Best Apel in 2026

RTV HIGH-TEMP SILICONE : Is a gasket maker and sealant, heat resistant RTV (Room Temperature Vulcanized) Silicone, used with sealing purposes in heating systems, automobiles, other vehicles especially in sealing and adhesion works of the motor components.

PHYSICAL STRAIN : High Temperature & Heat Resistant from 104ºF to 572ºF. It is resistant up to 482 ºF when exposed continuously and up to 572 ºF when exposed temporarily heat.

SUGGESTED APPLICATIONS: It can be easily used in sealing the stoves, applications where high heat resistance is required such as heating devices, pumps and motors, chimneys, hot water boilers, electric home appliances, rear main bearing cap split line, automatic transmission pan, case halves and inside cover, damper keyway sealing, differential cover, manifolds, oil pan corner seals, thermostat, transmission pan, valve cover gasket, water pump cover gasket, exhaust manifold & connection points.

Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability

Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants

Temperature Range -65F to 500F (-54C to 260C) intermittent

Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases

Specialty silicone does not break down against gear oil friction modifiers

Seeks and seals leak paths that cut gaskets cannot

USE WHAT THE PROS USE – Extremely strong adhesive sealant retains strength above or below waterline

BONDS PERMANENTLY – Ideal for sealing, bonding and attaching on the interiors of boats and RVs, or on exteriors below the waterline and where shielded from the sun

LONG LASTING FORMULA – Tough polyurethane polymer resists weathering and salt water

Designed specially for high-torque and high vibration applications

Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids

Low odor and non-corrosive formula

Sensor-safe, noncorrosive RTV silicone gasket material formulated specifically for water pumps and thermostat housings.Fit Type: Universal Fit

Highest water-glycol resistance available in an RTV silicone

Superior adhesion and flexibility; can be used as a gasket maker or dressing

High temperature performance, adhesion and flexibility

OEM Specified, Sensor-safe, low odor, non-corrosive

Non-flammable, non-toxic

Most Advanced, High Temp Rtv Silicone Gasket Available.Fit Type: Universal

Three Times More Oil Resistant Than Conventional Silicones; Eight Times More Flexible Than Cut Gaskets

Sensor-Safe, Low Odor, And Non-Corrosive With Superior Adhesion

Slow-drying, non-hardening brush-top sealant

Resists gasoline, oil and grease

Approved for use in aviation as well as automotive applications

Slow-drying, non-hardening brush-top sealant

Resists gasoline, oil and grease

Approved for use in aviation as well as automotive applications

Maximum temperature performance

OEM Specified, Sensor-safe, low odor, non-corrosive

Non-flammable, non-toxic

Tough durable sealer utilizing silicone rubber

Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable

Fills gaps up to .015" and cures to a solvent-resistant seal that will not tear or decay during service

Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife

Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable

Fills gaps up to .015" and cures to a solvent-resistant seal that will not tear or decay during service

Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife

HI TEMP SILICONE GASKET MAKER & SEALANT: Is an RTV Silicone gasketing material, designed for use in mechanical assemblies where continuous temperatures up to 550º F or 650º F intermittent exist

WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project

EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe

BONDS weatherstripping, headliners, gaskets and more

FORMS FLEXIBLE, waterproof bond that resists vibration

EASY TO BRUSH and spread right from the tube, saving time

Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube, 2 Pack

Effectively replaces almost any cut gasket.Fit Type: Universal Fit

Makes reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating

Coats pre-cut gaskets to increase reliability without fouling oxygen sensors

Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications

Designed for dressing/sealing cut gaskets on flexible/stamped parts

Allows for easy disassembly if required; resists gasoline, oil and grease

black sealant; resistant to oil and coolant

common uses include, water pump flanges and cooling system components

has high viscosity and works effectively for joining surfaces.

DESIGN USE. Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces.

PREMIUM. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock.

FILLS & SEALS. Fills gaps up to 0.050" (1.27 mm) and forms a flexible, solvent-resistant seal that will not tear or decay.

Specially designed to withstand the harsh detergents and additives found in automatic transmission fluid

Formulated to resist aging, weathering and thermal cycling without hardening, shrinking or cracking

Improves transmission oil resistance and provides good adhesion while retaining flexibility

Fast-curing formula is sensor safe, low odor and non-corrosive

Retains high flexibility, oil resistance properties through use of a patented adhesion system

Ensures extended drivetrain warranty compliance

A synthetic rubber, visco-elastic sealer that is semi-drying

Country Of Origin: United States

Model Number: HL135275

Item Package Dimension: 6.0" L x 3.0" W x 1.0" H

The leading non-setting gasket and sealing compound in use worldwide.

Used by the world's major automotive manufacturers and several Formula 1 teams.

Non-hardening and non-setting, vibration resistant, seals surface imperfections and withstands rapid variations in temperature. Allows metal-to-metal contact and is resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants.

Higher strength on contaminated surfaces

Better flexibility and improved adhesion

Enhanced sealing capability

Lock and seal threaded fasteners

Stop fasteners from loosening from shock and vibration

Performs better than lock washers, bevel washers and other forms of mechanical locking devices

Ideal for use on frequently disassembled engines and two and four cycle engines

Fully seals within 20 minutes

Forms a tough flexible bond that is highly effective on irregular and uneven joint surfaces

OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.

RELIABLE THREAD SEALING. Cures rapidly to withstand 10,000 PSI.

UNIQUE. Replaces most tapes and pipe dopes and pre-coated parts.