Best Bluesunsolar in 2026

Condition: New Replacement Oil Separator Repair Kit

Package Included: 1PC Oil Separator Repair Kit

Part Number:21475228,21122541

【Condition】New Replacement Generator Electric Actuator + Speed Controller Governor

【Part Number】 ADC120-24V + ESD5500E

【Package Included】1x ESD5500E Speed Controller; 1x ADC120-24V Actuator

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.

【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.)

【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil.

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump

Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole; Manually suction fluid with the engine oil pump's oversized handle

Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom; The built-in shutoff prevents overfilling the reservoir

【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.

【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.

【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.

Replace Old or Worn Out Oil Passage Barbell

Prevent Oil Seepage in Your Oil Passage

Compatible with all GM LS Series Engines

✔4AN Fitting Turbo Oil Flange Built-In Restrictor Adapter Kit with Gaskets and Bolts Compatible with T3 T3/T4 Turbo Applications

✔Can Be used on Journal Bearing Turbos By Simply Drilling Through The Restrictor

✔ Includes 1 x Flange, 1 x Gasket, 2 x M8 x 1.25 Stainless Steel Bolts for bolting to turbo. 4AN Male Thread with 0.9mm (0.035") Restrictor.

【Certified 10 FT Military Drop Protection】: Only designed for Samsung Galaxy S23 6.1 Inch, 4 anti-collision structure corners and 360⁰ all-around powerful impact airbags disperses 99% impact force. It also can be dropped 3200+ times from 10 feet without damages, guaranteed with [MIL-STD-810G] standard, effectively protects your phone from drops, bumps, tumbles and scratches.

【2 Pack Tempered Glass Screen Protectors】: Screen Protectors for Galaxy S23 made of 9H Hardness Tempered Glass protects your phone screen from accidental drops and scratches. 0.33mm tempered glass maintains 99.99% response sensitivity. The bezels of 1.5mm over the screen provide additional full body protection. It supports fingerprint unlock.

【2 Pack HD Camera Lens Protector】: Specially designed black camera lens protector brings you the original beauty of every photo and video. Not affect the flash and also make light transmittance up to 99.99%. 1.5 mm lips over camera against accidentally dropping and scratching. Provide long-lasting clarify and keep the bright, colorful image quality.

This adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine. Seals to the block with a sealing washer.

1/4" NPT taper pipe thread port in the rear of the fitting allows for common sensors or plumbing fittings.

Compatible with all GM LS Series Engines

【PREMIUM RACING DIPSTICK / UPGRADE 】.....................【All Metal with BILLET / Anodized】 , Easy to read

★ 2007-2013 Cooper S Hardtop . . . . . . . . . . . . . ★ 2007-2013 Cooper Hardtop

★ 2008-2014 Clubman ALL . . . . . . . . . . . . . . . . . . ★ 2009-2015 Convertible ALL

Package Dimensions: 1.777 H x 9.652 L x 8.128 W (centimetres)

Country of Origin : China

Fit type: Vehicle Specific

Oil Feed Flange with -4AN Male Fitting With Built In Restricter For Ball Bearing Turbos

Can Be used on Journal Bearing Turbos By Simply Drilling Through The Restrictor

Designed to be bolted to the Turbo

Replace your old worn-out LS Oil Passage Diverter to prevent oil seepage or oil bypassing the oil filter. This is also a part that is overlooked when reassembling an engine which will cause little to no oil pressure resulting in engine failure.

Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines.

This installs in the oil galley hole behind the rear engine cover on the rear of the engine on the driver side. Non-O-ring end goes into block 1st. If you are not sure if your rebuilt or fresh rebuild with little or no oil pressure is missing this, you can remove the rear threaded oil galley plug above the oil filter location and see if you can see the shaft of this barbell through the hole. Comes with 1ea oil passage barbell.

Ftis GT25R/GT28R/GT28RS/GT30/GT35R & More

AN -4 , 7/16"-20UNF

Restrictor (Hole Size) :0.9mm (0.035")

-4AN Turbo Oil Feed Adapter Fitting 1.5mm Restrictor

Size(AN) :AN -4 , M12 x 1.5 mm

Materials :Aluminum

Compatible: Recommended solution fits for Garrett GT25, GT28, GTX28, GEN2 GTX28, GTX29, GT30, GTX30, GEN2 GTX30, GT35, GTX35, or GEN2 GTX35 series turbochargers.

Premium Quality: Quality metal material, lightweight, practical and durable.

