Best Uuvzvcek in 2026

With 9 thicknesses to meet your different needs, this is a great value set of variety sizes carbon steel shim stock.

Metal shim stock assortment size: 12" Length x 6" Width, 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015" Thick. Clean and corrosion free.

Shim stock is made of full hard, cold rolled, low carbon 1008-1010 steel, nice bend-ability and excellent machinability, can be used in different applications.

★EXTRA LONG: 36" / 91CM Long is very suitable for some special applications that require longer aluminum round tube, this is short aluminum tube can not achieve.

★SUPERIOR MATERIAL: Our round aluminum tubes are made of 6063 aluminium which has a better performance in corrosion resistance and weldability than other aluminum round tube,high strength and durable.

★EXCELLENT MACHINABILITY: 6063 aluminum round tube has good machinability, easy to cut and drill, also can be welded, easy to use, you will never be disappointed.

★VALUABLE PACK: Package including 4 assorted gauges brass square wire,16, 18, 20, 22 Gauge can meet your different needs, isn’t great?

★IDEAL CHOICE: If you are a DIY enthusiast, then you should consider bringing these brass square wires home, the first choice of jewelry making and other DIY craft project.

★PREMIUM MATERIAL: Brass square wire is made of high quality brass,which has excellent machinablity & ductility, easy to bend or twist.Square wire sometimes is better than round wire in some jewelry craft projects.

SUPER STRONG AND DURABLE: TUFFBOY Plastic wedge shims are stackable and made of 100% high quality recycled plastic materials, that has a 30% more load support and pressure than wooden shims, making it perfect for all your leveling, repairs, and home improvement projects.

INDOOR/OUTDOOR MULTI-USE WEDGES: The 8-inch composite shims can be used for a wide variety of different projects both indoors and outdoors. Use TUFFBOY Heavy Duty Shims for Leveling, Plumbing, Appliances, Cabinets, Countertops, Doors, Windows, Furniture, Decks, Spas, Fountains, Gazebos, Mailboxes and more!

NEVER-ROT AND WEATHER PROOF: The Durable material of these Never Rot shim levelers is Water proof and resistant to decay. Unlike wooden shims, these plastic shims will not rot, warp, swell, crack, or split, holding up to rain, show and other tough or extreme outdoor conditions. TuffBoy composite shims will last you a lifetime.

Reliable material: brass round rods bars are made of quality H59 brass, no harm to human

Size: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm in diameter, 100 mm in length, diverse sizes to meet your different needs

Well wrapped: these solid brass rods are stored in a plastic box, convenient to organize and pick, portable to keep these brass bars in order

Alloys 260 1/4 hard ASTM B134

High Quality; Pure Brass

REACH/ROHS/Hazardous Minerals Compliant

Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!

Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime.

No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need - no tools required!

Assortment of 6" wide by 50" long rolls contains 1 each of the following thicknesses: 0.001", 0.002", 0.003", and 0.005"

Made from a full hard, cold rolled, low carbon 1008-1010 steel

0.001", 0.002", 0.003", 0.005"

6" by 12" assortment contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031"

Made from a full hard, cold rolled, low carbon 1008-1010 steel

0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031"

Use for modeling, engineering and architecture projects

Solid brass finish

Shrink-wrapped

For hobby, craft and model building

Shrink-wrapped

Refill for 6400 sheet metal rack

Assortment of 6" wide by 12" long sheets contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", and 0.015"

Made from a half hard, cold rolled, 260 alloy brass

0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015"

Assortment contains 1 of each thickness: 0.0005", 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.0075", 0.010", 0.0125", 0.015", 0.020", 0.025", and 0.030"

Color coded shim is made from a high quality plastic material

0.0005", 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.0075", 0.010", 0.0125", 0.015", 0.020", 0.025", 0.030"

Item Package Height: 17.8 Centimeters

Item Package Length: 7.7 Centimeters

Item Package Width: 8.0 Centimeters

5x7mm Dia. Steel Shim Pack 10ea 0.1, 0.2, 0.3, 0.5mm Width / Thickness.

