Best Cle-Line in 2026

1875 13 Piece set 1/16-1/4 x 64

Set range: 1/16-inch - 1/4-inch

Cle-Line is a familiar name to users of quality cutting tools

1875 29 Piece set 1/16-1/2 x 64

Set range: 1/16-inch - 1/2-inch

Cle-Line is a familiar name to users of quality cutting tools

29P 1875 1/16-1/2X64 black and gold mechanics bit barrel

Set range: 1/16-inch - 1/2-inch

Cle-Line is a familiar name to users of quality cutting tools

1-5/8" G&B CONSTRUCTIONREAMER BRIDGE LENGTH<br /><br />Country of Origin: UNITED STATES<br /><br /><

1-1/2" G&B CONSTRUCTIONREAMER BRIDGE LENGTH<br /><br />Country of Origin: UNITED STATES<br /><br /><

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools

Hex shank drills are designed for handheld applications in power tools that accept hex shanks.

1-7/16" G&B CONSTRUCTIONREAMER BRIDGE LENGTH<br /><br />Country of Origin: UNITED STATES<br /><br />

5/8" G&B CONSTRUCTION REAMER BRIDGE LENGTH<br /><br />Country of Origin: UNITED STATES<br /><br /><s

1-3/16" G&B CONSTRUCTIONREAMER BRIDGE LENGTH<br /><br />Country of Origin: UNITED STATES<br /><br />

29 pc. Set Premium Mechanic 3-Flats on Shank 135-Degree Split Point

135-Degree split point for accurate centering and fast penetration

Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

1/2" Diameter X 12" Long Auger Drill Bit with a 3/8" Hex Shank

Made of Carbon Steel. Solid Center Design for extra rigidity while boring.

Perfect for drilling into soft and hardwood, MDF, Plywood, Lumber, Railroad Ties, Landscape Timber, Invisible Floating Shelf Bracket Installation, tree stump boring, for up to 10” deep hole. Easy to bore into tree stump, lumber, landscape timber and railroad ties.

Killer force drills (kfd) have a heavy-duty 135° split point for self-centering and reducing thrust. black/Gold drills are manufactured from premium grade high speed steel

Gold and black surface treated for use in stainless steel and other hard metal drilling

Round shanks allow use with a wide variety of tool holding systems

Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum

Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits

High-heat resistant bits – withstand high-temperature applications for extended periods of time

JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank

MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits

CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits

29 pc. Ultra Dex Set Premium High Speed Steel Heavy Duty NAS 907B 135-Degree Split Point

1/16 - 1/2 by 64ths - Ultra Dex

Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance

Sizes: 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 11/64 in., 3/16 in., 13/64 in., 7/32 in., 15/64 in., 1/4 in., 17/64 in., 9/32 in., 19/64 in., 5/16 in., 21/64 in., 11/32 in., 23/64 in., 3/8 in., 25/64 in., 13/32 in., 27/64 in., 7/16 in., 29/64 in., 15/32 in., 31/64 in., 1/2 in.

Enlarge existing holes

Drill through sheet metal, hard steel, acrylics and brass

115 PIECES INCLUDED: 29pcs Fractional Size:1/16” to 1/2” in 1/64th increments; 26pcs Letter Size: A To Z; 60pcs Numbered Size: #1 To #60.

HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance.

PRECISE 135° SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)

Rigid, thick web design adds stability to bit in tough applications

Surface hardened to penetrate tough abrasive materials

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge

Round shanks allow use with a wide variety of tool holding systems

Norseman Drill & Tool 46962 Type 190-AQF Premium Ultra-Dex Bully

29 Piece Jobber Length Drill Bit Set

Three Flats Shank in Orange Case

Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.

3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.

This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.

【10Pcs 3/16" Cobalt Drill Bits】10Pcs - 3/16”(Dia 4.76mm) x2-5/16”(Flute Length 58.74mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization.

【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, much harder than HSS used in other similar drill bits set. These drill bits contain 5% Cobalt, which increases wear-resistance and durability.

【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed.

Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.

Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.

Package & Size: 12 Pieces in a plastic bag, Diameter 5/16 inch, Total length 4 inch, Working length 2-3/4 inch.

Premium 6% Cobalt Steel ,66-69 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.

Grinding the Cutting Edge Three Times,with the High HRC and Heat Resistance of the Material,Desigh for Cutting through Stainless steel , Iron plate, Aluminum,Ducts,Wood,PVC and Plastic.

This Cobalt Drill Bit is Typically Capable of Running Two to Three Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

29 pc. Ultra Dex Premium Mechanic 3-Flats on Shank 135-Degree Split Point

135-Degree split point for accurate centering and fast penetration

Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance

【M35 COBALT HIGH SPEED STEEL】1/4" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses

【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster

【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance