Best Chamberlain-Liftmaster in 2026

For garage door openers that currently have sensors installed

41A4373A Sensors are compatible with LiftMaster and Chamberlain Brand from 1993 - late 1990's

Each sensor has a green light and a bolt that runs right through the center of each sensor

Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current)

Also replaces some Chamberlain models

Same as Part number 25A18

REPLACEMENT KIT: Replaces broken or faulty safety beams in your Genie garage door opener’s Safe-T Beam system.

WORKS WITH MANY GENIE OPENERS: Compatible with Genie (only) garage door openers manufactured since 1993 that utilize required safety beams.

KEEPS FAMILY AND PETS SAFE: Places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the LED beam of light.

“Did I shut the garage” No more worrying.

Open or close your garage from anywhere. Simply download the free myQ app for iPhone or Android and get connected with your very own Smart Garage

Give access to family or friends while on the go

Product 1: Highly compatible details: The Original Clicker Universal Wireless Keypad provides trusted keyless garage or gate access universal frequency recognition identifies over 90 percentage of all garage door openers installed in North America; The Original Clicker Universal Wireless Keypad by Chamberlain is intended for use with residential door openers manufactured after 1993 that use photoelectric sensors; Any garage door opener that does not have these sensors installed and working should be replaced; Code type compatibility: Billion code 390 MHz, Security+ 390 MHz, Security+ 315 MHz, Linear MegaCode 318 MHz, Genie Intellicode 390 MHz and 315MHz, Stanley SecureCode 310 MHz

Product 1: Easy setup: Easy to follow wireless programming allows for setup in seconds and eliminates the need for electrical connections to the side of the garage opening

Product 1: Simply secure: Offers secure encryption to prevent hacking, and a backlit keypad illuminates the buttons for quick, keyless entry in any light via a personal 4 digit code, providing convenience, security and peace of mind

for Genie Intellicode openers (1997+)

visor clip and battery included

for ACSCTG Type 1

Wireless Design: No need for additional wiring as this keyless entry system is completely wireless

Easy to Use: Temporary password option and one-button-to-close feature makes it convenient to use

Battery-Operated: Wireless and keyless garage door keypad operates and comes with a 9-volt battery

Newer chamberlain manufactured garage openers including sears craftsman, chamberlain, LIFTMASTER

Newer chamberlain openers that currently have black brackets that clip onto the garage door track

Chamberlain openers that currently have 1 sensor with a green light & sensor with a yellow light

Standard Pulley Size: 3-inch diameter pulley is the standard DIY replacement for your old, noisy garage door pulleys. Each pulley is 200 lb. load rated for doors up to 400 lbs.

High Quality: Extra Heavy Duty Steel Construction, Case Hardened Race with 9 ball bearings, factory lubricated.

Maximum cable diameter 1/4", 3/8” bore size is the diameter of bolt.

includes gear and sprocket, worm gear, grease, motor shaft & sprocket bearings

compatible with chain driven 1/3 & 1/2 HP openers from Liftmaster, Sears, Craftsman & Chamberlain

1-Pack

This part is compatible with models including; 2060L,CM8600,ISD995-2WKM,PRO90S,CMD9900,IS550-1,IS550-2,AC SCREW DRIVE,ISL980,G2500,H4000,3560,PRO98S,CM7500S,H6000,H8000,IS850-2M,CM8500S,GXL-CL,36280S,36280R,IS550-2X,PRO99,CM7600,PLUS 3060L,4560,PRO95,IS525,GXL SERIES,IS920,ISD1000,2560,EXCELERATOR,IS-IMS-ISL A SERIES,IS-IMS-ISL B SERIES,ISD SERIES,IS900-1,ISL950,ISD990,IS900-2,GX SERIES,ISD995,ISD990-2,G SERIES

This Is A Manufacturer Substitution. Part May Differ In Appearance But Is A Functional Equivalent To Prior Parts Including; 20414R,25589C,25589S,25589S,34107R,36179R

Genuine Original Equipment Manufacturer (Oem) Part. Compatible Brands: Genie

For use with every Chamberlain garage door opener manufactured after 1997

Enhanced troubleshooting, most intuitive safety reversing sensors

Low profile reduces risk of being knocked out of alignment

🤓 SMARTEN EXISTING GARAGES: Universal adapter connects to existing openers & connects to wireless b/g/n so you can control from anywhere wirelessly.