Installation Location: Can be installed in any 4AN line to restrict flow to 0.035in. Simply install between an existing -4AN male and -4AN female connection within the oil feed line.

Compatible with all GM LS Series Engines inclued LS1 LS2 LS3 LS6 LS7 LS9 LQ4 LQ9 4.8L 5.3L 6.0L 6.2L LM7 LR4 L59 LM4 L33 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG L98 L9H L20 L94 LZ1 L99 L96 LC8 L77;Compatible with GM Gen III & IV Engines.

Directly to replace the factory plastic barbell，machining have less tolerance, makes the gap smaller,makes the gap smaller, so that it can prevent dust from entering oil and keep it clean.

It was designed with a little taper, which will makes oil flow smoothly,can effectively prevent the loss of engine oil, increasing the use of flow.

【Wide Range Of Applications】Fits LS1-2-3-6-7-9-LQ4-LQ9-4.8L-5.3L-6.0L-6.2L L92 LS4 L99 LSA & more.

【Excellent Alternative】Replace the plastic factory barbell,1/4-20 threaded hole in the end of the Barbell for easy removal.

【High Quality Material】CNC Billet 7075 billet aluminum material for long lasting durability.

Screws into existing lifter gallery

Orifice size is .0625" diameter

Fits both small and big block Chevy engines

Application: This oil separator billet catch can is compatible with Hellcat Charger Challenger Demon Trackhawk 2015-2020

Benefit: The oil separator could catch the oil and moisture from the air, prevent misfires due to carbon accumulation, keep the engine clean and extend engine life

Well-Made: Custom billet fittings, better quality and longer service life

Moroso Allen Head Oil Restrictors Merlin II Block 2 pc P/N 22017

THIS WON'T KINK EASILY - 2X More Kink Resistant than any other Fuel Hose

Cold Weather Flexibility down to -30°F with Award Winning Formulation. 8" Internal strain relief springs on each end of prevent kinking at coupling

Factory Crimped Chrome Plated Steel ends w/ 4 Finger Grip Bend Restrictos

Country of origin : United States

Part number: 22045

Fit type: Vehicle Specific

【Applicable Model】4AN oil restrictor thread fitting is replacement for GT35 T25 T28 T3 T4 Turbo. Please double check the size of your model before buying.

【Long Service Life】This oil feed adapter adopt high quality brass material processing, wear resistance characteristics, long service life. Sophisticated production, provides excellent quality, very stable performance and high work efficiency.

【Reliable】Oil restrictor has built in restrictor to supply proper oil pressure for the turbo, which is essential for the normal operation of the turbine.Without correct oil restrictor, turbo oil seal might be blown and leaking oil.

Made Of High Quality Copper

CNC Machined Cut

Easy To Install

Package Dimensions: 1.27 H x 9.652 L x 7.366 W (centimetres)

Country of Origin : China

Fit type: Vehicle Specific

Part number: 22016

Fit type: Vehicle Specific

Oem equivalent part number: 22016

100% Brand NEW & High Quality

High Quality Replacement Part

Compatible with VW---BEETLE 1999-2010 1.6 , 1.8T , 2.0 , 1.9TDI, VW---J-TTA 1999-2005 1.6 , 1.8T , 2.0 , 1.9TDI, VW---GOLF 1998-2005 1.6 , 1.8T , 2.0 , 1.9TDI, VW---BORA 1999-2005 1.6 , 1.8T , 2.0 , 1.9TDI, VW---PASSAT 1997-2005 1.6 , 1.8T , 2.0 , 1.9TDI, VW---POLO 2002-2008 1.8T , 2.0, VW---SHARAN 1996-2008 1.8T , 2.0 , 1.9TDI, VW---T-URAN 2003-2008 1.8T , 2.0 , 1.9TDI, VW---EUROVAN 2.0.

Application：For GT35, GT35R T25, T28, T3, T4, T6 Turbo

Size(AN) :AN-4 , 7/16""-24UNF

Restrictor (Hole Size) :1mm (0.035"")

【Anti-leak Seal】Male flare taper sealing surface that provides a positive anti-leak seal. Precision machined to ensure precise thread engagement. And the special design which can be easy to install and quick disconnect.

【Practical Design】Each fuel line EFI adaptor AN male quick disconnect push-on fitting is completed with a black anodized finish for corrosion protection.

【High Quality 】Oil Restrictor Fitting is made of high quality mild carbon steel, anticorrosion, high hardness, durable to use.Original standard, excellent replacement for the old or broken oil restrictor fitting.