Best Conoco in 2026

Meets Caterpillar and Terex requirements for 5 percent moly grease

High dropping point (500 )

High load-carrying capacity

A highly refined blend of aluminum, copper, and graphite lubricants that is salt, corrosion, and moisture resistant

Use for easy assembly and disassembly of metal parts; enables easier disassembly of parts exposed to high temperatures

Use during assembly to prevent galling, corrosion, and seizing due to weathering or chemicals

MIL-G-21164D for upper receiver threads, barrel nut installation and buffer tube installation

High quality lube good for any number of applications, exercise equipment, hinges, reels, ball bearings, bicycle gears, even telescope mounts

Aeroshell 64 / Aeroshell 33 MS sets the standard with exceptional anti-corrosion and anti-wear performance

LOCKS ON, DOES NOT LEAK: Grease goes in, not on the machine. LockNLube’s unique sliding sleeve ensures that when the jaws are locked onto the Zerk, a leak-proof seal is created.

ONLY REBUILDABLE COUPLER: All LockNLube couplers include a rebuild kit! Simply replace the seal and jaws and it is as good as new = lowest lifetime cost.

COMPATIBLE WITH ALL GREASE GUNS AND ZERK FITTINGS: 1/8" NPT works with all grease guns and manufacturers – pneumatic, manual, or electric. Locks on to all Metric and SAE specification Zerks.

ALL-WEATHER GUN LUBRICANT OIL - Gun Butter’s Pen Oiler not only makes your gun more durable, but it also lubricates your gun properly to ensure optimal performance every time you clean it! The all-weather lubricant will not burn up or evaporate in summer’s heat; it functions normally in freezing weather and salt air, stays intact during pouring rain, and repels dust and airborne sand in dry conditions which cause wear and failure. It also inhibits corrosion, preventing the formation of rust.

ENHANCED FOR EXTREME TEMPERATURES - The most advanced lubricant for heavy weaponry, as well as your pistol, handgun, rifle, shotgun or firearm of your choice, Gun Butter Oil is not grease, but a gun lube and cleaner that has enhanced lubricity for extreme temperatures and humidity; its oil will resist change and perform consistently below -20 degrees to over 400 degrees Fahrenheit. Gun Butter’s smoothness and consistency is unmatched due to its ease of function.

BREAK IN PROTECTION & CLINGABILITY - Ideal for armed forces, police, and top shooting professionals, this high-performing gun lubricant gives break-in protection and clingability (film strength) to maintain its placement. Gun Butter’s gun lubricant cleans, lubricates, and protects metal from rust, moisture, and dramatically reduces wear during all shooting conditions. Gun Butter provides the maintenance your gun needs so that you can use it for a longer period of time.

DEWALT grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI

High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.

DEWALT 20V grease gun kit can control grease flow with the variable speed trigger

Industry leading 10,000 PSI max operating pressure

48" flexible hose offers greater access to difficult to reach fittings

Air bleeder valve for quick priming

DEWALT grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI

High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.

The battery operated grease gun can control grease flow with the variable speed trigger

USED BY U.S. SPECIAL FORCES WORLDWIDE: TW25B is uniquely engineered, made in America and is used by U.S. Special Forces.

SUPER LUBRICATION and PROTECTION: Preferred lubricant on heavy weaponry, AR's, all firearms, shotguns and handguns while protecting wear parts and bore.

OPTIMIZED FOR PERFORMANCE and REDUCED MAINTENANCE: Ensures firing reliability in extreme temperature conditions ( -90°F (-67°C) to +450°F (232°C) and is the most durable extreme performance lubricant available.

