Best Aulpq in 2026

【Product Introduction】 Trailer bearing hub cap for ranger trail, for trailer boat, nitro, E-Z, and for vortex 81143 48355V replace K71-G01-73, 21-261.

【Product size】The trailer hub grease cap wheel center cap is 5.9" wide, 1.96" high and the outer thread diameter is 2 5/16"， convenient to replace your broken vortex 48355V caps whenever.

【Function】For Vortex hub kits and hubs with 5 bolts. Not compatible with 6-piece hubs. Fits 1250lb-1750lb lashing project Vortex hubs and other hub kits.

【Model】Refrigerator door handle fastener replacement model WR01X11007. Before ordering this part, refer to the modelaccessory information at the bottom of this page, replacement part numbers include AP5668500, 3031571, and PS6447735.These fasteners are suitable for certain models of refrigerator and stovetop handles. Not universal.

【High Quality】High quality fastener door handle - in line with OEM specification quality. Made of high-quality materials for a durable and precise fit.

【specification】 Includes (2) fasteners， Each dimension is about 1 inch long. These fasteners attach the handles to the frame. Be careful not to scratch the door when installing.

【COMPATIBLE】 692496005 Blade Adapter Compatible with Ridgid Adapter.

【FUNCTION】 For use with JobMax multi-tool head model R8223406. Note: Will not fit JobMax multi-tool model R8223404.

【QUALITY ASSURANCE】 Blade adapter made of durable, high quality materials. Compact and rugged, durable and the preferred OEM replacement part.

【Compatible part numbers】WR01X39781 Refrigerator Door Handle Fastener，for fits GE refrigerator door handle replacement and compatible with other part numbers AP7175647 PS16619453 WR01X25070.

【Use】Refrigerator door knob fastener allows your refrigerator door handle to connect to the refrigerator door, one piece two can make your refrigerator fully repaired.

【Safety Tip】When you install refrigerator door handle fasteners, please be sure to turn off the power for installation.

【Rich Hinge Pins】The package contains 9 door hinge pins, which are sufficient in quantity so that you can complete the repair and replacement work and have leftover parts to put away for later or share them with neighbors and colleagues.

【Strong quality】The hinge pin is made of high-quality stainless steel solid casting, stable and strong, not easy to break or wear, and the surface is oiled, and durable.

【Simple installation and use】Just remove the worn door hinge pin, then insert this new door hinge pin with soft oil, test the door closed, and repeat the test until the door closes without sound so that the perfect installation is completed.

Adapter for rave drain fittings.Fit Type: Universal Fit

3" bayonet lug fitting x 3" slip hub

Connects a sewer hose or cap

Replace: for axle hub grease caps, Axles Dexter 85-1, 085-001-00, Tiedown Engineering 88174, and AL-KO 085-016-0

Compatible with: Dexter 21-31-1, Redline RG04-040, Tiedown Engineering 81168 & AL-KO 021-041-01

Features: Preserves Grease Life and Prevent's Impurities From Entering the System

Fit Type: Vehicle Specific

【WITH EXTRA 4 SEALS】- You will receive 4pcs 2.72 inches trailer axle covers & 4pcs extra rubber plug, enough to meet your daily use or replacement. The extra 4 rubber plugs can be used as spare parts in case of emergency. This is a value-for-money set!

【HEAVY DUTY & ANTI-RUST】- These trailers dust caps are made of high quality steel and rubber, surface zinc-plated, strong and durable, not easy to deform, anti-corrosion & anti-rust, long-term service for your Trailer.

【PRACTICAL TRAILER PARTS】- The trailer axle cap is designed to avoid the trailer axle from dust, preserve the grease, prevent axle corrosion and as decoration. Hub grease caps are designed with removable rubber plugs, easy to install and maintain.

Cast galvanized wheel hub kit for boat trailers

Kit includes pre-greased bearings, seals, dust caps, lug nuts and a cotter pin

5 UHI lugs on a 4.5" bolt pattern

【WITH EXTRA 2 DUST CAPS & 4 SEALS】- You will receive 2 sets of 5x4.5'' trailer hubs(for 3,500 lbs axle) and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 2pcs dust caps & 4pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!

【HEAVY DUTY & ANTI-RUST】- These hardware are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion & anti-rust, long-term service for your trailer.

【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed.