🔈 WORKS WITH ALEXA, GOOGLE HOME, IPHONE, SIRI, ANDROID: Use any device including voice assistants, like Alexa, Ok Google, Siri, or even on smart watches.

🚘🚘 MULTI-CAR GARAGES: Have 1, 2, or 3+ garage doors? Our device works with any number of garage stalls - each garage door will require its own opener to control it.

The product is 8', new structural steel rail extension kit

Easy and simple use kit

The product is manufactured in China

Sears Craftsman Garage Door Opener Replacement White Main Gear 41A2817 2 Pack.

For garage door openers that currently have sensors installed

41A4373A Sensors are compatible with LiftMaster and Chamberlain Brand from 1993 - late 1990's

Each sensor has a green light and a bolt that runs right through the center of each sensor

Length: 233 in. 20 Grooves Per Six Inches

VERY IMPORTANT** LOOK AT PICTURES***MAKE SURE THE 2 ENDS OF THE BELT ARE THE SAME AS YOUR OLD BELT***

For use with various LiftMaster and Chamberlain Belt Drive Garage Door Openers.

Full belt assembly for use with Liftmaster/Chamberlain/Sentex belt drive models 2500, 2580, 2280, 3500, 3580, 3280

Full belt assembly for use with chamberlain belt drive models WD822k, WD922k, WD912k

For standard 7 foot high garage doors

Sold on Amazon

Long Range Sensing distance up to 50 ft.

Built-In Heater for dependable performance in most environments.

Alignment strength indicator signals optimal beam alignment. Requires power only on one side of the installation.

for Sears/Craftsman/Liftmaster garage openers 1993 - present

controls one garage door

includes visor clip

Fully compatible: the Chain Drive Rail Extension Kit for 8'-High Garage Doors is required for reliable, everyday operation of Chamberlain chain drive models in 8-ft. garage door applications..Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

Easy Setup: featuring a quick-install extension rail and replacement chain, the kit includes all necessary hardware and instructions for a quick and easy installation.

Includes one-year warranty, rail extension, replacement chain, all necessary hardware and an instruction manual for easy setup.

KEYED GARAGE DOOR EMERGENCY RELEASE: With this Genie Universal Emergency Release kit, you’ll have peace of mind that you can release your automatic garage door opener during power outages or if you forget your remote.

UNIVERSALLY COMPATIBLE: Compatible with all garage door openers, this keyed garage door emergency release kit can be used no matter what brand garage door opener you have.

EASY INSTALLATION: Installation is quick and easy –it attaches through the top of the garage door to let you release the garage door opener and manually open the door during a power outage or when you don’t have your remote.

Made of high quality heavy duty carbon steel, extra thick 6mm high strength steel, sturdy and anti-deformation, give you double defensive power, anti-rust black powder coating can provide anti-rust protection, perfect for door reinforcement or door barricade

2x4 door barricade brackets specially designed for standard 2x4 door barricade security bar, extra thick metal is strong enough to prevent any forced break-ins, used for door reinforcement and home security (Door barricade bar is not included)

Door barricade bracket works with all type of inswimg or outswing door sizes, reinforcement for house, barn door, shed bar, garage door, gate, backyard gate, fence gate, basement door, warehouse, chicken house door and more

Compatible with chain drive chamberlain sears craftsman manufactured operators 1984-current.

Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings.

Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.

Length: 233 in. 20 Grooves Per Six Inches

VERY IMPORTANT** LOOK AT PICTURES***MAKE SURE THE 2 ENDS OF THE BELT ARE THE SAME AS YOUR OLD BELT***

For use with various LiftMaster and Chamberlain Belt Drive Garage Door Openers.

EASY APPLICATION: 4" x 6" pre-cut design allows for a stress-free application without the need for any tools

ULTRA STRONG NON-DAMAGING MAGNETS: our heavy-duty magnets are built to stay on your metal garage door without worry damaging it

INSTANT CURB APPEAL: transform your garage in seconds by simply applying our magnetic window panes

LiftMaster Door Opener Receiver Logic Board replacement for board number 41AB050-2M

Match the 41Axxxx-xx part number found on the control panel of your garage door opener.

Well Built: Made of premium steel plated with zinc, which is strong and durable.

Size: Outer diameter-3 inch, inner diameter-3/8 inch.

Package Content: 2 pieces.