Best Oblique Gears in 2026

High Speed Servo:37kg RC Servo,Digital High Torque Brushless Motor Servo,Can Reach the Maximum Torque of 37kg-cm(514oz-in)@8.4V,Speed up to 0.07sec/60°@8.4V,Ultra Fast,Extremely Strong,Low Noise

1/10 Waterproof Servo:IP67 Waterproof Design,Dustproof,Servo Can Still Work Normally When Immersed in 1 Meter Deep Water for 30 Minutes,Control Angle 270°.

All Metal Steering Servo:Equipped with Patented Reinforced Steel Oblique Gears,Full CNC Aluminum Housing for Fast Heat Dissipation,Light Weight,All Ball Bearings,Excellent Linearity,Precise Control，7075T6 Metal Servo Horn

High Torque Servo:Sincecam 60kg Steering Servo,Coreless Motor Rc Servo,Can Reach the Maximum Torque of 60kg-cm(833oz-in)@8.4V,Speed up to 0.14sec/60°@8.4V,Ultra Fast,Extremely Strong,Low Noise

Waterproof RC Servo:IP67 Waterproof Design,Dustproof,Servo Can Still Work Normally When Immersed in 1 Meter Deep Water for 30 Minutes,Control Angle 180°

Oblique Gears Servo:Stainless Steel Oblique Gears are More Stable and Durable,Full CNC Aluminum Housing for Fast Heat Dissipation,Light Weight,All Ball Bearings,Excellent Linearity,Precise Control

High Precision Magnetic Sensor:360° Non Contact,32bit Controller and 14bit Four Wire Digital High Precision Magnetic Encoding Angle Sensor Instead of Ordinary Potentiometer,Extremely Accurate and Stable,Never Wear.

High Torque Servo:Reinforced Steel Oblique Gears,Leading Linearity and Precision,Stable,Low Noise,Waterproof,Dustproof.The Maximum Torque of This RC Steering Servo can Reach 70kg-cm (971 oz-in) @8.4V and the Speed can Reach 0.12sec/60° @8.4V.

Waterproof 1/10 Servo:IP67 Waterproof Design,Dustproof,The Servo can Still Work Normally After Immersion in 1 Meter Deep Water for 30 Minutes,Reliable and Durable,So That Your Remote Control Model can Aalso Play in a Humid Environment or Rainy Day.

High Torque Servo:EX1660MGX Maximum Torque 60kg-cm(833oz-in)@8.4V,Fastest Speed 0.09sec/60°@8.4V.Speed,Torque,Angle,Direction,Endpoint Adjustment,Neutral Position,etc,Can be Changed by Programming Cards,Compatible with SR/SSR/SUR/SFR.

Waterproof 1/10 Servo:IP67 Waterproof Design,Dustproof,The Servo can Still Work Normally After Immersion in 1 Meter Deep Water for 30 Minutes,Reliable and Durable,So That Your Remote Control Model can Aalso Play in a Humid Environment or Rainy Day.

Oblique Gear Servo:Reinforced steel Oblique Gears,Thickened Transmission Shaft,More Stable and Durable,Full CNC Aluminum case,Fast Heat Dissipation,Light Weight,All Ball Bearings,Excellent Linearity,Precise Control,Which Optimizes the Motor Speed and Starting Current.

High Speed Servo:Sincecam Brushless RC Servo,37kg Digital High Torque Brushless Motor Servo,Can Reach the Maximum Torque of 37kg-cm(514oz-in)@8.4V,Speed up to 0.07sec/60°@8.4V,Ultra Fast,Extremely Strong,Low Noise

Waterproof Rc Servo:IP67 Waterproof Design,Dustproof,Servo Can Still Work Normally When Immersed in 1 Meter Deep Water for 30 Minutes,Control Angle 180°.

Metal Oblique Gear Servo:Equipped with Patented Reinforced Steel Oblique Gears,Full CNC Aluminum Housing for Fast Heat Dissipation,Light Weight,All Ball Bearings,Excellent Linearity,Precise Control,7075T6 Metal Servo Horn

Includes 5 pieces of cables.

Y Servo Leads are durable, soft and light

10cm lenght.

【UPGRADE & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer to change the torque, speed, angle, etc. The AGF-SPV2/V3 only can be used for AGFRC servo with ASS or PROGAMMABLE mark. Please read the instructions carefully before use.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot.

【UPGRADE & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/3 servo programmer to change the torque, speed, angle, overload protection, inversion, etc.

【IP67 WATERPROOF DESIGN】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness. With IP67 Waterproof design, which make servo still work normally when water enters into the servo. Size: 40*20*41.5mm (1.57*0.79*1.63in)

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, IP67 waterproof design, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Ideal for 1/8 1/10 buggy/monster trucks/RC car/boat/plane/helicopter/on road/off road, etc.

【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc.

【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in)

【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer.

Ultra Fast / Extremely Strong / Unbelievably Precise!

Metal Gears / Full Ball Bearings / Shockproof

Waterproof / Digital / Brushless

Standard servo

72 oz-in torque

Transit time 0.22 sec/60°

Motor Type: 3 Pole

Bearing Type: Dual Ball Bearing

Speed (4.8V/6.0V): 0.23 / 0.18

A standard servo with the dual bearing difference

For RC cars, boats, and any application where standard servos are used

Weighs just 1.3 ounces, and delivers 44 oz.-in. of torque with 4.8V power

Male to Female RC Servo Extension Lead Wire

300mm/12In Futaba Servo Extension Lead Wire

Used for Futaba JR Servo,RC Car, plane and quadcopters,tricopters,helicopter servo connection or receiver connection.

2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.

The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo

High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life

Copper & Aluminum / Stainless Steel & Aluminum

High Torque - 330 oz-in torque at 7.4V; Speed: 0.17 sec/60°at 6.0V; Output Spline: 25T.

Coreless Motor - Strong explosive force, low noise, fast response speed, high stability, longer life.

Steering Performance - SunFounder High-Torque 330 Servo provides noticeably faster turning speed and works great with TSM equipped vehicles.

【Brand Product】Emax ES08MAII 12g analog servo, high sensitivity, stable and low-noise.

【Excellent Performance】 High precise metal gear, with better accuracy and longer service life.

【Servo Upgrades】Upgraded high torque analog scx24 emax servo, large steering angle. React quickly and accurately.

Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness; Abundant quantity and diverse styles that can meet your various needs

Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red

Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more

High quality and high cost performance.

Operating speed: 0.1second/ 60degree ( 4.8V no load)

Operating voltage: 4.8-6V

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo

High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life

Copper & Aluminum / Stainless Steel & Aluminum

Large Torque - 20KG Servo Motor 20.5kg·cm (284.7oz·in) -22.8kg·cm (316.63oz·in)

High Rotation Support Waterproof- 270 degree rotation. Well controlled from 0 to 270 degrees, and support waterproof.

High Precision - Using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo

Portal axles, Divorced transfer case, High strength 1.5mm C-Channel chassis rails, 4-Link suspension, Aluminum threaded shocks, Functional 1.9 beadlock wheels, CNC machined spools, Metal wheel hexes, Rubber sealed ball bearings throughout, 47º precision steering, Panhard bar, Front mounted motor.

Licensed International Harvester Scout II body, Hard plastic grill, LED ready body and bumpers, Plastic folding mirrors, Molded inner and outer fenders, Licensed Interco Super Swamper tires, Shackle mount bumpers (LED ready), Plastic rock sliders

Adjustable wheel base, Adjustable ride height, Adjustable toe angle, Multiple shock positions, Adjustable approach and departure angle, Tunable suspension, Lockable adjustable slipper clutch, Many upgraded parts available, Many 3D printable parts available.

Used for RC cars, trucks, airplanes and helicopters servo connection or receiver connection

For servo connection or receiver connection,control two servos with one radio channel

Wire Length: 30CM/11.8in,easy to use.

22awg 60 cores JR Color Servo Cable

Color: Brown/Red/Orange

Length: 50 feet (15 meters)

Meets the needs of today's demanding pilots

Surface Mount Technology improves reliability in applications where there is vibration

High impact plastic case is designed to withstand minor crashes and the effects of model fuel

DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66

High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings

Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）

Replacement steering hardware for Traxxas 1/16 scale vehicles

Includes Upper and Lower Steering Arm, Steering Link, Servo Horn, Servo Saver, Servo Saver Spring, Servo Horn Mount and hardware

Replaces damaged or worn steering components

FEATURES: Molded composite plastic construction Steel servo saver spring

INCLUDES: Two Steering Bell cranks Bell crank Support Servo Saver Spring Drag Link Two 3x20mm Shoulder Screws joss 01/13/16 ire/joss

INCLUDES: Two Steering Bell cranks Bell crank Support Servo Saver Spring Drag Link Two 3x20mm Shoulder Screws joss 01/13/16 ire/joss