Made from a full hard, cold rolled, 300 series stainless steel

Precision Brand's stainless steel shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability

Widely used in applications where corrosion resistance is required

MADE WITH "BEDDAR WOOD": Meet the newest innovation in shims. Beddar wood is uniquely processed to provide a shim that performs better than any other shim on the market, consistently performing better than pine or cedar.

PREMIUM PERFORMANCE: Our 12" shims are easy to score & cut and are split resistant to nails & screws. They have an excellent snap that breaks off clearly and thin-feathered tips, making them flexible for use. Additionally, they are a 100% usable bundle of shims.

100% KILN DRIED: This results in no molding or rotting. Our wood does not shrink either.

With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock.

Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up.

Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.

Corrosion Resistant and Rustproof: 304 stainless steel sheet is made of quality 304 stainless steel, which has good corrosion resistance and is loved by people; It is also rust proof

Bendable and Cuttable: the trim strip has good bending ability and can be machined or cut into various parts; It can be freely DIY bent and cut into the desired shape for your long term use

Stainless Steel Shim Stock Dimension: the metal strip is approx. 31 cm/ 12 inch in length, 2.54 cm/ 1 inch in width, and 0.6 mm/ 0.02 inch in thickness, which is suitable for your use

With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock.

Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up.

Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.

With 9 thicknesses to meet your different needs, this is a great value set of variety sizes carbon steel shim stock.

Metal shim stock assortment size: 12" Length x 6" Width, 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015" Thick. Clean and corrosion free.

Shim stock is made of full hard, cold rolled, low carbon 1008-1010 steel, nice bend-ability and excellent machinability, can be used in different applications.

✿---- If you are a professional tool or die maker, or a machine maintenance engineer, you may often need these precision gaskets, you can prepare some for emergency use.

✿---- Our spring steel shim sheet assortment including 6 popular thickness（0.004", 0.008", 0.015", 0.02", 0.024", 0.03" ）to meet your various need, great value and practical.

✿---- Spring steel shim sheet is made of high carbon blue tempered spring steel which has a excellent processing performance, can cut or weld according your reqirement.

Material:C360 Brass Flat BAR

Features:Good material for DIY craft making

Package Quantity:1pcs,1/4"（6mm） x 1"（25mm） x 12"（305mm））

✔ 304 stainless steel strips are made of premium 304 stainless steel which has excellent rust & corrosion resistance performance and widely loved by people.

✔ Stainless steel shims are bendable, smooth surface without burrs, can be machined or cut into various parts such as gaskets, washers, shims and spacers.

✔ With 6 popular thicknesses to meet your various needs, 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005" thickness,6" length x 1" width, 2 pieces for each thickness.

Sufficient to Use: there are 30 pieces of 304 stainless steel strips in the package, which are enough to meet your various needs and replacements; The dimension is approx. 12 x 1 x 0.02 inches, which is proper to use

Durable and Flexible: the stainless steel shim is made of quality 304 stainless steel, which is lightweight, strong, with excellent corrosion resistance, rust resistance, available for long term use

Bendable and Cuttable: you can bend the stainless steel trim into different shapes you need, and you can also cut the stainless steel gap filler into different length or various parts according to your actual needs

✔ ---- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock.

✔ ---- Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" thickness, 2 pieces for each thickness.

✔ ---- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers.

💡   </strong>Heavy Duty Shim LEVELING (Stronger than wood).

💡    </strong>Adjustable thickness and length with easy snap. 

💡  </strong>Easy to separate. Excellent compressive strength.

6" by 18" assortment contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031"

Made from a full hard, cold rolled, low carbon 1008-1010 steel

Precision Brand's steel shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability

Sturdy Material: our shim sheet is made of 304 stainless steel material, rust and corrosion resistant, sturdy and strong, not easy to break or fade, so you can buy and use it with confidence

Convenient in Daily Life: these stainless steel strips are bendable that they allow you to machine or cut into various parts, like washers, metal shims, spacers and so on; Also, you can DIY crafts according to your imagination

Size Information: these stainless steel shims measure about 152.4 x 25.4 mm/ 6 x 1 inches, featuring various kinds of thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses