Best Arizona Vortex Tube Mfg. Co. in 2026

Stainless Steel construction

Air Consumption: 25 SCFM @ 80PSIG

1/4" NPT

Vortex Tube Stainless Steel 8 cfm

80 -100 psig operating air pressure

Air Inlet 1/4 MNPT

Stainless Steel construction

Magnetic Base and Flexible Loc-Line Nozzle

Mufflers built in

Stainless Steel construction

Nema 4, 4X, 12 rated

Built in relief valves

Vortex Tube Stainless Steel 15 cfm

80 -100 psig operating air pressure

Air Inlet 1/4 MNPT

Stainless Steel construction

Amplification ratio 20:1

No moving parts

Vortex Tube Stainless Steel 10 cfm

80 -100 psig operating air pressure

Air Inlet 1/4 MNPT

Vortex Tube Stainless Steel 25 cfm

80 -100 psig operating air pressure

Air Inlet 1/4 MNPT

Stainless Steel Construction

19 CFM at 80 psi 33 Gpm 78 Dba

Safe for Use in Wet Areas

Fully user programmable with millions of possible combinations - 37 unique light sequence modes already included

Solid state switching for silent operation (no clicking mechanical relays) and circuitry to protect from kickback and voltage spikes

Compatible with all traffic lights & bulbs (non-dimmable LED bulbs included).

For use with MAJOR APPLIANCES, MOTORS and POWER TOOLS, U-Ground NEMA 5-15

APPLICATION: SJTW: Hard SERVICE cord, THERMOPLASTIC/Vinyl constructed JACKET, 300 Volt, WEATHER RESISTANT for OUTDOOR USE

IDEAL FOR appliances, motors and power tools

Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit

1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED

Everything comes in a compact case and very handy

Outlets and USB:10 AC outlets aluminum power strip ideal for workshops,enclosed garages, offices and schools,industrial use. black sockets and silver metal housing make it industrial sense, 2 USB ports deliver 3.4 Amp total output to quickly charge.

Certified:Sturdy construction with thick aluminum alloy metal housing, flame-retardant plastic panels, ETL certified, 15 Amp / 125 Volt / 1875Watt

Extension Cord:6 foot heavy duty Long Grounded Power Extension Cord(SJT 14AWG/3C) and Sturdy all-metal extruded aluminum housing.

Essential on-the-job reference

Most Pertinent Information

30pcs 16 Pin header socket connector strip with 0.1" pitch .

Female socket, single row, straight pin, Through Hole mounting.

Ideal electronic component, is easy to install.

Type: 2.54mm 40 Pins Single Row Straight Round Female Socket Pin Header Strip

Specification: Type: Female Header; Pitch: 2.54mm; Number of Pins: 40 Pin; Row Type: Single; Connector Type: Straight

Color: Black

Used Book in Good Condition

Model: SSR-40DA, single phase Solid State Relay 60A DC to AC control, CE Compliant to EN60950-1

Input voltage 3-32V DC, Load voltage 24-380V AC, Max load current 40 Amp

Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.

Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.

Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.

Huge SMD 0805 Components Assortment, 2900 pcs:

1600 pcs Resistor, 560 pcs Capacitor, 180 pcs Transistor, 260 pcs Diodes, 160 pcs Zener, 9 pcs OpAmp, 16 pcs IC, 75 pcs LED

13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB

Can be used for 3-5V DC power supply modules. It has red power indicator.

IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on

The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay

Provides secure protection withstanding all weather conditions

Good adhesion, strength and elongation for indoor/outdoor use

Flame retardant and resistant to harsh UV, abrasion and corrosion

<b>Price For:</b> Each <b>Net Weight</b>: 12 oz. <b>Lubricant NSF Rating</b>: Not Rated <b>Min. Operating Temp.</b>: 0 Degrees F <b>Item</b>: Mold Release <b>Container Size</b>: 12 oz.. <b>Max. Operating Temp.</b>: 120 Degrees F <b>VOC Content</b>: 40 - 60% <b>Application</b>: Molding, Industrial <b>Physical Form</b>: Aerosol <b>Country of Origin (subject to change)</b>: United States

Main chip: N5555;Input voltage: DC5-15V; Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input); Output frequency 1Hz-50Hz, 50Hz-1KHz, 1KHz-10KHz, 10KHz-200KHz Four Optional.

There are 4 jumpers and 2 variable resistors on the module, users can adjust the output wave with these components, to get their ideal wave easily.

Output LED indicator,: low-level LED light, high-level LED off, the frequency is low when the LED flashes.

Material: The Bullet connector is made of high-quality Brass with a tinned surface, which has the characteristics of rust prevention, high-temperature resistance, and corrosion prevention.Insulation cover is transparent, allowing a clear view.

Super srong crimps: These bullet crimp connectors make strong crimps, your wire will not slip out.

Convenient and easy to install: You Just Need to Connect the Male and Female Terminals at Both Ends, Then the Male and Female Terminals Docked to Complete the Wiring Easily, And the Male and Female Terminals can be Disconnected When Not Needed.