Best Aszlbym in 2025

Model：MTJNL1616H16 + MWLNL1616H08 + MCLNL1616H12

Cutting Direction：left cutting .Shank Diameter （length×width）: (16*16 mm) /(5/8" *5/8") ; Overall Length：(100 mm) ,

Package Included : 3pcs holders + 3 sets wrenches + 3pcs carbide inserts + 3pcs shims .

♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench.

♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use.

♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .

♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench

♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting

♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining.

Modle：10pcs CNMG 431 + 10pcs WNMG 431 + 10pcs TNMG 331 .

Material: Carbide ，Coating : PVD，For processing ：finishing of steel

The inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .

♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box.

♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining.

♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder.

Model：1PCS MGIVR2016-2 + 1PCS MGIVL2016-2 + 2PCS MGMN200-G NC3020

Shank Diameter: (5/8" inch / 16*16mm) ; Overall Length：( 6.3" inch / 160mm)

Grooving holder : Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade.

Package : 7 pieces 10mm shank indexable carbide lathe turning tool holders( SDNCN1010H07, SDJCR1010H07, SCLCR1010H06, SER1010H11, MGEHR1010-1.5, S10K-SCLCR06, SNR0010K11), 7 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN150-G, 11ER A60), 7 pieces wrenches.

Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.

7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc.

Modle：MWLNR1616H08 + MCLNR1616H12 ; Material ：Carbide

Holder type：Excircle Turning Tool Holder ； Suitable inserts：WNMG431 + CNMG431

Shank Diameter：5/8"(16*16 mm) ; Overall length：4"(100 mm)；Wrench：L3.0

Size:7/8-20 , Pitch:20 , Material : HSS

Round Die: Not easily broken tooth chip fast, abrasion resistance and long service life.

HSS tap offers precision cut threads, accurately formed for consistent, exact threading

Ansi : CCMT21.51 ( = ISO CCMT060204 ), Insert Style: CCMT, Insert Size: 21.51

IC: 1/4, Thickness: 3/32, Thru Hole: 7/64, Radius: 1/64, 7 degree

Insert Grade: BPS101

Used for machining aluminum

Carbide

10 pc/box

Made of solid tungsten carbide, providing you a better experience and durable use

14mm square straight carbide insert,Designed for numerous spiral/helical planer cutter head system,wood lathe Tools

Easy to replace your jointers and planers, excellent accessory for wood turning work.

Model：MTJNL1616H16 + MWLNL1616H08 + MCLNL1616H12

Cutting Direction：left cutting .Shank Diameter （length×width）: (16*16 mm) /(5/8" *5/8") ; Overall Length：(100 mm) ,

Package Included : 3pcs holders + 3 sets wrenches + 3pcs carbide inserts + 3pcs shims .

♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench.

♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use.

♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .

Modle：10pcs CNMG 431 + 10pcs WNMG 431 + 10pcs TNMG 331 .

Material: Carbide ，Coating : PVD，For processing ：finishing of steel

The inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .

Versatile and economical. Clearance angle of main cutting edge = 7degree

Available in 5 shank sizes and styles.

Available with 3 different radii.

Clearance angle of main cutting edge = 7degree; 3/8'' Square Shank, 5 Pcs/Set Indexable Turning Tool Set, TCMT21.51

STACR, STNCR, STECN, STDCR, STCCR, with 5 TCMT Inserts, 5 Trox Screws, 2 Torx Keys

Versatile and economical. Screw Size: M2.5 x 6

TPG322

TiN coated, C6 grade, carbide

With sharp triangle point tips, for both lathes and mills.

🎄 Model: APMT1604 PDER , Coating: CVD, Material:Carbide

🎄 Application: For processing steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC15 °- HRC45 °，installed on 400R Series End milling holder

🎄 Coating: CVD , Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance.

🎄 About CCMT060204 inserts: carbide material with CVD coating ,used for machining steel and stainless steel parts, non-ferrous metals. 80 degree diamond turning inserts.

🎄 About the internal holder / boring bar : mini ae.(Minimum machining hole diameter) 10mm,13mm,16mm; 40Cr material with forging process , strong and durable ,total length :125mm-150mm/4.92"-5.9", 95 degree right hand internal turning boring bar.

🎄 Advantage: Mini boring bars offer long life and faster cutting speed, low friction coefficient, good wear resistance .

7 pc Indexable Tutning Tool Set; Shank size： 5/8 inch x 5/8 inch;

Model of each holder & the original insert: MGEHR10-3B (insert: MGMN300); SER0625B16 (insert: 16ER); SWGCR10-3B (insert: WCMT32.5); SCLCR10-3B & SCLCL10-3B (insert: CCMT32.5); SDNCN10-3B & SDJCR10-3B (insert: DCMT32.5)

Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.

TPCN32PDTR（TPCN1603PDTR） Indexable Carbide Milling Insert 1/8" Thick,11 degree relief angle.

Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance

For turning and milling carbon and alloy steels, tools steel and stainless steel

WCMT2.52 carbide inserts

C5 grade

TiN coated

Carbide

TiN Coated

DCMT32.5

Shank Size (H x W): 3/4" x 3/4". Overall Length: 4-1/2"

Black oxided smooth finish on each turning tool holder style and shank size.

Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.

🎄 Material: Made of solid carbide with tin coated

🎄 Coating: CVD , Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, High finish and High wear resistance.

🎄 Application: Fit for MGEHR/MGIVR Grooving Cut-Off Tool

🎄 Model: APKT1604PDFR ( Radius 0.2)

🎄 Material:Using imported substrates, the service life is greatly increased. Stable, durable and sharp when cutting.

🎄 Advantage: The cutting edge is sharp, the processing is brisk, and the chip removal is smooth. The cutting edge is specially treated, and the products processed have a high degree of smoothness and a mirror effect.

✅Package Included - 1PC 5/8”16mm shank diameter lathe turning tool holder(SVJCR1616H16) + 11PCS indexable carbide turning inserts(VCMT331) + 1PC wrench

✅5/8" Metal Lathe Cutting Tool Holder - the material is 40Cr steel with durable and good anti-rust performance for SVJCR1616H16

✅11 Pieces Indexable Turning Inserts Cutter - the material is carbide with wear resistance and high temperature resistance, tipically used for finishing or semi-finishing steel and stainless steel

Insert: Grooving Insert MGMN300,External Threading Inserts 16ER A60 ,Turning Insert WC32.51（WCMT06T304),CC32.51 (CCMT09T304), DC32.51(DCMT11T304)

Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance

Designed for Steel, cast iron and non-ferrous materials

Carbide

TCMT221

C6