Best Sincecam Servo Cases in 2026

2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.

The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

High quality and high cost performance.

Operating speed: 0.1second/ 60degree ( 4.8V no load)

Operating voltage: 4.8-6V

Large Torque - 20KG Servo Motor 20.5kg·cm (284.7oz·in) -22.8kg·cm (316.63oz·in)

High Rotation Support Waterproof- 270 degree rotation. Well controlled from 0 to 270 degrees, and support waterproof.

High Precision - Using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo

DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66

High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings

Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）

High performance standard digital servo

Torque 500 OZ / Speed 0.100sec @ 7.4V

Torque 565 OZ / Speed 0.085sec @ 8.4V

25KG servo - maximum torque can up to 25kg.cm (6.8V)

Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance

High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi

Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree

Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 ms

▶New Model: DS3225MG More torque higher speed

▶Power cord is longer up to 15.75inches(40cm),and also send with a 25T adjustable metal servo arm

▶Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used

1. USES: Main Parts for Vehicles & Remote Control Toys

2. Performance:： Stable High performance digital standard servo

3. quality :High-precision metal gears with hard anodizing

Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees

High precision RC Servo -- Upgraded version digital servo for RC model.

Large torque -- Maximum torque of this RC Servo can up to 26kg/cm. (6V)

Good Quality -- Made of high quality material, reinforced metal gears, stable and low-noise.

20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V.

Aluminium Case and full metal gear enhance the heat dissipation, ensure that servo motor can work well

Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.

HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life.

GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system.

SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified.

Upgrade version: programmable, 8.4V high voltage application

Stall Torque: 3.8 kg-cm (52.77 oz-in)  @ 6.0V; 4.5 kg-cm (63 oz-in) @ 8.4V

Operating Speed: 0.13sec/60° @ 6.0V; 0.10sec/60° @ 8.4V

High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control.

All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy.

Precision Metal Gears / All CNC Alum. REEFS Case

High Torque High Speed Micro Servo

WATERPROOF

【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor.

【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction.

【Angle】Stall Torque: 2.0kg/cm(4.8V); Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180.

【UPGRADE&PROGAMMABLE】The upgrade high speed servo is PROGRAMMABLE by AGF-SPV2/V3 servo programmer to change torque, speed, angle, etc. The AGF-SPV2/V3 only can be used for AGFrc servo with ASS mark. Please read the instructions carefully before use. Software (download required), and download link is on the cover.

【HIGH QUALITY&PERFORMANCE】Equipped with stainless steel gear, top and middle Aluminium housing can enhance the heat dissipation, which is low power consumption, service life has been greatly increased.

【LARGE TORQUE】AGFrc 19KG high torque brushless motor digital servo. The maximum torque is up to 19 kg-cm (265 oz-in) @ 8.4V. Operating Voltage: 4.8V ~ 8.4V

20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)

Full metal gear. it's better for accuracy, service life has been greatly increased

Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work well

Specification ： Size: 40x20x40.50mm ；Weight: 75g(without servo horn) ；Motor Type: Brushless Motor

Waterproof IP67 Servo: Excellent waterproof performance, can adapt to Rainy day and Play in a Humid

High Torque ：Torque/Speed: 18kg-cm/0.06sec/60°6V; 25kg-cm/0.04sec/60°8.4V

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi

Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.

Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°

The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.

MG996R servo torque is 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.15s/60 degrees. Recommended voltage: 5V, current use: 3A.

【Premium Quality】 Made of high quality material, full metal gears and dual ball bearings, high sensitivity, stable and low-noise.

【Low profile Case】Low profile case shape saves space and weight. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.

【High Torque Fast Speed】The digital servo provides an impressive 11.2kg torque and 0.10" transfer speed at 4.8V, when you increase the voltage to 6.0V, the specification increases to 14KG and 0.08" transfer speed!

Servo case/gaskets

For 2056 and 2075 waterproof servos

Includes exploded view sheet

Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments

High Torque Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/cm@8.4V,controllable angle range from 0 to 180 degrees

Full Metal Gear Steering Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control

2 Pack servo set : The EMAX ES08MD II digital servo's torque: 1.6kg/cm(4.8V ), 2.0kg/cm(6V), positioning speed(at no load): 0.12s / 60 degrees(4.8V), 0.1s/60 degrees(6.0V), maximum rotating angle: 180°.It can instantly generate high torque to make your RC car overtake in curve

Wide application: Equipped with JR & Futaba universal plug, the 3 wire metal servo can be well adapted to Axial SCX24 SCX10 RC cars helicopters KT, fluttering, gliding, small robots, arduino experiments and other models

Strong full metal gear: Waterproof servo motor is made of sturdy PVB plastic shell, strong steel metal gear and hard iron shaft.This powerful steering gear has passed the CE international safety test，which can withstand more than 1,000 impacts and increase your model's service life

Combines leading edge technology with super high 12 bit (4096) resolution

Coreless motor provides high speed, incredible efficiency, and low power consumption

Extremely strong steel gears ensure long-life and durability

PERFECT Upgrade Steering / Throttle Servo For Almost Any 1/10-1/8 Car, Truck Or Buggy.

DEAD BAND: 2us 1520us/330hz / MOTOR: High Quality Core Motor

SPEED (4.8v): 0.09sec 60deg / SPEED (6.0v): 0.07sec 60deg

High Touque Servo：This 35kg RC servo maximum torque is up to 35 kg/cm@7.4V high torque, Compatible with servo RC for 1/10 1/8 1/12 RC Car

Metal Gear Steering Servo：Equipped with full CNC aluminum case and stainless steel Gear servo for RC car,less noise, light weight, higher operating accuracy

Waterproof Servo：Waterproof performance IP67. Controllable angle range from 0 to 180 degree, Excellent linearity, precision control