Best Aupract in 2026

✅This bearing puller contains six different sizes of extractor, can suppress a variety of different shapes, different sizes of bearings. Three new hooks are added for ease of dismantling.Do not damage removed parts.

✅This bearing and gear puller set is made of high-grade forged alloy steel for long-term durability especially collar, after heat treatment to handle even the most stubborn blind bearings and rings with no problem.

✅Applicable bearings: 6005/6006/6007/6008/6009/6010/6205/6206/6207/6208/6209/6210/6305/6306/6307/6308/6309/6310,Puller head: DL1/DL2/DL3/DL4/DL5/DL6.

STRONG SUCTION FORCE - This dent puller kit's maximum horizontal suction is 130 lbs, and the maximum vertical suction is 80 lbs.

PREMIUM MATERIAL - The handle of the suction cup dent puller is made of solid ABS which has extremely hardness, is welded to the sucker so firmly that the handle will not break easily, is solid and durable, has a long service time. The soft rubber pad is gentle on dent surfaces and won’t scratch the paint.

EASY TO USE - Clean and heat the dent with hot water, start operation from the shallow concave line then press hard and make sure the suction cup fits seamlessly, gently pull the suction cup up by using the handle, the dent surface will be pulled up with the dent puller.

27 millimeter

Heat treated

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.

Made with heat-treated, impact quality alloy steel.

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers

WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995)

EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process

The Gearwrench 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches

Off-corner loading design on box end provides better grip and reduces fastener rounding

Pass-thru technology works down any length of threaded rod and long bolts

ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.

INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!

COMMON APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.

The Gearwrench Hammer Puller Set provides a wide range of puller applications including flange type axles, oil seals, and other press fit Parts

Jaws can be set up for 2 or 3 jaw internal or external pulling jobs

5-1/2 lb slide hammer has a 5/8-18 thread

Gearwrench's Swivel Spark Plug designs provides better access to hard to reach spark plugs

Off-corner loading design reduces fastener rounding

Magnetic insert holds plug for removal and installation

Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access

Head rotates 180° through 14 locking positions for unparalleled access and leverage

Compact design allows for work in tight spaces

Gearwrench's Sensor and Sending Socket Set is designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches

Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units

Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units

This tool separates the rubber supports from exhaust hanger brackets.

The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

Accurately measures wear on all 1/2" pitch bicycle chains

Compatible with most 5-to-12 speed chains

Go/no-go gauge indicates .5% and .75% wear

Yukon Gear & Axle YDGGM8.5-3-30-1 Yukon Dura Grip Differential; 8.6 in. 10 Bolt; 30 Spline; 2.73 And Up;

Quickly Flushes Out Old Grease and Repacks Bearings with Less Mess..Fit Type: Universal

The Handy Packer works on bearings up to 3 1/2" O.D.

The grease stays in the tool cavity, not on your hands. To pack a bearing, place the bearing on the piston.

OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs

Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals

Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs

Gearwrench's Fan Clutch Service Set covers most vehicles with bolt on pulleys

Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing

Features the patented universal PULLEY holder

Removes and installs pressed-in type ball joints found on most vehicles

Changes ball joint without removing control arm from the vehicle

Tools can also be used to remove and install U Joints

Designed for oil and grease seals.Fit Type: Universal

Equipment Manufacturer (OEM) part that your vehicle came with.

parts can be challenging.

Pliers for removing electrical relays on most domestic and import vehicles

Offset handle and thin tips allow access to relays in confined areas

Also works on many heavy-duty and industrial applications

Removes Plastic Hold-Down Fasteners.

This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts

The tool is equipped with a sliding urethane button for use when extra leverage is necessary

Head Adjusts to 5 Positions.

Two hook sizes easily remove most oil and grease seals.

Where clearance is a problem, remove the pin to reposition the head.

9.5" overall length for reach

Use for seal pick and other general cleaning projects, including cotter pins

Blades are securely fixed in the handle so they do not twist during use

For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts

Plastisol grips for added comfort

9-inch Overall length

Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks

Includes 3 sizes of rear axle bearing pullers

Slide hammer tee bar and Slide hammer 5 LB head weight

Removes and installs steering wheel and lock plate

Durable storage case with step-by-step instructions

Precision-built to meet or exceed ANSI standards

INJECTOR REMOVAL TOOL: The ABN Diesel Fuel Injector Slide Puller is designed for removing stuck common-rail diesel injectors quickly and safely without dismantling the cylinder head for injector nozzle cars; The injector remover kit contains a 1.3-pound (.6 kg) shop hammer weight and M8, M12, M14 adapters

REPLACING OLD INJECTORS: Fuel injectors are important as they are what injects fuel directly into the cylinder, but because of their continuous use, they are prone to cracks, breaks, and minor physical wear; Symptoms of this issue can range from rough engine idle, slow acceleration, misfire, bad gas mileage, to gas leaks; This fuel injector tool helps to easily remove injectors for testing and cleaning as well as replacement

GREAT FOR BOSCH AND LUCAS INJECTORS: This kit includes a 7-inch (178 mm) bar and a 1.3 lb. (.6 kg) slap hammer weight along with M8, M12, M14 thread adapters; This injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors; Adaptors and slide hammer are stored in a convenient plastic box for storage and travel

GXL Carrier & Pinion Bearing Puller Dana 30, 40, 60, 70, 80, Ford 10.25 Clamshell Design

Ford 10.25" & Ford 10.5"

This tool is not used for removing pinion bearings on Dana 80.

Provides Ultimate Brute Strength for disassembling even the most seized and stubborn U-Joints in minutes on virtually all Class 7 and 8 trucks and machinery.

Application: Commonly found on class 7-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). U-joints with bearing cups 1.5″ to 2.2″ outside diameter, Spicer 1610, 1710, 1760, 1810, 1880 Series . Spicer SPL 140, 170, & 250 Life Series. Meritor (Rockwell) 16N, 17N, 18N, 1710 Series, Meritor RPL 20, 25 Permalube Series.

Manufactured from high-grade materials. Each glove is cast from high-grade steel to ensure the most universal fit possible while still maintaining the strength to tackle even the most stubborn U-joints.