Best Boyesen in 2026

The top reed is lightweight and resilient for crisp throttle response at partial throttle or low RPMs; the stiffer, bottom reed is ported to provide maximum flow and horsepower at higher RPMs

Longer overall life: Boyesen power reeds outlast all other aftermarket reed petals

Power reeds use a patented dual stage fiberglass design for more air flow, more air velocity and more power; minor change gives major horsepower improvements and fuel economy

for: cagiva 250 wmx 1984-1989; cagiva 260 all models; cagiva 500 wmx all models; husqvarna 260 all models, cr250 and wr250 1989-1998, wxc250 and wxe250 1996

for: kawasaki kx250 1983-1988, kx500 1986-2004, tecate 3 all models, tecate 4 all models; suzuki lt250 1987, lt500 1987, rm250 1981-1986, rm465 and rm500 all models

the top reed is lightweight and resilient for crisp throttle response at partial throttle or low rpms; the stiffer, bottom reed is ported to provide maximum flow and horsepower at higher rpms

Fits: Kawasaki KX250 1999-2000

The RAD valve's seamless, one-piece, precision casting and continuous aero form surfaces ensure maximum flow velocities and instant, explosive movement of air particles the moment you turn the throttle

Integrated into the seamless interior chamber are 4-way aerodynamic directional dividers that distribute the angled charge evenly without flow loss

Fits: Yamaha YZ125 2005-2013

Replacement Clutch Cover gasket

Seals perfectly to keep out dirt and moisture

An aero-form reed valve that corrects the problems associated with existing reed valve designs

Maintains flow velocity through the valve and re-directs the intake charge for even distribution to the intake ports

Provides quicker, sharper throttle response and more horsepower

Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Package Dimension : 7.18 " L x 5.37 " W x 1 " H

Item Package Weight : 0.62 pounds

Country of Origin: UNITED STATES

Made of aluminum with a natural finish.Material:Aluminum

Dual plane intake style

RPM range is idle to 5, 500 RPM

Dual plane intake style with an Air-Gap

Air-Gap design separates the runner from the heat of the lifter-valley cover

Temperature sending unit boss clears all water necks

Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of applications

Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins

GM-recommended replacement part for your GM vehicle’s original factory component

Fitment: Fits for Yamaha Grizzly YFM 600 Models, Year: 1998 1999 2000 2001

Fits on O.E.M and Aftermarket Carburetors. Part Number: 4WV-13596-00-00, 4WV135960000, 4WV-13596-00, 4WV1359600, 4WV1359600

This carburetor intake manifold boot is made of premium material, sturdy and resistant, good sealing performance

Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Brand New IMRC Intake Manifold Runner Control Valve Solenoid

Located In The Front Under Intake Manifold

See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model

Repair Kit Includes: 1 X Sonic Cruze Chevy 1.8L intake Manifold Tuning Valve Runner linkage Arm

This is a new OEM part. We ship worldwide. 2011 2012 2013 2014 2015 2016 2017 2018 Chevy Cruze - Sonic 1.8L engine intake manifold Tuning Valve Runner Actuator linkage , Rod , Arm - attaches to intake manifold AC delco 55570283 - this listing is for the actuator link arm only. This repair is associated with P2076 DTC Code. It is very easy to replace (install), No need to remove the intake Manifold, No tools required.

Fits other vehicles - Engine model #: N18XFH - Chevy - Daewoo - Fiat - Opel corsa astra GM 1.8 Liter I4 Ecotec LUW / LWE Engine

TUNING VALVE RUNNER ARM - TOP quality tuning valve runner arm, Our product is made of reinforced materials and last longer,You can replace old or damaged parts directly.This repair is associated with P2076 DTC Code. It is very easy to replace (install), No need to remove the intake Manifold, No tools required.

COMPATIBLE WITH FOLLOWING VEHICLES - Tuning Valve Runner Arm fit for Chevrolet Cruze - Sonic 1.8L Engine 2011-2018, GM 1.8 Liter I4 Ecotec LUW / LWE Engine, fits other vehicles - Engine model #: N18XFH - Chevy Sonic Cruze 2011-2018 1.8L Engine, please check the fitment in the product description below

REPLACE PART NUMBERS - 55570283 Please check the part numbers whether it suits your vehicle before purchasing.

