Best Agfrc Servo Bearings in 2026

A standard servo with the dual bearing difference

For RC cars, boats, and any application where standard servos are used

Weighs just 1.3 ounces, and delivers 44 oz.-in. of torque with 4.8V power

2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.

The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo

High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life

Copper & Aluminum / Stainless Steel & Aluminum

High Torque - 330 oz-in torque at 7.4V; Speed: 0.17 sec/60°at 6.0V; Output Spline: 25T.

Coreless Motor - Strong explosive force, low noise, fast response speed, high stability, longer life.

Steering Performance - SunFounder High-Torque 330 Servo provides noticeably faster turning speed and works great with TSM equipped vehicles.

DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66

High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings

Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）

PERFECT FIT: Powerful servo replacement part for remote-controlled cars and trucks

WATERPROOF: Waterproof housing protects the internal mechanisms from water damage

REBUILDABLE: Rebuildable with the 2072R gear set and 2074 servo case

25KG servo - maximum torque can up to 25kg.cm (6.8V)

Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance

High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life

9KG LOW PROFILE servo

digital Short body servo

High-precision Taiwan-made aluminium gears

Traxxas 2250 - Waterproof High Torque Coreless Metal Gear Digital Servo

Features: Waterproof Compatible with TSM Metal Gears Ball Bearings Aluminum Center Case Coreless Motor Type Digital Controller Compatible with Most Traxxas 1/10 Vehicles Factory Fit for Drop-in Installation into Most Traxxas Models

Includes: (1) Servo

Unique Shell Design - A special style for the 2023 AGFRC store celebration. Because of the unique process, the color pattern of the shell of each A20CLS servo is different, so each person has their own unique and exclusive servo, each color pattern is not repeated.

Programmable - This 7.5KG high torque servo is programmable by the AGF-SPV3 servo programmer(not include) to change the torque, speed, angle, inversion, neutral position, etc.

High Precision & Quality - advanced linearity and accuracy with precision potentiometer, stable, low noise. Operating Voltage: 4.8-8.4V; Size: 30*10*35.5mm (1.18 x 0.39 x 1.38 in). A20CLS high torque wing servo equipped with patent reinforced strength steel gear, double ball bearings, full CNC Aluminium housing and coreless motor.

Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees

The torque of M45CHW high torque servo is up to 35kg/cm at 6V and 45kg/cm at 8.4V. The speed is up to 0.12sec/135° at 6V and 0.11sec/135° at 8.4V

Coreless servo come with IP67 waterproof design, and the control angle is 270 degree. When your RC car cross the mountain or pass the river, waterproof design can let your car plays with the river

Featuring high precision steel gear, CNC AL6082 aluminum shell and 2BB ball bearing, which is high quality, less noise, good stability and long life

HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life.

GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system.

SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified.

▶270° Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.

▶Control System: change of pulse width. Pulse range 500usec ~ 2500usec for 0° ~ 270° (90°--1166usec, 180°--1833usec).

▶High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection

Upgrade version: programmable, 8.4V high voltage application

Stall Torque: 3.8 kg-cm (52.77 oz-in)  @ 6.0V; 4.5 kg-cm (63 oz-in) @ 8.4V

Operating Speed: 0.13sec/60° @ 6.0V; 0.10sec/60° @ 8.4V

High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control.

All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy.

Type: 2pcs MG90S Full Metal Gear Mini Micro Servo, Product Size: 22.8x12.2x28.5mm, Product Weight: 13.6g

Operating Torque: 2.0KG/cm, Response Speed: 0.11s/60 Degree, Rotation Angle: Max 90 Degree, Working Voltage: 4.8V, Dead Band Width: 5 microseconds

Wiring: Dark Gray: GND, Red: VCC 4.8-7.2V, Orange: Pulse Input, Interface Type: JR / FUTABA General

Designed to provide fast and precise steering in RC backyard bashers

Dustproof and waterproof in normal usage when mounted and installed

Dual ball bearings and metal gears with 25T Spline

【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor.

【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction.

【Angle】Stall Torque: 2.0kg/cm(4.8V); Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180.

【UPGRADE&PROGAMMABLE】The upgrade high speed servo is PROGRAMMABLE by AGF-SPV2/V3 servo programmer to change torque, speed, angle, etc. The AGF-SPV2/V3 only can be used for AGFrc servo with ASS mark. Please read the instructions carefully before use. Software (download required), and download link is on the cover.

【HIGH QUALITY&PERFORMANCE】Equipped with stainless steel gear, top and middle Aluminium housing can enhance the heat dissipation, which is low power consumption, service life has been greatly increased.

【LARGE TORQUE】AGFrc 19KG high torque brushless motor digital servo. The maximum torque is up to 19 kg-cm (265 oz-in) @ 8.4V. Operating Voltage: 4.8V ~ 8.4V

Dual ball bearings, Replacement part for Wltoys 12428 RC Car.

Made of first-grade material can ensure the longevity of the products.

Upgraded version provides much better stall torque.

Compatible with Traxxas Slash 2WD, Slash VXL, Rustler, Rustler VXL, Bandit, Bandit VXL, F-150 Raptor, Nitro Slash 1/10 Scale RC Car. Replaces Traxxas Part #3743.

Aluminum steering bellcrank is made of Aluminum Alloy,Anodized, CNC machined, Enhance servo steering precision, strength.

The ball bearing equipped RC steering bellcrank offer silky smooth operation for reduced friction and long life.

Made of durable materials

Made in Taiwan

These parts are manufactured with high quality materials and are machined to strict factory specs.

【Compatible】 The high speed servo is suit for 1/10 1/8 RC Car RC Crawler Robot RC Boat DIY Traxxas Redcat ARRMA AXIAL HSP HPI Wltoys Kyosho HELION upgrades Parts

【High Rotation】Well-controlled, 180 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities

【Waterproof Servo】 IP66 waterproof performance for worry free operation. High reliability, good stability, strong adaptability. Low noise, small vibration, smooth operation, long life

Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees

Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers

All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required

Hot Racing part number TM3348X; UPC 083745703108

20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)

Full metal gear. it's better for accuracy, service life has been greatly increased

Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work well

Size: 40.4x20.4x36.70mm ;Gear: Metal ;Weight: 75g (without servo horn) ;Motor Type: Coreless Motor

Torque/Speed: 35.00kg-cm/ 0.12 sec/ 6.0V,45.00kg-cm/ 0.11 sec/ 8.4V

Case Material: CNC Aluminum Case

The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.

MG996R servo torque is 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.15s/60 degrees. Recommended voltage: 5V, current use: 3A.

Dustproof and waterproof in normal usage when mounted to a vehicle

Ideal for use as a steering or throttle servo in 1/10 scale RC vehicles used for backyard bashing

Dual ball bearings