Best Agfrc Servo Gears in 2026

【UPGRADE & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer to change the torque, speed, angle, etc. The AGF-SPV2/V3 only can be used for AGFRC servo with ASS or PROGAMMABLE mark. Please read the instructions carefully before use.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot.

Ultra Fast / Extremely Strong / Unbelievably Precise!

Metal Gears / Full Ball Bearings / Shockproof

Waterproof / Digital / Brushless

2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.

The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo

High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life

Copper & Aluminum / Stainless Steel & Aluminum

High Torque - 330 oz-in torque at 7.4V; Speed: 0.17 sec/60°at 6.0V; Output Spline: 25T.

Coreless Motor - Strong explosive force, low noise, fast response speed, high stability, longer life.

Steering Performance - SunFounder High-Torque 330 Servo provides noticeably faster turning speed and works great with TSM equipped vehicles.

High quality and high cost performance.

Operating speed: 0.1second/ 60degree ( 4.8V no load)

Operating voltage: 4.8-6V

DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66

High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings

Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）

WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A.

【High Precision & Torque】 Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. The maximum torque of this rc crawler steering servo is up to 32 kg/cm (444.40 oz/in) @ 8.4V and speed up to 0.135sec/60° @ 8.4V.

【Upgrade Version & High Quality】 This upgraded A73CHLW V2 coreless servo uses the upgraded thicker pin shafts and all strengthen steel gears, which is more sturdy and durable and has stronger anti-collision performance.

【Programmable】 This high torque servo is programmable by the AGF-SPV3 servo programmer (not include) to change the torque, speed, angle, inversion, neutral position, etc.

High performance standard digital servo

Torque 500 OZ / Speed 0.100sec @ 7.4V

Torque 565 OZ / Speed 0.085sec @ 8.4V

2075X IS A NEW ALL METAL GEAR AND BALL BEARING SERVO FROM TRAXXAS

Quantity 2 Hexfly 25kg waterproof servos with included Aluminum servo horn

Aluminum case, metal gears, high Torque

Hexfly is a Redcat Racing brand

Size: 40.0*20.5*40.5mm Operating speed ( 6.8V ): 0.17 sec/60 degree Stall torque ( 6.8V ): 34.5kg/cm

Great choice for university professors and students who are interested in developing software for robot parts

High-precision metal gear with hard anodizing for better accuracy and longer service life，Water proof rubber seals screws, made of first-grade material ensure the longevity of the products

25KG servo - maximum torque can up to 25kg.cm (6.8V)

Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance

High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life

9KG LOW PROFILE servo

digital Short body servo

High-precision Taiwan-made aluminium gears

【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arm.

【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models.

【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control.

SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.

Mini Servo - small servo motor compatible with JR & Futaba interface. Micro servo running speed (at no load) : 0.09±0.01 sec/60° (4.8V) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree.

Micro Servo Motor - Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band width: 7usec. Operating Voltage: 4.8V～6.0V.

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi

Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree

Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 ms

EMAX Original 12g Mini Metal Gear Analog Servo

Operating voltage: 4.8V~6.0V

Connector type: Futaba/JR compatible

1. USES: Main Parts for Vehicles & Remote Control Toys

2. Performance:： Stable High performance digital standard servo

3. quality :High-precision metal gears with hard anodizing

This servo is suitable for all 1:8 - 1:12 RC Truck. This steering standard servo is stable and quick response time, strong, advanced linearity, accuracy with precision potentiometers, stable, low noise and waterproof. It is perfect for rc car and boat. Suitable for traxxas rustler / ARRMA Nero 1/8 Scale Monster Truck / Traxxas trx4 sport / Traxxas Slash / Stampede 2wd/ Revo 2.0.

High-precision metal gears with hard anodizing, CNC aluminum middle Shell.

180 degree rotation well-controlled, 360 degree rotation when power-off, perfect for robot joint activities.

25KG high torque servo - maximum torque can up to 25kg.cm (6.8V)

Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance

High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life

✔New Model:DS3225MG 25kg Servos.More torque,higher speed

✔Power cord is longer up to 17.7inches(45cm),and also send with a 25T adjustable metal servo arm

✔Equipped with high precision potentiometers and high-resolution digital chip,ensure stable performance, fast response, strong anti-interference ability,low noise,fast heat dissipation

Traxxas 2250 - Waterproof High Torque Coreless Metal Gear Digital Servo

Features: Waterproof Compatible with TSM Metal Gears Ball Bearings Aluminum Center Case Coreless Motor Type Digital Controller Compatible with Most Traxxas 1/10 Vehicles Factory Fit for Drop-in Installation into Most Traxxas Models

Includes: (1) Servo

High precision RC Servo -- Upgraded version digital servo for RC model.

Large torque -- Maximum torque of this RC Servo can up to 26kg/cm. (6V)

Good Quality -- Made of high quality material, reinforced metal gears, stable and low-noise.

Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees

MG90S Micro Servo Motor, updated SG90 serve motor.

Stall Torque: 2.0kg/cm(4.8V)

Operating Speed: 0.11 seconds / 60 degrees (4.8V)

Weight 22g, Size: 23*12*27.5mm (0.90 x 0.47 x 1.08 in)

Full CNC aluminium hulls and structure

High performance digital mini servo , High precision metal gears

UPGRADED NEW VERSION: DS3235 35KG High-precision, Coreless Stainless Steel Gear, Fully Waterproof, Digital Servo. Included two 25T double-locking metal servo horns;

LARGE TORQUE: maximum torque is up to 35 kg/cm (275 oz/in)@6.8V, made of strong copper & aluminum gears;

HIGH PERFORMANCE: Equipped with high precision potentiometers and high-resolution digital chip, fast response, strong anti-interference ability, low noise, fast heat dissipation.