Best Chgidasl in 2026

✔ ---- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock.

✔ ---- Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" thickness, 2 pieces for each thickness.

✔ ---- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.

SUPER STRONG AND DURABLE: TUFFBOY Plastic wedge shims are stackable and made of 100% high quality recycled plastic materials, that has a 30% more load support and pressure than wooden shims, making it perfect for all your leveling, repairs, and home improvement projects.

INDOOR/OUTDOOR MULTI-USE WEDGES: The 8-inch composite shims can be used for a wide variety of different projects both indoors and outdoors. Use TUFFBOY Heavy Duty Shims for Leveling, Plumbing, Appliances, Cabinets, Countertops, Doors, Windows, Furniture, Decks, Spas, Fountains, Gazebos, Mailboxes and more!

NEVER-ROT AND WEATHER PROOF: The Durable material of these Never Rot shim levelers is Water proof and resistant to decay. Unlike wooden shims, these plastic shims will not rot, warp, swell, crack, or split, holding up to rain, show and other tough or extreme outdoor conditions. TuffBoy composite shims will last you a lifetime.

Reliable material: brass round rods bars are made of quality H59 brass, no harm to human

Size: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm in diameter, 100 mm in length, diverse sizes to meet your different needs

Well wrapped: these solid brass rods are stored in a plastic box, convenient to organize and pick, portable to keep these brass bars in order

Alloys 260 1/4 hard ASTM B134

High Quality; Pure Brass

REACH/ROHS/Hazardous Minerals Compliant

Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!

Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime.

No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need - no tools required!

Assortment of 6" wide by 50" long rolls contains 1 each of the following thicknesses: 0.001", 0.002", 0.003", and 0.005"

Made from a full hard, cold rolled, low carbon 1008-1010 steel

0.001", 0.002", 0.003", 0.005"

6" by 12" assortment contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031"

Made from a full hard, cold rolled, low carbon 1008-1010 steel

0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031"

Use for modeling, engineering and architecture projects

Solid brass finish

Shrink-wrapped

For hobby, craft and model building

Shrink-wrapped

Refill for 6400 sheet metal rack

Assortment of 6" wide by 12" long sheets contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", and 0.015"

Made from a half hard, cold rolled, 260 alloy brass

0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015"

Assortment contains 1 of each thickness: 0.0005", 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.0075", 0.010", 0.0125", 0.015", 0.020", 0.025", and 0.030"

Color coded shim is made from a high quality plastic material

0.0005", 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.0075", 0.010", 0.0125", 0.015", 0.020", 0.025", 0.030"

Item Package Height: 17.8 Centimeters

Item Package Length: 7.7 Centimeters

Item Package Width: 8.0 Centimeters

5x7mm Dia. Steel Shim Pack 10ea 0.1, 0.2, 0.3, 0.5mm Width / Thickness.

Made from a full hard, cold rolled, 300 series stainless steel

Precision Brand's stainless steel shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability

Widely used in applications where corrosion resistance is required

MADE WITH "BEDDAR WOOD": Meet the newest innovation in shims. Beddar wood is uniquely processed to provide a shim that performs better than any other shim on the market, consistently performing better than pine or cedar.

PREMIUM PERFORMANCE: Our 12" shims are easy to score & cut and are split resistant to nails & screws. They have an excellent snap that breaks off clearly and thin-feathered tips, making them flexible for use. Additionally, they are a 100% usable bundle of shims.

100% KILN DRIED: This results in no molding or rotting. Our wood does not shrink either.

With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock.

Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up.

Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.

Brass Shim is made from a half hard, cold rolled, 260 alloy brass

Used in applications where corrosion problems exist; low magnetic permeability

Excellent forming qualities and may be lightly drawn, blanked or stamped

Corrosion Resistant and Rustproof: 304 stainless steel sheet is made of quality 304 stainless steel, which has good corrosion resistance and is loved by people; It is also rust proof

Bendable and Cuttable: the trim strip has good bending ability and can be machined or cut into various parts; It can be freely DIY bent and cut into the desired shape for your long term use

Stainless Steel Shim Stock Dimension: the metal strip is approx. 31 cm/ 12 inch in length, 2.54 cm/ 1 inch in width, and 0.6 mm/ 0.02 inch in thickness, which is suitable for your use

With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock.

Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up.

Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,1/8"（3mm） x 1"（25mm） x 12"（305mm）

With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock.

Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up

Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.

With 9 thicknesses to meet your different needs, this is a great value set of variety sizes carbon steel shim stock.

Metal shim stock assortment size: 12" Length x 6" Width, 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015" Thick. Clean and corrosion free.

Shim stock is made of full hard, cold rolled, low carbon 1008-1010 steel, nice bend-ability and excellent machinability, can be used in different applications.

*Copper Shim Stock Roll is made of 99.9% Pure Copper, Soft(Annealed), Copper Grade 110 with Low Oxygen Content and Good Electrical and Thermal Conductivity.

*Sieze: 0.003" Thickness x 6" Width x 100" Length. We have 4 thicknesses to meet your different needs.

*Copper 110 Annealed is noted for its high electrical and thermal conductivity and good corrosion resistance that is easily machined and formed.

Quantity: 3 Pcs 6" x 6", 20 Gauge(0.81mm) brass sheets

Material:C280 brass Sheets. Easy to be cut and soldered

Double-side Film: Every brass sheet has two sides films, which can protect the surface of brass to prevent scratches

✿---- If you are a professional tool or die maker, or a machine maintenance engineer, you may often need these precision gaskets, you can prepare some for emergency use.

✿---- Our spring steel shim sheet assortment including 6 popular thickness（0.004", 0.008", 0.015", 0.02", 0.024", 0.03" ）to meet your various need, great value and practical.

✿---- Spring steel shim sheet is made of high carbon blue tempered spring steel which has a excellent processing performance, can cut or weld according your reqirement.

Made in US

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,1/4"（6mm） x 1"（25mm） x 12"（305mm））

✔ 304 stainless steel strips are made of premium 304 stainless steel which has excellent rust & corrosion resistance performance and widely loved by people.

✔ Stainless steel shims are bendable, smooth surface without burrs, can be machined or cut into various parts such as gaskets, washers, shims and spacers.

✔ With 6 popular thicknesses to meet your various needs, 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005" thickness,6" length x 1" width, 2 pieces for each thickness.

Material: Brass 360

Size: 6"x6"x24 Gauge(152.4x152.4x0.8mm)

Metal sheets plates has good mechanical properties, easy brazing and welding, and resistance to corrosion