Ideal replacement - this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - tested to ensure top-quality OEM performance and durability

Perfect fit - designed to match all specifications of the original part for convenient, trouble-free installation

Direct Replacement Intake Manifold Compatible with 1996-1998 Ford Mustang

Direct Replacement Intake Manifold Compatible with 1996-2000 Lincoln Town Car

Evan-Fischer EVA45272043318 Features: Black, Plastic

Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive oil consumption

Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete installation

Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and warping

Compatible with all GM LS series engines

Passenger side port adapter has two 1/8"npt ports, drivers side port adapter has one 1/8"npt port

Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum

Ideal replacement - this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines

Made in USA - designed, engineered and manufactured in the United States to deliver consistent quality and precise construction

Proven design - features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance

(Features NO.1) Increasing air flow 80%, Smooth unrestricted flow.

(Features NO.2) Improves throttle response.

(Features NO.3) Increases performance 25hp and 57lbs x ft. Torque.

Intake：L-104mm，Diameter-34mm

Air-out: L-102mm，Diameter-28mm

The picture can tell more than we can, what you see is what you will receive,please make sure it will fit your machine before bidding it.

100% brand new, never been used/ one piece design

Reinforced aluminum coolant Crossover - eliminates failure due to corrosion or vibration

Re-engineered reinforced plastic

precision built

package dimensions: 22.86 h x 66.04 l x 36.195 w (centimetres)

package weight: 16.749 pounds

Compatibility :Fit w/ 4-Cylinder Engine,2007-2009 Chrysler Sebring 2007-2014 Jeep Patriot 2007-2014 Jeep Compass 2007-2012 Dodge Caliber 2008-2009 Dodge Avenger 2009-2010 Dodge Journey

Replacement Part Number : 4884549AC,4884549AD,4884549AB,911-902,911902,8V1010,IMRC4,MRC1002

To provide higher performance and efficiency for the engine

【Vehicle Fitment】Compatible with Audi A3 2008-2013(Engines Code: CCTA/CBFA), TT 2009-201(Engines Code: CCTA); Compatible with Volkswagen Jetta/GTI 2008-2014/Beetle 2012-2014/CC2013-2017(Engines Code: CCTA/CBFA), Passat 2008-2010/Passat CC 2009-2012 (Engines Code: CCTA), Eos 2009-2016, Tiguan 2009-2017---Note: Only fit engine l4 2.0L

【Perfect fit】Ideal OEM replacement upper Intake Manifolds Kits. Taking the delicate technology design to match all specifications of the original part. Trustworthy design, simple installation and easy operation will save you much time.

【Reference Number】 (Make sure this part fits your vehicle exactly) OEM Number: 06J133201BD, 06J133201AL, 06J133185BM, 06J133201BH, 06J133185BN,06J133185DE, 06J133201AS, 06J133201G, 06J133201DF, 06J 133 201 BD, 06J 133 201 AL, 06J 133 185 BM, 06J 133 201 BH, 06J 133 185 BN,06J 133 185 DE, 06J 133 201 AS, 06J 133 201 G, 06J 133 201 DF

[PREMIUM QUALITY] The Control Solenoid Valve made of high quality material: Aluminum & Plastic, 100% tested before shipping. Replacement for Nissan Or Infiniti Models Listed With 3.5L or 4.0L V6 Engine.

[REPLACE PART NUMBERS] Intake manifold valve Manufacturer Part Number: 14955-8J10A, Interchange Part Number: RSC103, K5T46673, 149558J10A, 911-506, 911506, 246503, 50GEGT340JL, EGR2250-026.

[FITMENT] This Intake Manifold Runner Control Solenoid Valve replacement for Nissan Altima Frontier Maxima Murano Quest Pathfinder NV Xterra Infiniti. For Nissan VQ350DE/VQ40DE engine. Fits 2002-2015 ALTIMA 6 CYL 3.5L, 2005-2015 FRONTIER 6 CYL 4.0L, 2001-2014 MAXIMA 6 CYL 3.5L, 2003-2015 MURANO 6 CYL 3.5L, 2012-2014 NV 6 CYL 4.0L, 2005-2015 PATHFINDER 6 CYL 3.5L AND 4.0L, 2004-2015 QUEST 6 CYL 3.5L, 2005-2015 XTERRA 6 CYL 4.0L. ENGINE CODE FOR 3.5L-VQ35DE, ENGINE CODE FOR 4.0L VQ40DE.

Brand New IMRC Intake Manifold Runner Control Valve Solenoid

Also Called VIAS Variable Intake Air System Control Solenoid Valve

Also Called Purge Solenoid, Vent Control Solenoid, IMRC Valve Assembly

Uses symmetrical reed petals, no more inner and outer petals

Incorporates the industries first and only patented snap together reed valve design.  The entire assembly is completely screw free

Custom air guides specific to each individual application ensures maximum airflow

Red

Compatible with Volkswagen Based Dune Buggies