4 inner bearings L68149 ID 1.378'' and 4 inner races L68111 OD 2.362'';

4 outer bearings L44649 ID 1.063'' and 4 outer races L44610 OD 1.980'';

4 double lip grease seals 10-19 (171255TB) 1.719'' x 2.565''.

【WITH EXTRA 4 SEALS】- You will receive 4pcs 1.98 inches trailer axle covers & 4pcs extra rubber plug, enough to meet your daily use or replacement. The extra 4 rubber plugs can be used as spare parts in case of emergency. This is a value-for-money set!

【HEAVY DUTY & ANTI-RUST】- These trailers dust caps are made of high quality carbon steel and rubber, surface zinc-plated, strong and durable, not easy to deform, anti-corrosion & anti-rust, long-term service for your trailer.

【PRACTICAL TRAILER PARTS】- The trailer axle cap is designed to avoid the trailer axle from dust, preserve the grease, prevent axle corrosion and as decoration. Hub grease caps are designed with removable rubber plugs, easy to install and maintain.

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

Spindle includes spindle nut, spindle washer, and cotter pin.

4-4" BT8 hub pre raced and studded.

4-pack Grease Cap Plugs for EZ Lube Grease Caps

Rubber Lube plugs for 1.18" dust cap hole

Dexter EZ Lube Grease Cap

【WITH EXTRA 2 DUST CAPS & 4 SEALS】- Fits 3500lbs 1-1/16'' to 1-3/8'' Trailer Axles, Spindle #84, EZ-Lube Axle. You will receive 1 set of 5x4.5'' trailer hub and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 1pc dust caps & 2pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!

【SIZE & COMPATIBLE WITH】- Trailer axle dust cap (O.D: 1.98''), L44649 outer bearings (I.D: 1-1/16''), L68149 inner bearings (I.D: 1-3/8''), Grease seals (2.56" O.D - 1.72" I.D), Lug nuts (1/2''-20 thread). Please check the size information and compatibility carefully before placing an order. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer.

【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed.

Control your door from anywhere.Connectivity Protocol:wi-fi,bluetooth.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

Connect your August Smart Lock to Wi-Fi. Requires North American outlet with 110-240 volt.

Always know that your door is locked. Requires iOS (9.0 or higher) or Android (5.0 or higher) smartphones

Inner Bearing Size - 1-3/8", Outer Bearing Size 1-1/16"

Axle Size - 3500lb

Wheel Bolt Pattern - 5 Lug on 4.5"

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

Spindle includes spindle nut, spindle washer, and cotter pin.

5-4.5" BT8 hub pre raced and studded.

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

2 inner bearings L68149 ID 1.378'' and 2 inner races L68111 OD 2.362'';

2 outer bearings L44649 ID 1.063'' and 2 outer races L44610 OD 1.980'';

2 double lip grease seals 10-19 (171255TB) 1.719'' x 2.565''.

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

5 studs 4.5" bolt circle (2 5/8" from center of one stud to the center of the next stud)

Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.

Fits a #84 Spindle using L68149 inner and L44649 outer bearing.

GENUINE REPLACEMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts

MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs

DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron

Set of 2 New trailer idler hub kits 5 on 5" for 3,500 lbs trailer axle

Bolt pattern: 5 on 5", bearing races and 1/2"-20 studs installed

Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2 x Grease seals 1.719" x 2.565", 2 x E Z lube grease caps with rubber plugs; 10 cone wheel nuts 1/2"-20 thread

Sufficient Wheel Replacements for You: you will receive 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement, can be stored for a long term, and can be also shared with friends or relatives who have a trailer

Notable Size Details: our trailer axle grease cap measures about 1.98 inches in diameter, 1-7/16 inch high, and the rubber plug is about 1.5 x 1.5 x 0.2 inches, fit for 2,000 to 3,500 lb trailer wheel hubs

Quality Material Selection: our trailer bearing dust cap is made of iron, a galvanized surface, sturdy and tough, strong against breakage and deform, corrosion and rust, serving your trailer for a long time

Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle

Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed

Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread

Pair of 1" straight spindles includes castle nuts and cotter pins.

Bearings included - (4) L-44643 1" inside dimension.

Hubs have pre-installed pressed in races.

1.This tool helps you remove the hub assemblies quickly and safer without damaging the axle.

2.There are enough flange bolts in the package to meet your needs as much as possible.

3.Simple Operation:Find the flange nut that suits you, then fix the 8629 hub removal tool on the hub, and then hit the end of the tool with a hammer until the hub is loose, then you can easily remove the hub