Sil-Glyde Brake Lubricant is recommended for the entire brake assembly, compatible with plastic and rubber (EPDM & Nitrile)

Provides a noise-free brake installation and easy disassembly

Eliminates disc brake squeal and protecting parts from corrosion and rust, and dampens vibrations between contact points

Marine Grease 2-4-C with PTFE is a high-quality, versatile lithium‑based NLGI 2 grease that won’t break down in the presence of water

Excellent general-purpose teflon grease for steering system cables, throttle and shift cables, tilt lock mechanisms, tilt tube, remote controls, prop shaft, swivel pins and trailer wheel bearings

Contains extreme pressure additives to withstand friction in a wide variety of heavy equipment applications and temperatures

100% synthetic formula with ceramic solids forming a premium quality brake lubricant

Resistant to moisture, corrosion and contaminants - will not wash out

Silences brake noise across a much wider temperature range and maintains lubricant integrity

All-purpose white lubricant for metal-to-metal and metal-to-plastic applications

Withstands moisture and high heat

Protects against rust and makes surfaces friction-free

Meets NLGI-2 performance

Fully automatic with continuous operation and grease flow.Fit Type: Universal Fit

Variable-speed trigger provides excellent grease flow control

30 inch high-pressure hose with coupler and attachment clip

Extra reach for hard to reach grease fittings

Snaps directly onto a jaw type coupler to reach grease fittings in very tight spaces

Works best with the LockNLube Grease Coupler

Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on.

Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure.

Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler.

For all U.S., European & Japanese Vehicles

Provides superior high- and low-temperature protection (-60°F to 425°F) over conventional greases

Moly-fortified for increased film strength and exceptional resistance to heavy loads

Temp Range: -36C thru 204C: Viscosity 18cSt/100C, 160cSt/40C; Stable in a wide variety of operating conditions/environments

Nonflammable: Krytox Grease contains only carbon, oxygen & fluorine, (no hydrogen or silicone); Will not burn or support combustion; Passes impact standards with LOX, Nitrogen Tetroxide, Nitric Acid

Chemically Inert: Resistant to oxygen and inert to most all chemicals; Inert nature allows Krytox Grease to outlast/outperform hydrocarbon products; Chemically insoluble in nearly all solvents

The 5803 easily screws directly onto any hand-held grease gun.

Overall length is 2.76 Inches.

Standard 1/8 In. NPT (f) screw-on style thread connects to both rigid extensions as well as flexible hoses with a 1/8 Inch NPT (m) connection.

Formulated to provide extreme pressure and high temperature protection

Lubricates at temperatures ranging from 0°F to 375°F

NLGI #2 Grade GC-LB Lithium Complex EP Grease

Genuine OEM Yamaha product

Yamalube Molybdenum Disulfide Grease - 4.5oz

Non-corrosive and water-resistant

The product is easy to use

The product is durable

The product is manufactured in China

Develop over 10,000 PSI without batteries

Patented pressure return valve easily clears pressure from the hose and returns it to the canister with no mess.

Includes the LockNLube Grease Coupler, 10 ft. hose, and the G.Scoop to easily and cleanly refill with bulk grease

Anti-Mess Grease Pump: Single-hand held grease gun with zinc-plated steel barrel provides a more clean and efficient way of greasing

Kit Includes: A one-hand pistol grip grease gun, 500mm high-pressure nylon hose, 10 AirTec G200 multipurpose grease tubes, and 4-jaw hydraulic coupler

High Pressure Capability: Grease gun pistol ensures function under pressures as high as 300 bar (4,350 PSI) and multiple braid burst pressure of 1,000 bar (14,450 PSI)

Aeroshell 33 MS grease in a hard to find size.

Mil-Spec grease in easy to use quarter ounce container for use with guns and other smaller applications.

MIL-G-21164D - Approved AR Grease / AR Grease / Gun Grease

M18 48" Grease Gun Hose W/Coupler

The product is easy to use and easy to handle

The product is highly durable

1 Year warranty on material and workmanship

This product meets customer requirement

Product is manufactured in Mexico

10,000 PSI and 7.5 oz./minute flow rate for maximum efficiency

Steel grease tube for maximum durability

On-board LED work light helps to illuminate workspace