connection or receiver connection.

Meets the needs of today's demanding pilots

Surface Mount Technology improves reliability in applications where there is vibration

High impact plastic case is designed to withstand minor crashes and the effects of model fuel

DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66

High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings

Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）